BIXOLON SRP-350plusIII SRP-352plusIII User manual

User’s Manual
SRP-350plusIII/352plusIII
THERMAL RECEIPT PRINTER
Ver. 2.00
www.bixolon.com

SRP-350plusIII/352plusIII
Ver. 2.00
- 2 -
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the
manual and any property of the product without the prior written approval of
BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON
product.
BIXOLON is not responsible for any direct or indirect damages, arising from or
related to use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
•All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and
quality of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Electronics, such as printers, are prone to damage by static electricity. Therefore, to
protect the printer from static electricity, be sure to turn off the printer before
connecting or disconnecting the cable to the rear of the printer. If the printer is
damaged by static electricity, contact your local dealer.
This equipment is not suitable for use in locations where children are likely to be
present.
When the printer is operating with the media cover open, do not wear anything that
can touch the drive, such as clothing, necklaces, rings, watches, or employee
certificates close to it. Also, keep yourself away from the printer as it is dangerous for
some parts of the body to come into contact with it. If an object or part of your body
touches the drive, immediately disconnect the power cord or turn off the power
switch on the back of the product.

SRP-350plusIII/352plusIII
Ver. 2.00
- 3 -
Warning
Hazardous moving parts
Keep fingers and other body parts away
Pull the print head lever can be stop all moving parts.
IEC 60417-6057 (2011-05) for other moving parts.
Mise en garde
Les appareils électroniques, tels que les imprimantes, risquent d'être endommagés
par l'électricité statique. Par conséquent, pour protéger l’imprimante de l’électricité
statique,
veillez à l’éteindre avant de connecter ou de déconnecter le câble situé à l’arrière de
celle-ci. Si l'imprimante est endommagée par l'électricité statique, contactez votre
revendeur local
Cet appareil n’est pas adapté d’utilser dans des endroits où des enfants sont
probablement d'être présents.
Lorsque l'imprimante fonctionne avec le capot ouvert, ne portez rien qui puisse
entrer en contact avec le mécanisme, tel que des vêtements, des colliers, des bagues,
des montres ou des certificats d'employé à proximité. Éloignez-vous également de
l’imprimante car il est dangereux que certaines parties du corps entrent en contact
avec celle-ci. Si un objet ou une partie de votre corps entre en contact avec le
mécanisme, débranchez immédiatement le câble d'alimentation ou éteignez
l’interrupteur situé à l'arrière du produit.
Attention
Pièces mobiles dangereuses
Veillez à ce que vos doigts ou toute partie du corps n’entre(nt) pas en contact avec ces
pièces. Tirez le levier de la tête d'impression pour arrêter toutes les pièces en
movement.
IEC 60417-6057 (2011-05) pour les autres pièces mobiles.

SRP-350plusIII/352plusIII
Ver. 2.00
- 4 -
Compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of
at least 20 cm must be maintained between the antenna of this device and all
persons.
Caution: Any Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Class A Digital Device: Wired Device
This Apparatus complies with class “A” limits for radio interference as specified in the
Canadian department of communications radio interference regulations.
This Class A digital apparatus complies with Canadian ICES-003.
Appareil numérique de classe A: appareil filaire
Get appareil est conforme aux normes class “A” d’interference radio tel que specifier
par ministre canadien des communications dans les reglements d’interference radio.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.

SRP-350plusIII/352plusIII
Ver. 2.00
- 5 -
Waste Electrical and Electric Equipment (WEEE)
This marking shown on the product or its literature, indicates that is should
not be disposed with other household wastes at the end of its working life,
to prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.

SRP-350plusIII/352plusIII
Ver. 2.00
- 6 -
WARNING & CAUTION
Is described as death, physical injuries, serious financial losses, and
damage to data etc. that can be caused to the user.
Do not allow the product to be
damaged by heavy objects.
Noncompliance may cause electric
shock or fire.
Keep excessive liquids away from the
power cord and outlet. If matter is
smeared onto the power cords, wipe with
a dry cloth.
Noncompliance may cause electric shock
or fire.
Keep small accessories or other packaging
materials away from young children.
Beware: choking hazard. Mishandling the
product may incur injuries which may
require seeking urgent medical attention.
Do not excessively bend or strain the power cord.
Securely push the power cord all the way into the
power outlet lest it remain loose. Make sure to
hold the cord tight when separating it from the
power outlet. Do not remove the power cord
while the product is in use. Noncompliance may
cause electric shock or fire.
Only use authentic products from
BIXOLON. The company will not provide
post-sale support for damaged or other
quality issues that any fake
(or refurbished) products may incur.
Do not connect multiple products to a
single or faulty power outlet. Use only
grounded power outlets that meet the
industry standard. Noncompliance may
cause electric shock or fire.

SRP-350plusIII/352plusIII
Ver. 2.00
- 7 -
If there is a problem with the
product, please contact the original
place of purchase or through
BIXOLON website’s product repair
page (http://www.bixolon.com).
Do not let any foreign substances
enter the product. Do not place heavy
objects, liquids, or metals on the
product. This could cause damage to
the product or a fire.
Never independently disassemble,
repair, or modify the product as the
warranty will become invalid.
When repair is necessary, contact the
original place of purchase.
Install the product in a fixed place
preventing it from tipping over. When
moving the product, turn off the power and
disconnect all connected cables, including
the power cord. It may damage the
product.
Install the product in a well-ventilated area by keeping it
a certain distance from the wall. The product installed in
certain places such as where a lot of fine dust is generated,
where the temperature is too high or too low, where there is
a lot of moisture or water, and at airports or stations that are
used continuously for a long time may suffer serious quality
problems due to the influence of the surrounding
environment. An increase in internal temperature
may start a fire. Be sure to contact the place of purchase
before installing the product.
If the product emits a strange sound, burning
smell, or smoke, turn off the power immediately
and unplug the power cord. If the product is
dropped or its exterior is damaged, turn off the
power immediately and unplug the power cord.
Do not subject the product to shock. It may start
a fire. It may damage the product.

SRP-350plusIII/352plusIII
Ver. 2.00
- 8 -
Manual Introduction
This manual provides basic information on printers and provides ways to install, use,
and check them. In order to protect the safety of users and prevent property damage,
be fully familiar with this manual before using the product. Please use it.
Manual Symbol Introduction
Precaution &
Warning
It describes death, physical injuries, serious financial losses,
and damage to data etc. that can be caused to the user.
Note
It provides additional information on the function and
performance of the product.
Product Symbol Introduction
DC (Direct current)
Error, Warning
Paper Feeding
Stand-By
USB
Ethernet

SRP-350plusIII/352plusIII
Ver. 2.00
- 9 -
Printer Introduction
Complimented with a range of connectivity options, the SRP-350plusIII is an industry
leading multi-functional 3-inch (80mm) thermal Printer. Featuring powerful printing
performance of up to 300mm/second at 300dpi and a 16 shade grey scale for quality
text, graphics and barcodes. Featuring a cost-saving paper reduction function
(barcode reduction included), anti-jam guide and adjustable paper guide for 2-inch or
3-inch printing media. This user-friendly printer is comes with USB V2.0 FS + Ethernet
as standard and optional USB V2-0 FS + Ethernet + Serial, Parallel, Powered USB or
Bluetooth V4.2 + LE. Its Bluetooth model provides compatibility with all major
operating systems including iOS™(MFi certified), Android™& Windows™and is
supplemented.
The main features of the printer are as follows
1. Print at a max. speed of 300mm/s (180 dpi)
2. Low noise thermal printing
3. Support of USB & Ethernet (built-in type), serial, parallel, POWERED USB, Wireless
LAN, and Bluetooth interfaces
4. Built-in data buffer (data can be received and buffered while printing)
5. Control of external devices like cash registers through peripheral device drive
circuit
6. Barcode printing
7. Support of various print density settings (by changing DIP switch settings)

SRP-350plusIII/352plusIII
Ver. 2.00
- 10 -
Table of Contents
Copyright.......................................................................................................................................2
WARNING & CAUTION .................................................................................................................. 6
Manual Introduction .....................................................................................................................8
Printer Introduction ......................................................................................................................9
1. Content Confirmation ............................................................................................................. 11
2. Product Part Names ................................................................................................................ 12
2-1 Printer Part Names .................................................................................................................12
2-2 Interface Part Names .............................................................................................................13
2-2-1 USB (Built-in).....................................................................................................................13
2-2-2 Ethernet (Built-in).............................................................................................................14
2-2-3 Single Serial Interface Card (RS-232C) ...........................................................................15
2-2-4 Parallel Interface Card (IEEE1284) ..................................................................................16
2-2-5 Wireless LAN Interface Card ...........................................................................................17
2-2-6 Bluetooth Interface Card.................................................................................................18
2-2-7 Powered USB Interface Card...........................................................................................19
2-2-8 Drawer Kick-out Port........................................................................................................20
3. Installation & Usage ................................................................................................................ 21
3-1 Printer Installation Placings...................................................................................................21
3-2 Power Connection...................................................................................................................22
3-3 Inserting and changing the paper roll..................................................................................24
3-4 Using Controller......................................................................................................................27
3-5 Mounting Partition (Option)..................................................................................................28
4. Printer Setting Change............................................................................................................ 29
4-1 Serial Interface........................................................................................................................29
4-2 Parallel / USB / Ethernet / Wireless LAN / Powered USB Interface ...................................30
4-3 Bluetooth Interface.................................................................................................................31
4-4 Order of Change Settings ......................................................................................................32
5. Self-Test ................................................................................................................................... 33
6. Hexadecimal Dumping............................................................................................................ 34
7. Maintenance............................................................................................................................ 35
7-1 Paper Jam.................................................................................................................................35
7-2 Cleaning Printer ......................................................................................................................36
8. Specifications........................................................................................................................... 37
8-1 Printer Specifications..............................................................................................................37
8-2 Recommended Papers ...........................................................................................................38

SRP-350plusIII/352plusIII
Ver. 2.00
- 11 -
1. Content Confirmation
•If there is any part missing, please contact the place of purchase.
•The actual part may look different from the image.
SRP-350plusIII/352plusIII
AC/DC Adapter
Power Cord
Installation Guide
Roll Paper
Cable Cover

SRP-350plusIII/352plusIII
Ver. 2.00
- 12 -
2. Product Part Names
2-1 Printer Part Names
Feed Button
Power Switch
Cover Open Button
Manual Cutter
Cutter Cover
Printer Cover

SRP-350plusIII/352plusIII
Ver. 2.00
- 13 -
2-2 Interface Part Names
• Connect the printer to the host computer using the right interface cable that
complies with the specifications of the interface.
2-2-1 USB (Built-in)
No.
Signal Name
Designation (Color)
Function
Shell
Shield
Drain Cable
Frame Ground
1
VBUS
RED
Host Power
2
D-
WHITE
Data Line (D-)
3
D+
GREEN
Data Line (D+)
4
GND
BLACK
Signal Ground
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
USB Port

SRP-350plusIII/352plusIII
Ver. 2.00
- 14 -
2-2-2 Ethernet (Built-in)
Pint No.
Signal Name
Color
Function
1
TD+
WHITE ORANGE
Transmit +
2
TD-
ORANGE
Transmit -
3
TCT
WHITE GREEN
Receive +
4
NC
BLUE
-
5
NC
WHITE BLUE
-
6
RCT
GREEN
Receive -
7
RD+
WHITE BROWN
-
8
RD-
BROWN
-
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
- IP and MAC information can be obtained from the self-test.
- Refer to the Wireless LAN Connection Manual for more detailed
instructions about how to establish the connection.
The network connection manual is on the BIXOLON website
(www.bixolon.com) We're offering it.

SRP-350plusIII/352plusIII
Ver. 2.00
- 15 -
2-2-3 Single Serial Interface Card (RS-232C)
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
Serial Port

SRP-350plusIII/352plusIII
Ver. 2.00
- 16 -
2-2-4 Parallel Interface Card (IEEE1284)
Pin No.
Source
Compatibility Mode
Nibble Mode
1
Host
nStrobe
HostClk
2
Host/Printer
Data 0 (LSB)
-
3
Host/Printer
Data 1
-
4
Host/Printer
Data 2
-
5
Host/Printer
Data 3
-
6
Host/Printer
Data 4
-
7
Host/Printer
Data 5
-
8
Host/Printer
Data 6
-
9
Host/Printer
Data 7 (MSB)
-
10
Printer
Nack
PtrClk
11
Printer
Busy
PtrBusy /Data3,7
12
Printer
Perror
AckDataReq/Data2,6
13
Printer
Select
Xflag/Data1,5
14
Host
nAutoFd
HostBusy
15
-
NC
NC
16
-
GND
GND
17
-
FG
FG
18
Printer
Logic-H
Logic-H
19~30
-
GND
GND
31
Host
nInit
nInit
32
Printer
nFault
nDataAvail/Data0,4
33
-
GND
ND
34
Printer
DK_Status
ND
35
Printer
+5V
ND
36
Host
nSelectIn
1284-Active
Connect or disconnect the communication cable while the printer
power is off. If power is on, your data may be lost.
Parallel Port

SRP-350plusIII/352plusIII
Ver. 2.00
- 17 -
2-2-5 Wireless LAN Interface Card
1) Wireless LAN Communication Specifications
Item
Specifications
Frequency
2.4GHz / 5GHz
Protocol
802.11 a/b/g/n
2) Connecting Wireless LAN
Printer can be connected to terminal devices with wireless LAN communication
capability (PDA, PC, smartphone, tablet PC, etc.).
Refer to the Wireless LAN Connection Manual for more
detailed instructions about how to establish the connection.
The network connection manual is on the BIXOLON website
(www.bixolon.com) We're offering it.

SRP-350plusIII/352plusIII
Ver. 2.00
- 18 -
2-2-6 Bluetooth Interface Card
1) Bluetooth Communication Specifications
Item
Specifications
Frequency
2.402 ~ 2.480 GHz
Version
5.2
2) Bluetooth Connection
Printer can be connected to terminal devices with Bluetooth communication
capability (PDA, PC, smartphone, tablet PC, etc.)
Refer to the Bluetooth Connection Manual for more
detailed instructions about how to establish the connection.
The Bluetooth connection manual is on the BIXOLON website
(www.bixolon.com) We're offering it.

SRP-350plusIII/352plusIII
Ver. 2.00
- 19 -
2-2-7 Powered USB Interface Card
Pin No.
Signal Name
Function
Shield
Shield
Prevent Noise
1
PGND
Main Power Ground
2
VPP24V
Main Power
3
GND
Signal ground
4
D+
Data Line (D+)
5
D-
Data Line (D-)
6
VBUS
Host Power
7
VPP24V
Main Power
8
PGND
Main Power Ground
- Refer to www.powered.org for detailed information related to the
specifications of cable and port.
- Do not apply AC/DC Adapter 24V when using powered USB.
(Powered USB uses its own power.)
- In case of using Powered USB interface, the other USB interface
provided by default is not useful. (In this case, USB communication is
only available through the Powered USB)

SRP-350plusIII/352plusIII
Ver. 2.00
- 20 -
2-2-8 Drawer Kick-out Port
Connect the Drawer Kick-out connection cable to the drawer kick-out port on the rear
side of the printer.
Pin No.
Signal Name
Direction
1
Frame Ground
-
2
Drawer Kick-out Drive Signal 1
Output
3
Drawer Open/Close Signal
Input
4
+24V
-
5
Drawer Kick-out Drive Signal 2
Output
6
Signal Ground
-
- Use a cash drawer that meets the printer specifications.
Using a cash drawer that is inappropriate to the specs or using
it as a power supply for a separate device may result in damage to
the product.
- Do not connect a telephone line to the drawer kick-out port.
Otherwise, the telephone line and the computer may be damaged.
- Do not allow a foreign object such as a conductor to touch the
drawer kick-out port. This may result in damage to the product.
- Make sure to use a cash drawer with an internal coil resistance of
24 Ωor higher. (The maximum current is 1A.)
- The open signal time for the cash drawer should not exceed 0.8
seconds. After opening the cash drawer, make sure to idle for at
least 3.2 seconds (at least 4 times that of the open signal time)
before operating it.