QUICK START GUIDE 1844, 1842 SERIES
Assembly Instructions
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
161-1033 01/17
TM
9. With the base unit and reservoir
on a table, extend the hose and
nozzle to the mat or towel on
floor and spray trigger for 15-20
seconds until solution dispenses.
8. Set Rinse/Shampoo switch to
desired setting. For Shampoo, the
reservoir will dispense a mixture
of shampoo and water; for Rinse,
it will dispense just water.
7. Hold the tool horizontally on a flat surface (such as table or counter
top) and attach it to the cleaner by inserting the flex hose connector into
the shampoo tool connector. You will hear a “click” when it locks in place.
4. Locate the bathing tool and
twist cap on the shampoo tank
counter-clockwise to open.
3. Turn machine ON and press the
flex hose trigger for 15-20 seconds
to allow water to dispense on a
microfiber mat or towel.
5. Hold tool right side up and add
BISSELL No-Rinse Dog Shampoo
to the shampoo reservoir.
2. Before connecting the bathing
tool, place the unit on a high, flat
surface and extend the hose to a
microfiber mat or towel on floor.
1. Get ready to prime the system.
Fill the base unit clean water tank
with warm-to-the-touch tap water
to the fill line.
6. Align screw cap with tabs of
reservoir opening and twist shut.
