BlackVue DR750G Pro User manual

Formatting an SD Card on a PC
1. Power off the dashcam and remove the cables.
2. Remove the camera.
3. Remove the microSD card located as shown below (press down on the card gently to release it).
4. Insert microSD card into the MicroSD card reader.
5. Insert the card reader (provided with Dashcam) into your computer via USB.

6. Download and install the BlackVue Windows Viewer.
7. Run the program after installation and click SD Card Viewer.
8. Click the MicroSD icon to format.
9. Select your SD Card (will show your model number) from the list as shown below then click Format then YES
to confirm.

10. You can now remove the SD card from your PC and place it back into your Camera. Turn on the camera and
you should hear “Initialising SD Card, please do not disconnect the power. It should then start up as normal.
NOTE: Ensure you realign your dash cam using Live View. The camera can rotate within the mount up or down.
If after this, the unit still does not start up as it should, please contact Blackvue support on [phone].