Black Box LPH3061A User manual

STEP X - Name of Step
24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM
LPH3061A
INDUSTRIAL
POE SWITCH
QUICK START GUIDE

STEP 1 - Package Includes
WHAT’S INCLUDED
• (1) LPH3061A INDUSTRIAL SWITCH
• (2) WALLMOUNTING BRACKETS
WITH SCREWS
• (1) DIN RAIL MOUNTING BRACKET
WITH SCREWS
• THIS QUICK START GUIDE

STEP 2 - LPH3061A Hardware Overview
TABLE 1. LPH3061A COMPONENTS
NUMBER DESCRIPTION
1 6-pin terminal block for power
2 SFP cage
3 Power 1 LED
4 Power 2 LED
5 Power Fail LED
6Link/Activity LED
7 Speed LED
8(5) RJ-45 connectors
3, 4, 5
6
7
8
1
2

STEP 2 - Install the SFP
Choose a compatible SFP from Table 2
and snap it into place in the SFP cage
on the switch.
NOTE: The SFPs are ordered separately.
TABLE 2. COMPATIBLE SFPS
PRODUCT
CODE DESCRIPTION
LFP401 SFP/155 Ext. Diag., MM 2-km, LC
LFP402 SFP/155 Ext. Diag., MM 2-km, LC
LFP403 SFP/155 Ext. Diag., SM 30-km, LC
LFP404 SFP/155 Ext. Diag., SM 60-km, LC
LFP411 SFP/1250 Ext. Diag., MM 550-m, LC
LFP412 SFP/1250 Ext. Diag., MM 2-km, LC
LFP413 SFP/1250 Ext. Diag., SM 20-km, LC
LFP414 SFP/1250 Ext. Diag., SM 30-km, LC
LFP418 SFP/1250 Ext. Diag., SM 80-km, LC
LFP420 SFP/1250 Ext. Diag., SM 10-km, LC
LFP421 SFP/1250 Ext. Diag., SM 10-km, LC

STEP 3 - Connect the Power
POWER CONNECTION STEPS
The LPH3061A switch supports dual 48 VDC
power inputs and changes relay status when
the power fails.
1. Insert the positive and negative wires
into the V+ and V- contacts on the terminal
block connector.
2. Tighten the wire clamp screws to prevent
the DC wires from loosening.
PWR 2 PWR 1 1 A @ 24 V
V2- V2+ V1- V1+
Fault

STEP 4A - DIN Rail Mounting
INSTALLING THE DIN R AIL KIT
Attach the DIN rail bracket to the DIN rail using
the included screws. See Figure A.
++++++
REMOVING THE DIN R AIL KIT
1. Remove the screws from the DIN rail.
2. Lift the switch up and off from the DIN rail.
See Figure B.
++++++
B
A
B
A

STEP 4B - Wallmounting
WALLMOUNTING STEPS
1. Using the included screws, attach
the wallmount brackets to the switch.
2. With the brackets attached, hang the switch
on the nails on the wall.

STEP X - Name of Step
COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.