Bittel Polaris Series User manual

_______________________________________________________________________
_BITTEL Page 1 of 5 POLARIS SERIES
BITTEL
POLARIS SERIES PHONE
USERS MANUAL
Covers Models
HA9888(41)T- 0
Please read this manual before use.
We bring good things to Hotel

_______________________________________________________________________
_BITTEL Page 2 of 5 POLARIS SERIES
Thank you for purchasing a Bittel product.
UNPACKING YOUR PHONE
This package should contain the following:
·Polaris base unit
·Straight line cords
·This manual
BEFORE USING
The Polaris Series is designed for hotel applications and behind a registered PBX
system in hotel. Determine you have the correct modular jack for connecting the
telephone. If you do not have amodular jack, onemay be obtained at minimal
cost at a local hardware store, discount store or home center.
CONVERTING TO WALL MOUNT
Hold telephone in front of the 2 mushroom shaped mounting posts on the wall
jack. Line up both keyholes with the 2 posts. Slide telephone down slightly. When
properly installed the telephone will be firmly attached to the wall
MAIN FEATURES
1. No hook-switch design
2. Busy tone disconnect automatically
3. Volume three-level control.
4. SPKR , Hold , VOL/CALL keys
5. Message Waiting Light
6. Hold current line in waiting mode with LED indicator
7. Wall mounting
LOCATION AND CONTROL
There are two models:
i. 41T-0 (VOL)
1. MWL 2. VOL key 3. Hold Key
4. SPKR 5. MIC 6. Phone jack
7. Wall-mounting Hole

_______________________________________________________________________
_BITTEL Page 3 of 5 POLARIS SERIES
5
4
2
3HOLD
1
VOL
7
6
7
i. 41T-0 (CALL)
Just change VOL to CALL
Sometimes, use word emergency to replace call.
Press this key in emergency mode.
5
4
2
3HOLD
1
7
6
7
8

_______________________________________________________________________
_BITTEL Page 4 of 5 POLARIS SERIES
HOW TO USE
MESSAGE WAITING LIGHT
[MWL] functions as ringing indicator and message indicator.
ADJUSTING VOLUME OF THE PHONE
Press this key to adjust the volume during calling.
EMERGENCY CALLING SYSTEM
Press this key to dial a phone number which has been programmed before. User
must pre-programmed the phone number with special handset. Press this key or
press On/Off key again to close the device.
USING THE [HOLD] KEY
Press [HOLD] key to place the caller on hold (the indicator light)
To release hold, just press SPKR.
The joining extension off-hook also can release the hold (the indicator off)
BUSY TONE DISCONNECT AUTOMATICALLY
If user fails to close the device, it will disconnect automatically within a definite
time. Secure the device works properly.
FCC APPROVAL
The Polaris telephone Series complies with Part 68 of the FCC rules. On the
bottom of this telephone is a label that contains, among other information, the
FCC registration number and the ringer equivalence number (REN) for this
telephone. If requested, you must provide this information to the Telephone
Company.
CE APPROVAL
The Polaris telephone series complies with CE approval.
Warranty
This product is warranted for a period of 12 months from the date of purchase
against faulty materials or workmanship. If during this period a defect arises, we
may repair or replace the product, at Bittel’s discretion, provided that:
1) The product has not been used for any purpose other than normal use,

_______________________________________________________________________
_BITTEL Page 5 of 5 POLARIS SERIES
2) Unauthorized product repair or modifications have not been attempted.
3) The product has never been used in a harsh or corrosive environment.
4) No damage in transit
THIS LIMITED WARRANTY GIVES THE BUYER SPECIFIC LEGAL RIGHTS.
THE BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARYFROM
JURISDICTION TO JURISDICTION.
This warranty is only valid for merchandise purchased directly from Bittel or
dealers or distributors Bittel Co. authorized .
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACTING BITTEL
Telephone: [phone]
Internet: www.bittelcom.com
Email: [e-mail]
Address: Shandong Bittel Electronics Co. Ltd.
No. 1 Rizhao North Road, Rizhao,
Shandong, 276800, China
Copyright © 2011Bittel Inc. All rights reserved.