BIXOLON XM7-30 User manual

User’s Manual
XM7-30 Series
MOBILE PRINTER
Ver. 1.00
http://www.bixolon.com

Ver. 1.00
- 2 -
XM7-30 Series
Table of Contents
Copyright............................................................................................................................. 4
WARNING & CAUTION ....................................................................................................... 7
Manual Introduction........................................................................................................ 10
Product Introduction....................................................................................................... 11
1. Preparation ................................................................................................................... 12
1-1 Components ....................................................................................................................12
1-2 Front Part Names ............................................................................................................13
1-3 Rear Part Names .............................................................................................................13
1-4 LCD Menu Names............................................................................................................14
1-4-1 Top icon ...............................................................................................................14
1-4-2 Main menu icon ..................................................................................................15
2. Installation & Connection ........................................................................................... 17
2-1 Battery Installation..........................................................................................................17
2-2 Battery Charging .............................................................................................................18
2-2-1 Using AC/DC Adapter .........................................................................................18
2-2-2 Using Single Battery Charger (Optional) .........................................................19
2-2-3 Using Quad Battery Charger (Optional) ..........................................................20
2-3 Media Installation............................................................................................................22
2-4 Bluetooth & Wireless LAN Connection .........................................................................24
2-5 Interface Cable Connection............................................................................................25
2-6 Fixed Interface Cable Connection .................................................................................26
3. Use.................................................................................................................................. 27
3-1 Using Peeler.....................................................................................................................27
3-2 Using Belt Strap...............................................................................................................28
3-3 Using Shoulder Strap (Optional) ...................................................................................29
3-4 Using Fan-Fold Media .....................................................................................................30
3-4-1 Media Width 3-inch.............................................................................................30
3-4-2 Media Width 3-inch FAN FOLD ..........................................................................30
3-4-3 Media Width 28~76 mm (1.10~2.99 inch) .........................................................30
3-4-4 Separate the Fan-Fold Cap ................................................................................31
3-5 Using Control Button ......................................................................................................32
3-5-1 Power Button ......................................................................................................32
3-5-2 Media Feed Button .............................................................................................32
3-5-3 Menu Move Button.............................................................................................32
3-5-4 Menu Select Button ............................................................................................32

Ver. 1.00
- 3 -
XM7-30 Series
4. Self-Test ......................................................................................................................... 33
4-1 Self-Test Instructions ......................................................................................................33
4-2 Self-Test Sample ..............................................................................................................34
5. Cleaning......................................................................................................................... 36
6. Appendix........................................................................................................................ 37
6-1 Printer Specifications ......................................................................................................37

Ver. 1.00
- 4 -
XM7-30 Series
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual
and any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or
related to use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
•All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON maintains ongoing efforts to enhance and upgrade the functions and quality
of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Electronics, such as printers, are prone to damage by static electricity. Therefore, to
protect the printer from static electricity, be sure to turn off the printer before connecting
or disconnecting the cable to the rear of the printer. If the printer is damaged by static
electricity, contact your local dealer.

Ver. 1.00
- 5 -
XM7-30 Series
Compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
Caution: Any Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Class A Digital Device: Wired Device
This Apparatus complies with class “A” limits for radio interference as specified in the
Canadian department of communications radio interference regulations.
This Class A digital apparatus complies with Canadian ICES-003.
Informations de conformité
Appareil numérique de classe A: appareil filaire
Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par
ministre canadien des communications dans les reglements d’interference radio.
Cet appareil numérique de la classe A est conform à la norme NMB-003 du Canada.

Ver. 1.00
- 6 -
XM7-30 Series
Waste Electrical and Electric Equipment (WEEE)
This marking shown on the product or its literature, indicates that is should not
be disposed with other household wastes at the end of its working life, To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check
the terms and conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.

Ver. 1.00
- 7 -
XM7-30 Series
WARNING & CAUTION
It describes death, physical injuries, serious financial losses, and damage
to data etc. that can be caused to the user.
Do not connect multiple products to a
single or faulty power outlet.
Use only grounded power outlets that
meet the industry standard.
Noncompliance may cause electric
shock or fire.
Only use authentic products from
BIXOLON. The company will not
provide post-sale support for
damaged or other quality issues that
any fake (or refurbished) products
may incur.
Do not excessively bend or strain the power
cord. Securely push the power cord all the way
into the power outlet lest it remain loose. Make
sure to hold the cord tight when separating it
from the power outlet. Do not remove the
power cord while the product is in use.
Noncompliance may cause electric shock or
fire.
Keep small accessories or other packaging
materials away from young children. Beware:
choking hazard.
Mishandling the product may incur injuries
which may require seeking urgent medical
attention.
Keep excessive liquids away from the
power cord and outlet. If matter is
smeared onto the power cords, wipe
with a dry cloth. Noncompliance may
cause electric shock or fire.
Do not allow the product to be damaged
by heavy objects.
Noncompliance may cause electric
shock or fire.

Ver. 1.00
- 8 -
XM7-30 Series
If the product emits a strange sound, burning
smell, or smoke, turn off the power immediately
and unplug the power cord. If the product is
dropped or its exterior is damaged, turn off the
power immediately and unplug the power cord.
Do not subject the product to shock. It may start
a fire. It may damage the product.
Install the product in a well-ventilated area by keeping it a
certain distance from the wall. The product installed in certain
places such as where a lot of fine dust is generated, where the
temperature is too high or too low, where there is a lot of
moisture or water, and at airports or stations that are used
continuously for a long time may suffer serious quality
problems due to the influence of the surrounding
environment. An increase in internal temperature
may start a fire. Be sure to contact the place of purchase
before installing the product.
Install the product in a fixed place
preventing it from tipping over. When
moving the product, turn off the power
and disconnect all connected cables,
including the power cord. It may
damage the product.
Never independently disassemble,
repair, or modify the product as the
warranty will become invalid.
When repair is necessary, contact the
original place of purchase.
Do not let any foreign substances
enter the product. Do not place heavy
objects, liquids, or metals on the
product. This could cause damage to
the product or a fire.
If there is a problem with the
product, please contact the original
place of purchase or through
BIXOLON website’s product repair
page (http://www.bixolon.com).

Ver. 1.00
- 9 -
XM7-30 Series
WARNING & CAUTION
It's to use the battery properly and prevent danger or physical damage,
so please keep it.
Do not subject the battery to strong impact or throw it.
Do not disassemble or modify the battery.
Do not allow battery leakage to come into contact with
your eyes or skin. Keep the battery out of the reach of
children and make sure that children do not swallow it.
Otherwise, it can cause the deterioration of battery
performance and lifespan, overheating, rupture, or
ignition. If it comes in contact with skin or is
swallowed, consult a doctor immediately.
If the battery is not to be used for a long time, disconnect it from
the device being used and keep it in a dry place. Even if it is not
used for a long time, charge it at least once every 6 months
while in storage. Do not place the battery in places exposed to high
temperatures (direct sunlight, inside a car, etc.) or where static
electricity is generated (near home appliances, etc.), or near heat
generating devices (heating device, etc.). Do not put the battery in a
fire, microwave, or high pressure (pressure cooker, etc.).
Make sure that the product does not come in contact with metals
(coins, necklaces, etc.) or liquids (water, salt water, etc.).
Stop using the battery if it develops an odor or any other
abnormalities such as heat, discoloration, deformation, or leakage
while using, storing, or charging the battery.
Do not be confused about the (+) and (-) terminals
of the battery. Do not let metal contact the (+) and
(-) terminals of the battery. If the (+) and (-)
terminals of the battery are smeared with
extraneous matter, wipe them clean with a piece of
dry cloth. Otherwise, it can cause deterioration of
battery performance and lifespan, overheating,
rupture, or ignition.
The battery should only be charged using the adapter
or charger provided by Bixolon, and if charging fails
after the specified charging time (6 hours), stop
charging. Do not charge the product longer than the
charging time specified in this manual. Otherwise, it
can cause deterioration of battery performance
and lifespan, overheating, rupture, or ignition.
Store and use the battery within the proper
operating temperature range.
- Charging: 0 - 40℃(32 - 104℉)
- In use: -15 - 50℃(5 - 122℉)
- Long-term storage (more than 30 days): 15 - 40℃(5 - 104℉)
Otherwise, it can cause deterioration of battery
performance and lifespan, overheating, rupture,
or ignition.
Be sure to turn off the power of the device the battery
serves after use. When disposing of the battery,
completely discharge the battery and insulate the
terminals with tape, etc.
Dispose of it in a designated place according to
the relevant laws and regulations of the country.

Ver. 1.00
- 10 -
XM7-30 Series
Manual Introduction
The manual provides basic information on the printer and describes how to install, use,
and inspect it. To ensure your safety and prevent damage to your property, make sure
you read the manual thoroughly before using the machine.
Manual Symbol Introduction
Precaution
& Warning
It describes death, physical injuries, serious financial losses,
and damage to data etc. that can be caused to the user.
Note
It provides additional information on the function and
performance of the product.

Ver. 1.00
- 11 -
XM7-30 Series
Product Introduction
The XM7-30 is a 3-inch thermal mobile label printer which simultaneously connects with
Bluetooth and WLAN. Ideal for smart mobility labelling due to its compact, lightweight
design with an easy-to-open peeler and LCD.
The main features of the printer are as follows
1. 3-inch Mobile Label Printer
2. Printing speed: Maximum 127 mm/s (5ips)
3. Compact and light design: 119 x 180 x 79 mm (4.69 × 7.09 × 3.12 inch) (W x D x H)
4. Peeler
5. Media holder: media width 50 ~ 80 mm
6. Wireless connectivity: Bluetooth V5.2(MFi certified), Wireless LAN 802.11 a/b/g/n
Product Symbol Introduction
AC (Alternation Current)
DC (Direct Current)
USB
NFC

Ver. 1.00
- 12 -
XM7-30 Series
1. Preparation
1-1 Components
• If any items are missing, contact the place of purchase.
• The image may differ from the actual product.
※Basic items
XM7-30
Smart Battery
AC/DC Adapter
Power Cord
Belt Strap
Printer
Installation Guide
Media Disks
(for 12 mm (0.47 inch)
inner diameter)
※Optional items
Battery
Shoulder Strap
Vehicle Adapter
Single Battery
Charger
Quad Battery
Charger
Serial
Interface Cable
(for Serial/USB 14pin port)
USB
Interface Cable
(for Serial/USB 14pin port)
Fixed Serial
Interface Cable
(for Serial/USB 14pin port)
Fixed USB
Interface Cable
(for Serial/USB 14pin port)

Ver. 1.00
- 13 -
XM7-30 Series
1-2 Front Part Names
1-3 Rear Part Names
Media Cover
Power Button
LCD
Media Feed
Button
Peeler
Menu Move Button
Menu Select Button
Outer Terminal Cover
Cover Open Button
Charge
Indication LED
Shoulder Strap Ring
Power Port
Battery
Hole for mounting belt strap
Cable Port
Interface Cap

Ver. 1.00
- 14 -
XM7-30 Series
1-4 LCD Menu Names
• You can check printer status and setting information through LCD.
1-4-1 Top icon
Icon
Description
Bluetooth is enabled but not connected to the host device
Bluetooth is enabled and connected to the host device
Display signal strength of wireless LAN
Can not searching the registered AP
Authentication failed
LAN is enabled and connected
Receiving data, printing or media feed
Media empty
Media cover open
TPH overheating
Battery status

Ver. 1.00
- 15 -
XM7-30 Series
1-4-2 Main menu icon
Icon
Description
Check / set the status of whole printer
1) Interface
2) Media
3) Sensor
4) Powersave
5) Language
Media settings
1) Density
2) Position
- Tear off
- Print
- Direction
Tools
1) Hex dump
2) Print printer config → Self test
3) Print test pattern
4) Printer factory reset
Check / set the status of the interface
1) Bluetooth
- On/Off
- SSP (Secure Simple Pairing) / PIN code mode setting
- BLE / Classic mode setting
- Information (Name, MAC address)
2) Wireless LAN
- On/Off
- Information (SSID, Mode, Encryprtion, IP, Port, MAC address,
Inactivity time)
- Smart connection
(easy connection to AP by linking with smart connection APP)
- Factory reset
3) LAN
- On/Off
- Information (IP, Port, MAC address, Inactivity time)
Check the battery status

Ver. 1.00
- 16 -
XM7-30 Series
Check printer information
1) Version
- Printer, WLAN, Bluetooth
2) Bluetooth
3) WLAN
4) LAN
5) Battery
6) Repair
Sensor settings
1) Media type
- Auto detection / Rear black mark / Front black mark / Gap
- Continueous
2) Peeler
- On/Off
- Sensor sensitivity adjustment
3) RFID
- Setting (Transponder position, Power, Number of retry, Number of
label)
- Calibration
- Information (Band, Valid count, Void count)
Set Backlight, Sleep and Power off Time
1) Backlight brightness
2) Backlight off time
3) Sleep time
4) Power off time

Ver. 1.00
- 17 -
XM7-30 Series
2. Installation & Connection
2-1 Battery Installation
1) Insert the battery in the bottom of the
printer, and ensure that you align the
battery hook properly.
2) Push the battery into the slot until you
hear it snap in place.
Since the battery is partially changed at the time of purchase, charge the
battery prior to product use.
Use the AC/DC adapter or the optional Single/Quad battery charger.
• Be sure to turn off the printer before connecting the power cord
to the printer. This can cause serious electrical damage and bodily
injury.
• Do not operate the printer and power supply in a humid
environment. This can cause serious electrical damage and
bodily injury.

Ver. 1.00
- 18 -
XM7-30 Series
2-2 Battery Charging
2-2-1 Using AC/DC Adapter
1) Turn off the printer power.
2) Connect the power cord ② to the
AC/DC adapter ① and then connect AC
power.
3) Open the external interface cap in the
direction of ③.
4) Connect the AC/DC adapter to the
power port.
LED
Charge Status
Charge Time
Red LED On
Charging
Within 3 hours
Green LED On
Fully Charged
Red LED Blinking
Error Replace
or Reinstall Battery
• Charge the battery only after disconnecting the power to your
device.
• Use only genuine products supplied by Bixolon.
Otherwise, the product may malfunction or there is a risk of
personal injury.
①②
③

Ver. 1.00
- 19 -
XM7-30 Series
2-2-2 Using Single Battery Charger (Optional)
1) Connect the power cord ②to the
battery charger ①.
2) Connect the battery charger ①to the
power port of the cradle ③.
3) Plug the power cord ②into an AC
power.
4) Insert the battery ④into the cradle ③
a snapping sound is heard.
You must use the battery charger provided by BIXOLON to use the singles
battery charger. (AC/DC adapter is not available)
• Charge the battery only after disconnecting the power to your
device.
• Use only genuine products supplied by Bixolon.
Otherwise, the product may malfunction or there is a risk of
personal injury.
①②
③
④

Ver. 1.00
- 20 -
XM7-30 Series
2-2-3 Using Quad Battery Charger (Optional)
2-2-3-1 Connecting the cables
1) Connect the power cord to the Adapter,
and connect the Adapter to the power
port of the quad battery charger.
2) Plug the power cord into a AC power.
Input power is 100 ~ 240 VAC, 50/60 Hz,
1.0 A.
3) When the power is supplied, the
yellow, green and red LEDs are on for
three seconds and do the self-test.
Use only designated AC/DC Adapter. (12 VDC, 3 A)