BLAUBERG Smart Wi-Fi User manual

Axial intelligent fan
USER’S MANUAL

2www.blaubergventilatoren.de
Smart Wi-Fi
CONTENTS
Delivery set........................................................................................................................................................................................ 6
Technical data.................................................................................................................................................................................. 6
Installation and set-up................................................................................................................................................................ 9
Connection to power mains .................................................................................................................................................. 11
Operation guidelines .................................................................................................................................................................. 11
Unit control ....................................................................................................................................................................................... 12
Storage and transportation regulations.......................................................................................................................... 24
Technical maintenance.............................................................................................................................................................. 25
Manufacturer’s warranty........................................................................................................................................................... 26

3
www.blaubergventilatoren.de
Smart Wi-Fi
This user’s manual is a main operating document, intended for technical, maintenance, and operating staff.
The manual contains information about the purpose, technical details, operating principle, design, and installation of the Smart Wi-Fi
unit and all of its modifications.
Technical and maintenance staff must have theoretical and practical training in the field of ventilation systems and should be able to
work in accordance with workplace safety rules as well as construction norms and standards applicable in the territory of the country.
The information in this user’s manual was correct at the time of the document’s preparation.
The Company reserves the right to modify the technical characteristics, design, or configuration of its products at any time in order to
incorporate the latest technological developments.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any information
search system or translated into any language in any form without the prior written permission of the Company.
READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.
COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG SERVICE LIFE OF THE
UNIT.
KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO RE-READ THE
INFORMATION ON THE PRODUCT SERVICING.

4www.blaubergventilatoren.de
Smart Wi-Fi
Disconnect the unit from power supply prior to any connection, servicing, maintenance, and repair operations.
Only qualied electricians with a work permit for electrical units up to 1000V are allowed for installation and maintenance.
The present user’s manual should be carefully read before beginning works.
• Single-phase power mains must comply with the acting local electrical norms and standards.
• Fixed electrical wiring must be equipped with an automatic circuit breaker.
• The unit must be connected to power mains through a QF automatic circuit breaker integrated into the fixed wiring system. The
gap between the circuit breaker contacts on all poles must be not less than 3 mm. Check the unit for any visible damages of the
impeller and the casing before starting installation. The casing internals must be free of any foreign objects that can damage the
impeller blades.
• While mounting the unit, avoid compression of the casing! Deformation of the casing may result in the motor jam and noisy
operation. Misuse of the unit and any unauthorised modifications are not allowed.
• Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into the room through open chimney
flues or other fire-protection devices. Sufficient air supply must be provided for proper combustion and exhaust of gases through
the chimney of fuel burning equipment to prevent back drafting. Transported air must not contain any dust or other solid
impurities, sticky substances, or fibrous materials.
• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc.
• Do not close or block the intake or extract vents in order to ensure the efficient air flow.
• Do not sit on the unit and do not put objects on it.
FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND
TROUBLE-FREE OPERATION OF THE UNIT.

5
www.blaubergventilatoren.de
Smart Wi-Fi
THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.
DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.
• The unit is allowed to be used by children aged from 8 years old and above and persons with reduced physical, sensory, or mental
capabilities or no experience and knowledge provided that they have been given supervision or instruction regarding safe use of
the unit and understand the risks involved.
• Do not allow children to play with the unit.

6www.blaubergventilatoren.de
Smart Wi-Fi
DELIVERY SET
Fan 1 pc.
Logo 1 pc.
Spigot Ø 100 mm 1 pc.
Spigot Ø 125 mm 1 pc.
Screws and dowels 4 pcs.
User’s manual 1 pc.
Packing box 1 pc.
TECHNICAL DATA
The product described herein is the axial fan made of high-quality plastic designed for extract ventilation within small and medium-
sized residential premises that are heated during the winter period.
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.
Voltage [V] 100-240
Frequency [Hz] 50-60
Maximum power [W] 6.0
Current [A] 0.07
RPM [min] 2200
Maximum air capacity [m/h] 133
Electrical protection class IP44

7
www.blaubergventilatoren.de
Smart Wi-Fi
TECHNICAL DATA
Model Spigot
diameter Speed Maximum
power, [W] Current, [A] RPM,[min] Air ow,
[m/h]
Noise level at,
3 m [dBA]
Smart Wi-Fi
100
24 hours 1.6 0.02 950 33 17
Silent 2.9 0.04 1650 72 21
Max 5.6 0.06 2150 106 31
125
24 hours 1.7 0.03 850 40 17
Silent 3 0.04 1350 83 22
Max 6 0.07 2200 133 32
FAN MODIFICATIONS
Model
Functions
Humidity
control
24
hours
Turn-on
delay timer
Turn-o
delay timer
Speed
control
Interval
ventilation
External
switch
Motion
sensor
Smart Wi-Fi + + + + + + +
Smart Wi-Fi
IR + + + + + + + +

8www.blaubergventilatoren.de
Smart Wi-Fi
OVERALL DIMENSIONS
32
206
152
FAN OPERATION MODES
Standby mode – the fan motor does not rotate, the rotation is activated when the 24 hours mode is activated by a mobile application
or by a signal from a temperature/humidity/motion or an external switch.
24 hours - fan operation at low speed to ensure minimum round-the-clock ventilation.
When a temperature/humidity/motion or an external switch is triggered, the fan switches to Silent or Max mode.
Silent – silent operation mode of the fan. This mode is activated by a motion sensor or an external switch.
Max – high-speed fan operation mode, which is activated when a humidity or temperature sensor is triggered or Boost Mode is
activated via the mobile application.

9
www.blaubergventilatoren.de
Smart Wi-Fi
INSTALLATION AND SET-UP
1. In case of vertical mounting the fan must be protected against
water and condensation collecting inside the fan.
Fan installation with direct air discharge upwards is not allowed.
2. Before starting the installation, make sure all electricity has
been turned off!
QF
L N
3. Remove the front panel of the fan. 4. Mark the holes for fixing the fan and the power cable.

10 www.blaubergventilatoren.de
Smart Wi-Fi
5. Lead the power cable to the ventilation hole, drill the mounting
holes and install the dowels.
6. Fix the fan with the screws.
7. Remove the cover to access the terminal block and connect
the fan to power mains according to the wiring diagram.
Assemble the fan in the reverse order.
8. Supply power to the fan.
ON

11
www.blaubergventilatoren.de
Smart Wi-Fi
CONNECTION TO POWER MAINS
The fan is rated for connection to single-phase AC 100-240 V/50 (60) Hz.
TERMINAL DESIGNATIONS ON WIRING DIAGRAMS:
L – phase
N– 0
LT – fan speed control circuit
LI – output for external load connection
SK – switch for speed change
LT
L
N
LI
SK
NL
OPERATION GUIDELINES
Ingress protection rating against access to hazardous parts and water ingress is IP44.
The fan is rated for operation at the ambient temperature ranging from +1 °C up to +45 °C.
The unit is rated as a Class II electrical appliance.

12 www.blaubergventilatoren.de
Smart Wi-Fi
UNIT CONTROL
The fan is controlled by the application on the mobile device.
The application is available for download at App Store, Play Market or via the QR code.
App Store download link Play Market download link
By default, the fan operates as a Wi-Fi access point.
After installing the application, connect the mobile device to the fan as to a Wi-Fi access point (FAN:
+ 16 characters of the ID number) indicated on the control board and on the fan casing.
Wi-Fi hotspot password: 11111111.
Run the installed application on the mobile device connected to the fan. When starting the
application, a message on the absence of communication with the fan appears on the screen if the
device is not connected to the fan.

13
www.blaubergventilatoren.de
Smart Wi-Fi
Select a desired connection type.
1. Enter the app menu.
2. Select Connection-Connection list.
3. If the fan is operating in Wi-Fi access point mode, select the Default connection. Connection is initiated automatically.
4. If the fan is connected to a home Wi-Fi network, search for devices on the network.
5. In the list, you will see a connection with the ID number of the fan. Highlight it.
6. If necessary, change the connection name.
7. Save the updated details.
1
2
3
4 6
5
7

14 www.blaubergventilatoren.de
Smart Wi-Fi
WIFI PARAMETER SETUP
Go to the application menu on your mobile device Menu – Connection – Wi-Fi setup.
Then, press Receive. The screen will display the current Wi-Fi parameter settings.
Select one of the Wi-Fi operation modes: Access point or Client.
Access point – access point mode without a home router.
In this mode, up to 8 mobile devices can be connected to the
fan to control it.
Client – the fan operates on the home router network.
Select the desired security level for the Access point mode:
• Open – open Wi-Fi network without a password.
• WPA PSK – password-protected. Encryption technology,
using the WPA protocol, which does not guarantee
complete security.
• WPA2 PSK –type of data encryption for modern network
devices.
• WPA/WPA2 PSK –password-protected (recommended).
Combined technology that activates WPA and WPA2 and
at the same time provides maximum compatibility with
any of your devices.
Enter your access point password and press the APPLY button.
Enter the home router details for the Client mode.
• Enter the name of the Wi-Fi home router access point.
• Enter the password for the Wi-Fi home router access point.
Then press the APPLY button.
1
2
3

15
www.blaubergventilatoren.de
Smart Wi-Fi
SPECIAL SETUP MODE/RESET
To restore the Wi-Fi password or connect to the fan in order to change the settings, Setup Mode is provided .
To enter the Setup Mode, press and hold the button below the front panel of the ventilator for 5 seconds until the LED starts blinking
blue.
The unit will continue in this mode for 3 minutes and then will automatically revert to the previous settings.
To immediately exit the setup mode, press and hold the button again for 4 seconds until the LED stops blinking blue and starts glowing
red. In Setup Mode, connect to the fan using a mobile device:
Wi-Fi name: Setup mode.
Wi-Fi password: 11111111.
To reset factory settings, press and hold the button for 14 seconds until the LED starts blinking red and a beep is produced.
Button
LED
The LED has the following states:
• Switched o. Normal operation mode of the device.
• Glowing blue. Warning of switching the device to the Setup
Mode.
• Blinking blue. The device is in Setup Mode.
• Glowing red. Warning of return to factory settings or exit from
the Setup Mode.
• Blinking red. All the fan parameters are successfully reset to
factory settings.

16 www.blaubergventilatoren.de
Smart Wi-Fi
ACCESS TO THE BUTTON
Indicators:
— turn-on or turn-off delay timer operation
indicator
— humidity exceeding indicator
t
— temperature rise indicator
— warning indicator (battery needs replacing)
— external switch operation indicator
— motion sensor indicator
— Interval ventilation mode indicator
turning the fan on/off — Do Not Disturb mode indicator
Sensor readings:
BOOST
14:59
switching the BOOST mode on/off.
The timer is set in the menu Settings – Timers (Turn-off
delay timer). The speed is set in the menu Settings – Modes
(Max speed)
— current temperature
%— current humidity

17
www.blaubergventilatoren.de
Smart Wi-Fi
CLOCK WITH CURRENT TIME
To set the clock for the current time, go to the Settings - Current
time menu.
Current time is used to indicate the time and operation of some
scheduled modes (see Modes).
When the fan is disconnected from the mains, the clock continues
to operate from an external power source.

18 www.blaubergventilatoren.de
Smart Wi-Fi
FACTORY SETTINGS RESTORE
1
2
To restore the factory settings, go to the Settings – Setting
reset menu. Then click Reset to factory settings.
After restore, connection with device may be lost due to Wi-Fi
settings reset.
If necessary, reset your Wi-Fi connection.
You can also reset the settings using the Setup Mode/Reset
button.
FIRMWARE
To view the firmware version, go to the Settings-Firmware menu.
This menu displays the current firmware version and date.

19
www.blaubergventilatoren.de
Smart Wi-Fi
SENSOR OPERATION SETUP
When setting up the sensors, take into account that it is possible to select the operation by a temperature sensor or any other sensors
(humidity, motion an external switch).
ADJUSTMENT OF OPERATION BASED ON TEMPERATURE SENSOR
Go to the Settings – Sensors menu, set and activate the temperature sensor. Thereafter, adjustment of other sensors is not possible.
Then set the temperature threshold.
If the temperature threshold is exceeded longer than the turn-on delay timer, the fan will switch to the MAX high speed to remove
excess heat.
After the room temperature drops 4 ° C below the set threshold, the fan switches to the previous mode.
12

20 www.blaubergventilatoren.de
Smart Wi-Fi
ADJUSTMENT OF OPERATION BASED ON HUMIDITY SENSOR
Go to the Settings – Sensors menu and deactivate the temperature sensor, then select one of the humidity sensor operating modes.
Three modes are available:
Disable – the humidity sensor is deactivated.
Auto – intelligent humidity control.
This mode provides for changing the humidity threshold and fan speed selection in automatic mode, independently choosing the
optimal threshold for the room where the fan is located.
The choice of the fan operation algorithm is determined by analysing the indoor humidity level statistics.
Manual – manual mode, which allows you to set the threshold in the range of 40 % to 80 %.
If the threshold is exceeded for more than the set turn-on delay timer, the fan switches to the Max high speed.
1
2
3