BLAUBERG Ventilatoren Aero 100 User manual

User’s manual
Aero

BLAUBERG Company is happy to offer your attention a new high
quality Blauberg Aero fan. The solid team of highqualified
professionals with many years of working experience,
technological innovations in design and production, highquality
components and materials from the top worldwide producers have
become the precondition for the best fan in its class.
Introduction
The present user’s manual contains a technical description, technical
data sheets, operation and mounting guidelines, safety precautions and
warnings for safe and correct operation of the Aero fan.
Purpose
The Aero fan is designed for ventilation of residential and public spaces
heated during winter season. The fan is designed for wall or ceiling
mounting (Fig. 35).
The fan is equipped with a nonreturn valve to prevent back air flow
during the fan standby.
Delivery set
•Fan – 1 pc.
•Screws and dowels – 4 pcs.
•Plastic screwdriver (for the models with a timer) – 1 pc.
•User's manual
•Packing box
The fan design is regularly improved, so some models may slightly
differ from those ones described herein.
2

Table 1
Switch (S) – builtin pull cord switch.
Timer (T) – turnoff delay time from 2 to 30 minutes.
Humidity sensor (H) – threshold value from 60 % to 90 %.
Motion sensor (IR) – detection area from 1 to 4 m and sensor viewing
angle up to 100°.
The fan does not cause interference to radio, television or video
equipment.
Service life is not less than 5 years.
Model
Aero ___
Aero ___ S
Aero ___ T
Aero ___ ST
Aero ___ H
Aero ___ SH
Aero ___ IR
Switch Timers Humidity
sensor
Motion
sensor
Table 2
3
Technical data
The fan designations, parameters, outer view, overall and connecting
dimensions are shown in Tables 1, 2, 3 and in Fig. 1 and 2.
Model
Maximum
air flow
3
[m /h]
Rated power [W]
Noise
level
[dBA]
1
RPM [min ]
Aero 100 14 2300
102 38
Aero 125 16 2400193 39
Aero150 24 2400
309 40
Aero Still 100 5.5 1900
84 25
Aero Still 125 1900158 31
Aero Still 150 19 1900
254 33
9.4

Dimensions [mm]
Table 3
Model
Aero 100
Weight
[kg]
4
Figure 2
Figure 1
Aero 125
Aero 150
a
144
168
198
b
122
144
170
d
100
125
150
e
29,5
30
30
0,56
0,73
0,9
c
92,5
97
119
1
2
3
4
5
1 – cover
2 – timer
3 – switch
4 – casing
5 – nonreturn valve

5
Operation guidelines
The fan is connected to 220...240 V/50 Hz singlephase AC mains and is
designed for continuous operation without disconnection from the
electric mains.
Airflow direction must be in compliance with the direction of the arrow on
the fan casing.
The fan is rated for operation at the ambient temperature ranging from
+1 °C up to +45 °C.
The unit is rated as a Class II electrical appliance.
Safety requirements
Disconnect the unit from power supply prior to any connection, servicing
and repair operations.
All mounting and servicing operations should be performed by duly
qualified electricians with valid electrical work permit for works with
electrical devices powered from AC up to 1000 V and after careful study
of the present User’s manual.
Singlephase power mains must comply with the acting local electrical
norms and standards. Fixed electrical wiring must be equipped with an
automatic circuit breaker. The unit must be connected to power mains
through an automatic circuit breaker integrated into the fixed wiring
system.
The gap between the circuit breaker contacts on all poles must be not
less than 3 mm.
Check the fan for any visible damages of the impeller and the casing
before starting installation. The casing internals must be free of any
foreign objects which can damage the impeller blades.
Misuse of the unit and any unauthorized modifications are not allowed.

The unit is not allowed for use by children and persons with reduced
physical, mental or sensory capacities, without proper practical
experience or expertise, unless they are controlled or instructed on the
product operation by the person(s) responsible for their safety.
Supervise the children and do not let them play with the unit.
Take steps to prevent ingress of smoke, carbon monoxide, and other
combustion products into the room through open chimney flues or
other fireprotection devices. Sufficient air supply must be provided for
proper combustion and exhaust of gases through the chimney of fuel
burning equipment to prevent back drafting.
The transported air must not contain any dust or other solid impurities,
sticky substances or fibrous materials.
The fan is not rated for operation in a media that contains hazardous or
explosive materials and vapours, i.e. spirits, gasoline, insecticides, etc.
Do not close or block the fan intake or extract vents in order to ensure
the efficient air stream.
Do not sit on the unit and do not put objects on it.
Following the regulations stipulated herein will ensure a long and
troublefree operation of the unit.
6

7
Installation and setup
The fan mounting sequence is shown in Fig. 89.
The fan wiring diagrams are shown in Fig. 1016.
Figure 3Figure 4
Figure 5

8
Figure 7Figure 6
Figure 9
Figure 8
mm

Wiring diagrams and operation algorithms of the fan
Aero _____
S – external switch
QF – automatic circuit breaker
Aero _____S
QF – automatic circuit breaker
QF
S
QF
S
Fan does not run
Circuit breaker
closing
Fan runs
Circuit breaker
opening
QF Fan does not run
Pull the cord switch
Fan runs
Pull the cord switch
9
Figure 10
Figure 11
S
N
L
N
L
N
L
N
L
N
L
N
L

QF
SL
N
LT
N
L
QF
SL
N
LT
N
L
Fan does not run
Fan runs
Pull the cord switch
Pull the cord switch
Fan does not run
Circuit breaker
closing
Fan runs
Circuit breaker
closing
Turn-off delay
timer activation
(2…30 minutes)
10
Aero _____T
S – external switch
QF – automatic circuit breaker
Aero _____ST
QF – automatic circuit breaker
S
Figure 12
Figure 13
+
-
2min 30min
T
+
-
2min 30min
T
QF
L
N
LT
N
L
Turn-off delay
timer activation
(2…30 minutes)