Bittel 7711-12BLK User manual

_______________________________________________________________________
BITTEL Page 1 of 8 UNOMedia 77 Multi-Media Parts
BITTEL
Multi-Media Parts
of
7711-12BLK
Followed description maybe different from the real device. Please
keep the real device as the criterion. The telephone is subject to
change without notice. In order to fully use this device please
read this manual carefully.
We bring good things to Hospitality.

_______________________________________________________________________
BITTEL Page 2 of 8 UNOMedia 77 Multi-Media Parts
Thank you for purchasing a Bittel product.
MAIN FEATURES
7711-12BLK is a kind of Multi-Media device, which is specially designed to meet
the need of hotel guestroom. 7711-12BLK is made of first class electrical
materials, awarded several patents, which give 7711-12BLK a variety of functions
and magnificent appearance. Further more it also own special multi-media
features, such as Alarm, FM radio, Charging, etc.
Some features as below:
1. Clear and Striking LCD display and the brightness can be adjusted
2. Alarm, FM Radio
3. USB Charging Ports for portable type mobile devices, such as Apple, Samsung,
HTC, etc
4. Daylight Saving Time (DST) auto change
5. Back-up battery - Time and Alarm can also well work without external power
LOCATION AND CONTROL
1 2
A B C 3 D EF
4
G H I 5 JK L 6 M N O
7
P Q R S 8 TU V 9 W X YZ
TO N E 0
O P ER #
H O LD M U TE R ED IA L
SP K R
SN O O ZE
NFC
1 2 3 4 5
6
B R IG H TN ESS A LA R M SE TA LA R M A LA R M +
_

_______________________________________________________________________
BITTEL Page 3 of 8 UNOMedia 77 Multi-Media Parts
TO TEL
DC
RINGER
HI
7
8 9
LINE IN
9 810
11
13
14
12
1.BRIGHTNESS
2.SNOOZE
3.ALARM-
4.ALARM+
5.ALARM SET
6.ALARM ON/OFF
7.DC Jack
8(9). USB Charging Port
10. Infrared Receiving Area
11.Multi-Function Cable connector
12.Charging Line Jack
13.Battery box
14.BL-5C Lithium Battery

_______________________________________________________________________
BITTEL Page 4 of 8 UNOMedia 77 Multi-Media Parts
Install Lithium Battery
1. Firstly please disconnect the power adaptor and open the battery box, which is
on the back side of the device
2. Please correctly install the battery.
3. Put the battery cover back and install the screw. If the battery is successfully
installed, the LCD will be light.
Opeartion about Time and Alarm
Time Setting
Under AUDIO OFF mode (not LINE IN or FM-RADIO working mode) to set the
time
1) Press ALARM SET for 6s，the hour digit will flash, press ALARM- or ALARM+
to adjust hour.
2) Press ALARM SET again while the hour digit is flashing, the minute digit will
flash, press ALARM- or ALARM+ to adjust minute.
3) Press ALARM SET to finish the setting.
4) Press ALARM+ for 5s key to adjust 12 hour format and 24 hour format.
5) Year, Month and Time display
i) Press SNOOZE for a while, LCD will display Month, Day;
ii) Press Snooze for a while again, LCD will display Year;
iii) Press Snooze for a while again, LCD will display DST Zone and easy to
view the setting parameters.
Alarm Setting
1. Set Alarm Time
1) Press ALARM SET key, then press ALARM- or ALARM+ to adjust hour.
2) Press the ALARM SET key again, then press ALARM- or ALARM+ to
adjust minute.
3) Press the ALARM SET key to finish the setting.
2. Activate the Alarm
Press ALARM ON/OFF key to start and close alarm. The alarm time and its
mark will be displayed on the LCD if the alarm is activated. The alarm and its
mark disappear will disappear if the alarm is closed.
3. Alarm snooze feature
1) When alarm ringing, press any function key (except for ALARM button) or
pick up the handset, it will activate the Snooze. After 10 minutes it will ring
again.
2) Alarm ringing during playing mode, it exist playing mode automatically.

_______________________________________________________________________
BITTEL Page 5 of 8 UNOMedia 77 Multi-Media Parts
Adjust LCD brightness
In off-alarm mode, press SNOOZE to adjust the LCD brightness, there are
three levels for selecting: Mid, Hi and Off.
Charging ports
1. There are Four USB charging ports, charging for some devices
1) Two intelligent USB Charging ports — Charging for Apple devices.
2) Two standard USB Charging ports —— Charging for mobile phones and
other peripheral products.
2. Multi-Functional Charging ports: Apple Dock & Lighting Connector charging
for all Apple devices; Micro USB port charging for the mobile phones with
micro USB port.
Clock’s battery Changing
The back-up battery is BL-5C Lithium Battery, 1000mAH and 3.7V. Without
external power, the back-up battery will keep the LCD in middle-light. Further
more, it can make the LCD to show the time and guarantees the Alarm can well
work.
If it needs change new battery, please remove the battery-cabinet cover, take off
the old battery and install new one. Please make sure to install the right
battery.
Note: The Back-up battery isn’t supplied & installed into UM 77 unless there is
special requirement.
Change time
Firstly, please install two pieces of 7# 1.5V batteries into the Remote Time
Controller. Pay attention to the polarity of the battery. Don’t mix the old and new
batteries.
Note: The anode of the battery should be toward outside. The battery should be
changed every two years.

_______________________________________________________________________
BITTEL Page 6 of 8 UNOMedia 77 Multi-Media Parts
Remote Time Control
Set time with the Remote Time Control
●Press TIME SET key, hour digits flashing, press UP/DOWN key to adjust,
●Press TIME SET key, press UP/DOWN key to adjust minute,
●Press TIME SET key, press UP/DOWN key to adjust month,
●Press TIME SET key, press UP/DOWN key to adjust day,
●Press TIME SET key, press UP/DOWN key to adjust year,
●Press TIME SET key, LCD display the time, setting finished.
Set DST area code with the Remote Time Control
Press DST SET key, then press UP/DOWN key to set the area code:
00= DST OFF, 01=USA/Canada, 02=Europe/Russia/Swiss;
03= Mexico, 04=New Zealand
Adjust Time
1) After the above setting, press DST PROG at the right upper direction within
10cm near the LCD to adjust the DST Time. Press Time PROG to adjust the
date and time.
2) When LCD displays time, press TIME SET over 2 seconds to realize the
conversion of 12- Hour Format and 24- Hour Format.
Note: If the attached Remote Time Control is different than above image, please
according to the attached object.
1. LCD Display
2. DST SET key——Set DST time.
3. TIME SET key——Set time and date.
4. TIME PROG key——Adjust time and date .
5. DST PROG key ——Adjust DST time.
6. UP key —— Upward key.
7. DOWN key——Downward key.

_______________________________________________________________________
BITTEL Page 7 of 8 UNOMedia 77 Multi-Media Parts
Maintenance and Troubleshooting
1. Acoustics no sound
Please check if the power is correctly connected.
2. No signal or nersy noise after radio selected the channel
Adjust the direction of the radio antenna
No the selected channel in local
FCC APPROVAL
Complies with Part 68 of the FCC rules. On the bottom of this telephone is a label
that contains, among other information, the FCC registration number and the
ringer equivalence number (REN) for this telephone. If requested, you must
provide this information to the Telephone Company.
CE APPROVAL
Complies with CE approval.
JACKS
Use RJ11C USOC standard modular jacks.
WARRANTY
This product is warranted for a period of 12 months from the date of purchase
against faulty materials or workmanship. If during this period a defect arises, we
may repair or replace the product, at Bittel’s discretion, provided that:
1) The product has not been used for any purpose other than normal use,
2) Unauthorized product repair or modifications have not been attempted.
3) The product has never been used in a harsh or corrosive environment.
4) No damage in transit
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS.
THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM
JURISDICTION TO JURISDICTION.
This warranty is only valid for merchandise purchased directly from Bittel or
dealers or distributors Bittel Co. authorized .

_______________________________________________________________________
BITTEL Page 8 of 8 UNOMedia 77 Multi-Media Parts
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACTING BITTEL
Telephone: [phone]
Internet: www.bittelgroup.com
Email: [email protected]
Address: Shandong Bittel Intelligent Technology Co., Ltd.
No. 1 Rizhao North Road, Rizhao,
Shandong, 276800, China
Copyright © 2015 Bittel Inc. All rights reserved. V2