BIXOLON Srp-275III Mounting instructions

Virtual Memory Switch Manager Manual
Impact / Inkjet Printer
Rev. 2.09
SRP-275II
SRP-275III
SRP-500
http://www.bixolon.com

Impact / Inkjet Printer
Rev. 2.09
- 2 -
■Table of Contents
1. Manual Information........................................................................................................3
2. Usage Environment.......................................................................................................3
2-1 Operating System.......................................................................................................3
2-2 Interface......................................................................................................................3
3. Ready to VMSM..............................................................................................................3
4. Usage of VMSM..............................................................................................................4
4-1 Printer Communication Setting...................................................................................4
4-2 Getting the Memory Switch Status of the Printer ........................................................6
4-3 Setting the memory switch status of the Printer..........................................................8
4-3-1 Setting “Switch 1” .................................................................................................8
4-3-2 Setting “Switch 2” .................................................................................................9
4-3-3 Setting “Switch 5” ...............................................................................................11
4-4 Setting the Serial (RS-232) Communication.............................................................12
4-5 Other Function..........................................................................................................13
4-6 SRP-500 Vertical Alignment......................................................................................14

Impact / Inkjet Printer
Rev. 2.09
- 3 -
1. Manual Information
The purpose of this manual is to provide information on the operation and usage
instructions of the Virtual Memory Switch Manager Utility for the Impact or the Inkjet
Printers of the BIXOLON.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.
2. Usage Environment
2-1 Operating System
Following operating systems are supported for usage.
- Microsoft Windows XP (32bit/64bit)
- Microsoft Windows Server 2003 (32bit/64bit)
- Microsoft Windows Vista (32bit/64bit)
- Microsoft Windows Server 2008 (32bit/64bit)
- Microsoft Windows Server 2008R2 (64bit)
- Microsoft Windows 7 (32bit/64bit)
- Microsoft Windows 8 (32bit/64bit)
2-2 Interface
Use of this Utility is supported on the following Interface.
Serial (RS-232)
Parallel
USB
Ethernet
3. Ready to VMSM
VMSM is included in the enclosed CD, and Latest file versions can be downloaded from
the BIXOLON website.
(www.bixolon.com)

Impact / Inkjet Printer
Rev. 2.09
- 4 -
4. Usage of VMSM
4-1 Printer Communication Setting
To use the VMSM (Virtual Memory Switch Manager), It is necessary to set status of
communication between Printer and PC.
1) Run the “SRP_275II_275III _500VMSM(V3.0.x).exe” file.
2) After double-clicking “SRP_275II_275III_500 VMSM (Ver3.0.x).exe”, you will see this
dialog.
3) Select the Interface Type.
- SERIAL
- PARALLEL
- USB
- ETHERNET
In the Serial Interface, match the communication setting (COM Port Number and Baud
Rate) to those of the Printer.

Impact / Inkjet Printer
Rev. 2.09
- 5 -
4) Click “Connect” button to check communication status.
If communication status is okay, you will see this message box.
* If you don’t see this dialog, please turn off printer and program.
Check cable or interface type then turn on printer and program.
5) “Self Test1”, “Self Test2”, and “Run Manager” buttons are active.
[Self Test 1]: Print self test first page
[Self Test 2]: Print self test second page
[Run Manager]: Run VMSM

Impact / Inkjet Printer
Rev. 2.09
- 6 -
4-2 Getting the Memory Switch Status of the Printer
1) If the Communication Setting is OK, click the “Run Manager” button.
2) Click the “Get Status” button. It gets the status of Printer Setting.

Impact / Inkjet Printer
Rev. 2.09
- 7 -
3) If it is successful, you will see this message box.
4) You can see the status of each memory switch.
* Status Information varies with the Printer Model SRP-275II, SRP-275III and SRP-500.
SRP-500 Printer Model is activated “Switch 1 Status” and “Switch 5 Status” button.

Impact / Inkjet Printer
Rev. 2.09
- 8 -
4-3 Setting the memory switch status of the Printer
After getting the memory switch status of the Printer, the status of the Printer can be
modified.
1) “Get Status”
Pressing this button displays the current memory switch settings read from the printer.
2) “Set Status”
Pressing this button allows the user to designate switch settings of the printer.
4-3-1 Setting “Switch 1”
1) Click the “Switch 1 Status” button.
2) Select the code page in the red box to change the “Default Code Page”.

Impact / Inkjet Printer
Rev. 2.09
- 9 -
4-3-2 Setting “Switch 2”
1) Click the “Switch 2 Status” button.
2) Select the one to change the status in the “Virtual Memory Switch Status” box.

Impact / Inkjet Printer
Rev. 2.09
- 10 -
3) Each function of the Memory Switch is the same as the following list.
(1) External Buzzer
You can select buzzer-mode as “Buzzer Off” or ”Buzzer On”.
The external buzzer such as a melody box sounds depending on the printer's
status
(2) Internal Buzzer
you can select buzzer-mode as “Buzzer Off” or ”Buzzer On”.
The internal buzzer sounds depending on the printer's status.
(3) Upside-down Printing
The user can select “Upside-down Printing” or “Normal Printing”.
(4) Select Character Font
Select one of the font types. “7X9” or “9X9”.
(5) Buzzer when paper out
When paper finishes, you can select buzzer-mode as “Buzzer On” or “Buzzer Off”.
(6) Paper End Signal
When paper finishes, you can select signal-mode as “Signal Off” or “Signal On”.
It is only applied when NearEnd Sensor dip-switch is turned on.
(7) Select Cover Open Status
When cover is opened, you can select detect-mode as “Paper-out” or “Cover
open”.
(8) Bufferfull Release
When printer-buffer is full, select recover-speed as “Normal” or “Fast”.
(9) Buffer Size
The user can select Buffer Size of the printer.
(10) Cover is opened while printing
When cover is opened while printing, you can select recover-mode as
“Automatically recoverable” or “Recoverable by command”.
* Memory Switch 2 is only applied in SRP-275II and SRP-275III Printer Model.