bitmore E-PRO BM-QIP10 User manual

1
0
0
%
R
E
C
Y
C
L
E
D
P
L
A
S
T
I
C
E-PRO 10W POWER PAD
USER GUIDE

IMPORTANT: READ AND RETAIN THIS MANUAL BEFORE FIRST USE!
SPECIFICATION:
Input: Micro USB DC9V 1.5A
Wireless Output: 10W
Input ports: Type-C & Micro USB (DC5V=2A (max)
Material: Recycled ABS + Silicone
Size: OD99.0*7.5mm
BMQIP10 EPRO POWER 10W PAD  1
EPRO 10W POWER PAD
Product overview:
1. Wireless charging indicator
2. Type C input port

CHARGING THE EPRO POWER PAD:
1. Connect the supplied Type C USB cable to the Type C port on the e-Pro 10W Power Pad
2. Connect the other end of the cable to the mains (adaptor not included)
3. Place your Qi enabled device on the raised charging area, a red LED indicates charging
4. A small light will illuminate when charging
Please note: Each Qi device (smartphones etc) charging coil is positioned dierently, you may
need to test the optimal position of your device on the charging pad, this is usually centered on
the charging pad (as shown) for the wireless charging wire to work. Some device cases may
prevent charging or optimal charging, and cause overheating, remove them before use. Check
with your device manufacturer for compatibility.
IMPORTANT:
For optimal performance and to use the 10W fast charging capability, please use a QC compati-
ble power adaptor (not supplied) and USB Type C that supports fast charging.
If you do not put your Qi enabled device in the correct charging position, your device and the
charging pad may become hot. This is due the receiving coil in your device and the charging coil
in the charging pad not being properly aligned. Placing metallic objects on the charging pad or
your device may also cause your device, charging pad or those objects to get hot. When using
the charging pad with your Qi enabled device, ensure it is in the correct position as shown above,
ensure that you remove any case on your device and that there are no metallic objects on your
device or the charging pad.
The charging pad has built in overcurrent protection. If the charging pad is used improperly and
the instructions in this guide are not followed, the charging pad may shut down or reduce the
power output and charging speed. Please check that your device is Qi wireless enabled and is
functioning correctly and does not have any form of damage (software of hardware) as this may
activate the overcurrent protection feature.
When charging your device, it (your device) must be Qi charging enabled. Your device will not
charge properly or may not experience fast charging if any of these situations are true; (a) Your
device has more than 60% battery power. (b) iOS version below 11.1.2. (c) Device temperature is
more than 35-45 ° C.
Only this Bitmore product is covered by Bitmore’s 24-month guarantee and covers manufac-
turing defaults only. Charging cables or any accessories included with this device are excluded
from the guarantee.
BMQIP10 EPRO POWER 10W PAD  2

Malicious damage, or any faults arising out of failure to follow the instructions in this manual will
render the warranty void. You MUST register your product through bitmore.co.uk for your
warranty to be valid. Any accessories, cables, plugs or any devices or property being used by or
connected to this product in any way are not covered by the guarantee oered by Bitmore.
Bitmore is exempt from any liability when these instructions are not followed and for any liability
owing to damage, injury or death when using this product.
SAFETY INFORMATION:
DO NOT place any metals or mental objects (including a device case/cover that has metal
components) on your device or this product whilst in use and connected to a power source.
You risk potential electrical shocks, static or other more dangerous incidents such as fire or death
DO NOT leave your device connected to this product when not in use or when
charging is complete
DO NOT cover this product or your device when in use
DO NOT expose this product to heat sources (including fire or direct sunlight)
DO NOT use or expose this product or your device to areas of high humidity, any liquids, gels or
aerosols or heavy dust, keep it dry and clean If this product encounters any liquid, immediately
unplug the product from any connected power sources or devices
DO NOT disassemble or modify this product – this could cause risk of injury, death,
or damage to property
This product must only be used and stored in an ambient environment with a temperature
between 0-45 °C
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
Avoid cleaning this product using liquids or chemical substances (use a dry cloth only)
Only use attachments/accessories supplied by Bitmore or those certified by your
device manufacturer
This product is not a toy, DO NOT leave children unsupervised with this product.
Please use a genuine certified wall adaptor, such as one that is supplied with your
device manufacturer
DO NOT use a wall adaptor with a fast charge or high AMP output
DO NOT leave your device unattended for charging overnight
DO NOT use faulty, damaged or none certified (by your device manufacturer) plugs to charge
or discharge your devices
DO NOT use a plug with more than a 5W output
DO NOT operate this product where aerosols are or have recently been used or where oxygen is
being administered
DO NOT operate in a closed environment such as a pocket, handbag, backpack,
under a pillow etc
BMQIP10 EPRO POWER 10W PAD  3

Get your 24-month Limited Guarantee and become a Bitmore member!
You must register your device via bitmore.co.uk within 30 days of purchase for the manufactur-
ing guarantee to be valid. Plus get a “bit more” by gaining access to exclusive product giveaways,
membership rewards and discounts!
Subject to applicable law, parent company Bitmore Limited (UK) and Nuwave Channel Partners
BV (operating in the EU on behalf of Bitmore Limited) (hereinafter “Bitmore”4), sell its prod-
ucts (hereinafter “Product(s)”) with the intent that they are free of defects in manufacture and
workmanship for 24-months from the date of original purchase, except as noted below. Bitmore
warrants that its Products will be free of defects in material and workmanship under normal use
and service. This guarantee extends only to consumers and does not extend to Retailers. Bitmore
does not authorize anyone, including, but not limited to, retailers, the subsequent consumer
purchaser of the product from a retailer or remote purchasers, to obligate Bitmore in any way
beyond the terms set forth herein. This guarantee does not cover damage caused by misuse or
abuse; accident; the attachment of any unauthorized accessory; alteration to the product;
improper installation; unauthorized repairs or modifications; improper use of electrical/power
supply; loss of power; dropped Product; malfunction or damage of an operating part from failure
to provide manufacturer’s recommended maintenance; transportation damage; theft; neglect;
vandalism; or environmental conditions; loss of use; or any other conditions whatsoever that are
beyond the control of Bitmore.
THE GUARANTEE PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE GUARANTEE.
THERE SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY
IMPLIED GUARANTEE OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION
ON THE PART OF THE COMPANY WITH RESPECT TO PRODUCTS COVERED BY THIS
GUARANTEE. BITMORE SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL, CONSEQUEN-
TIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS GUARANTEE REQUIRE MORE
THAN THE REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE DEFEC-
TIVE WITHIN THE EFFECTIVE PERIOD OF THE GUARANTEE. REFUNDS WILL BE GIVEN IF
REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE, BITMORE
RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF REPAIR OR
REPLACEMENT.
This guarantee does not extend to the purchase of opened, used, repaired, repackaged and/or
resealed products, including but not limited to sale of such products on Internet auction sites
and/or sales of such Products by surplus or bulk resellers. All warranties or guarantees shall
immediately cease and terminate as to any Products or parts thereof which are repaired,
replaced, altered, or modified, without the prior express and written consent of Bitmore.
This Agreement is made for the benefit of the parties and is not intended to benefit any third
party or be enforceable by any third party.
BMQIP10 EPRO POWER 10W PAD  4

The rights of the parties to terminate, rescind, or agree any amendment, waiver, variation, or
settlement under or relating to this Agreement are not subject to the consent of any third party.
This guarantee provides you with specific legal rights. You may have additional rights
This guarantee provides you with specific legal rights. You may have additional rights. which may
vary from country to country. Because of individual regulations, some of the above limitations
and exclusions may not apply to you.
NOTE:
Failure to follow the instructions in this manual will result in the manufacturing guarantee being
void. Please take extra care when connecting cables to your devices or the product to avoid
damaging the ports.
Wear and tear aren’t covered by the guarantee. Submersion in liquids will void the guarantee.
Devices connected to this product or App are not covered by the Bitmore guarantee.
For Bitmore products containing a Lithium-ion battery:
Lithium-ion battery powered devices are dispatched from our factory with a partial charge,
depending on the storing temperature and the length of storage during transit and with the
retailer, the charge held by the device will naturally decrease, for best performance we recom-
mend charging the device fully,
Any product that is powered by a Lithium-ion battery, as with all devices using Lithium, the
amount of charge the lithium cells can hold decreases over time and with use or if left in a cold
environment, experiencing fluctuations in temperature or when unused for long periods of time
(charge and discharged the battery often, even if you are not using it). Therefore, you may find
that the amount of charge this product holds and oers may be slightly less. This is typically a
slow process and a naturally recurring phenomenon and is not covered by the guarantee or
guarantee.
BMQIP10 EPRO POWER 10W PAD  5

Our roots are in creating high quality
products, which has now grown in to
developing an extensive range of
audio, power and tech accessories.
Stemming from our passion for the
environment, we strive to make
Bitmore as eco-friendly as possible.
The combination of innovative
sustainable solutions with our tech
expertise means we create products
that are great for you, and the planet.
@bitmoreuk
www.bitmore.co.uk
[email protected]
A BIT MORE
ABOUT US
IMPORTED AND DISTRIBUTED BY:
BITMORE LTD, PARK HOUSE,
15-19 GREENHILL CRESCENT,
WATFORD, WD18 8PH, UK
BITMORE BV,
KAPELLERLAAN 19,
6041 JB ROERMOND, NL