Blue Diamond 127006 User manual

Operation and Maintenance Manual
Standard Duty
Tree Puller
888-376-7027 | BlueDiamondAttachments.com
Register your
WARRANTY
within 30 days
of purchase
127006

Blue Diamond® Attachments2
Thank you for your decision to purchase a Blue Dia-
mond® Standard Duty Tree Puller. To ensure maximum
performance of your equipment, it is mandatory that you
thoroughly study the Operator’s manual and follow the
recommendations. Proper operation and maintenance
are essential to maximize equipment life and prevent
personal injury.
Operate and maintain this equipment in a safe man-
ner and in accordance with all applicable local, state,
and federal codes, regulations and /or laws. Follow all
on-product labeling and instructions.
Make sure that all personnel have read this Operator’s
Manual and thoroughly understand safe and correct
operating, installation and maintenance procedures.
Blue Diamond is continually working to improve its
products. Blue Diamond reserves the right to make any
improvements or changes as deemed practical and pos-
sible without incurring any responsibility or obligation
to make any changes or additions to equipment sold
previously.
Although great care has been taken to ensure the
accuracy of this publication, Blue Diamond makes no
warranty or guarantee of any kind, written or expressed,
implied or otherwise with regard to the information
contained within this manual. Blue Diamond assumes
no responsibility for any errors that may appear in this
manual and shall not be liable under any circumstances
for incidental, consequential or punitive damages in con-
nection with, or arising from the use of this manual.
Keep this manual available for frequent reference. All
new operators or owners must review the manual before
using the equipment and annually thereafter. Contact
your Blue Diamond Attachments Dealer for assistance,
information, or additional copies of the manual. Contact
www.bluediamondattachments.com or call 888-376-
7027 for a complete list of dealers in your area.
Serial Number Location:
Please record attachment information in the space pro-
vided for future reference.
Model Number:_____________________________
Serial Number: _____________________________
Dealer Name: ______________________________
Dealer Number:_____________________________
Date of Purchase:___________________________
The serial plate is located on the top right of the attach-
ment, on the mounting frame.
Always use your serial number when requesting infor-
mation or when ordering parts.
NOTE: The directions left, right, front and rear, as
mentioned throughout this manual, are as viewed from
the operator’s position.
Introduction: Owner Information
Revision Date: 02.20.2023

3Blue Diamond® Attachments
Table of Contents
1. Introduction......................................................................................4
1.1 Attachment Identification.........................................................4
2. Safety ...........................................................................................5-7
2.1 General Safety Information.................................................... 5
3. Operation ................................................................................... 8-11
3.1 General Information................................................................. 8
3.2 Attachment Installation.......................................................... 9
3.3 Operating the Attachment ....................................................11
4. Maintenance ............................................................................12-14
4.1 Maintenance Safety................................................................12
4.2 Service Schedule ...................................................................13
4.3 Storing the Attachment.........................................................14
5. Assembly.......................................................................................15
5.1 Tree Puller Parts ......................................................................15
6. Specifications ..........................................................................16-17
6.1 Tree Puller Specifications......................................................16
6.2 Torque Specifications ........................................................... 17
7. Warranty .........................................................................................19

Blue Diamond® Attachments4
1. Introduction
1.1 Attachment Identification
M F
P J
H S
C

5Blue Diamond® Attachments
2. Safety
2.1 General Safety Information
This SAFETY ALERT SYMBOL identifies
important safety messages on the equipment
and in the owner’s manual. When you see this
symbol, be alert to the possibility of personal
injury and carefully read the message that
follows.
SAFETY ALERT SYMBOL
The signal word DANGER on the machine and
in the manuals indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
DANGER
WARNING
The signal word WARNING on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
The signal word CAUTION on the machine and
in the manuals indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against unsafe practices.
CAUTION
Safe Operation Needs a Qualified Operator
WARNING
AVOID SERIOUS INJURY OR DEATH
Operators must receive instructions before
operating the machine. Untrained operators
can cause serious injury or death. For an
operator to be qualified, he or she must not
use drugs or alcoholic drinks which impair
alertness or coordination while working. An
operator who is taking prescription drugs
must get medical advice to determine if he
or she can safely operate a machine and the
equipment.
Operator Training
• Check the rules and regulations at your
location. The rules may include an employer’s
work safety requirements. Regulations may
apply to local driving requirements or use
of a Slow Moving Vehicle (SMV) emblem.
Regulations may identify a hazard such as a
utility line.
• The new operator must start in an area without
bystanders and use all the controls until he or
she can operate the machine safely under all
conditions of the work area.
IMPORTANT
The signal word IMPORTANT identifies
procedures which must be followed to avoid
damage to the machine.

Blue Diamond® Attachments6
2. Safety
2.1 General Safety Information
Importance of Safety
Operating Safety
• Read and follow instructions in this manual
and the machine’s Operator’s Manual before
operating.
• This equipment is dangerous to persons
unfamiliar with its operation.
• Check for overhead and / or underground lines
before operating equipment (if applicable).
• In addition to the design and configuration
of equipment, hazard control and accident
prevention are dependent upon the
awareness, concern, prudence and proper
training of personnel involved in the operation,
transport, maintenance and storage of
equipment.
• Check that the attachment is securely fastened
to the machine.
• Make sure all the machine controls are in
NEUTRAL before starting the machine.
• Operate the equipment only from the
operator’s position.
• Operate the equipment according to the
Operator’s Manual.
• When learning to operate the equipment, do it
at a slow rate in an area clear of bystanders.
• DO NOT permit personnel to be in the work
area when operating the equipment.
• The equipment must be used ONLY on
approved machines.
• DO NOT modify the equipment in any way.
Unauthorized modification may impair the
function and / or safety and could aect the
life of the equipment. Warranty may also be
aected or voided.
• DO NOT make any adjustments or repairs on
the equipment while the machine is running.
• Keep shields and guards in place. Replace if
damaged.
• DO NOT operate equipment in poor visibility
conditions such as fog, darkness, or any
conditions that limit clear visibility less than
300 feet (100 m) in front of and to the sides of
the equipment.
• DO NOT operate in a work area that has
not been inspected for foreign debris and
obstacles.
• Remove any foreign objects and clearly mark
any objects that cannot be removed.
• Wear safety glasses, gloves, hearing protection
and other protective clothing when required.

7Blue Diamond® Attachments
2. Safety
2.1 General Safety Information
Importance of Safety (Cont’d)
Fire Prevention Safety
• Flammable debris (leaves, grass, etc.) must
be removed regularly. If flammable debris
is allowed to accumulate, it can cause a fire
hazard. Clean often to avoid this accumulation.
• All fuels, most lubricants and some coolant
mixtures are flammable. Flammable fluids that
are leaking or spilled onto hot surfaces or onto
electrical components can cause a fire.
Transporting Safety
• Comply with state and local laws governing
highway safety and movement of machinery on
public roads.
• Check local laws for all highway lighting and
marking requirements.
• Never allow riders on either machine or
equipment.
• If transporting the attachment on a truck or
trailer, make sure it is properly secured to the
transport vehicle.
Hydraulic System
• Check hydraulic tubes, hoses and fittings for
damage and leakage. Never use open flame
or bare skin to check for leaks. Hydraulic tubes
and hoses must be properly routed and have
adequate support and secure clamps. Tighten
or replace any parts that show leakage.
• Always clean fluid spills. Do not use gasoline or
diesel fuel for cleaning parts. Use commercial
nonflammable solvents.

Blue Diamond® Attachments8
3. Operation
3.1 General Information
Pre-Operation Inspection
Before operating the Tree Puller for the first time
and each time thereafter, use the following list as a
guideline during equipment inspection.
WARNING
AVOID SERIOUS INJURY OR DEATH
• Disengage machine’s auxiliary hydraulics,
engage the machine’s parking brake, stop
the engine and make sure all rotating
components are completely stopped before
connecting, disconnecting, adjusting or
cleaning equipment.
• Always keep shields and all guards in place
when using the equipment.
• Disengage machine’s auxiliary hydraulics for
road travel.
• Keep hands, feet and clothing away from
rotating parts.
• Lubricate the attachment per the schedule
outlined in the Maintenance Section. See
“Service Schedule” on page 13.
• Check the tree puller mounting frame for
damage or cracks.
• Check that all shields and guards are in place.
• Check for loose bolts and tighten them if
necessary.
• Check all welds on the attachment for wear
and damage each time the attachment is
removed from the machine.
• Check for damaged or missing safety decals.
Replace if necessary.
• Inspect the machine’s mounting frame. (See
the machine’s Operator’s Manual for inspecting
the mounting frame). Replace any parts
that are damaged, bent or missing. Keep all
fasteners tight. Look for cracked welds.
WARNING
Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required. Wear goggles.
Use cardboard to check for leaks.
• Check condition of all hydraulic components
for leaks. Repair as required.
NOTE: Do not operate with hydraulic leaks.
• Verify that the tree puller is properly connected
to the machine.

9Blue Diamond® Attachments
3. Operation
3.2 Attachment Installation
SEE MACHINE’S OPERATOR’S MANUAL FOR
DETAILED INFORMATION ON OPERATING
THE LOADER.
IMPORTANT
Entering the Operator’s Position
Use the attachment safety treads, handles and
steps (on the machine) to enter the operator’s
position.
When in the operator’s position, lower safety seat
bar, fasten the seat belt, start the engine and
release the parking brake.
Leaving the Operator’s Position
WARNING
AVOID SERIOUS INJURY OR DEATH
Before servicing the attachment:
• Always park on a flat level surface.
• Lower lift arms and place attachment flat
on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Wait for all moving parts to stop.
• Stop the engine and remove the key.
SEE MACHINE’S OPERATOR’S MANUAL FOR
ADDITIONAL INFORMATION.
Park the machine / attachment on a flat level
surface. Place all controls in neutral, engage
the park brake and stop the engine. Leave the
operator’s position.
Connecting Attachment to the Machine
WARNING
CRUSH HAZARD
• Before moving the machine, look
in all directions and make sure no
bystanders, especially small children are
in the work area. Do not allow anyone
between the machine and attachment
when approaching the attachment for
connecting.
• Keep fingers and hands out of
pinch points when connecting and
disconnecting attachment.
Before connecting to the attachment, inspect the
machine’s mounting plate. (See the machine’s
Operator’s Manual for inspecting the mounting
frame).
(See the machine’s Operator’s Manual for
inspecting the mounting frame).
Enter the operator’s position. See “Entering the
Operator’s Position” on page 9.
Drive the machine slowly forward, until the top
edge of the machine’s mounting plate is under the
top flange of the attachment mounting frame.

Blue Diamond® Attachments10
3. Operation
3.2 Attachment Installation
Connecting Attachment to the Machine
(Cont’d)
Slowly tilt the machine’s mounting plate back until
the attachment mounting frame fully contacts the
front of the machine’s mounting plate.
Leave the operator’s position. See “Leaving the
Operator’s Position” on page 9.
WARNING
AVOID SERIOUS INJURY OR DEATH
The locking pins / wedges must extend
through the holes in the attachment
mounting frame. Failure to secure locking
pins / wedges can allow attachment to come
o.
SEE MACHINE’S OPERATOR’S MANUAL FOR
ADDITIONAL INFORMATION.
Engage attachment locking levers / wedges (See
the machine’s Operator’s Manual for detailed
information).
Connecting Hydraulic Hoses
IMPORTANT
Thoroughly clean the quick couplers before
making connections. Dirt can damage the
hydraulic system.
Remove dirt or debris from the male and female
couplers. Visually inspect the couplers for
corroding, cracking, damage, or excessive wear.
Connect the attachment hydraulic hoses to
the machine. Pull on each hose to verify full
connection is made.
Disconnecting Hydraulic Hoses
WARNING
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick
couplers can get hot during operation. Be
careful when connecting and disconnecting
hydraulic hoses.
Relieve auxiliary hydraulic pressure. (See
the machine’s Operator’s Manual for correct
procedure.)
Disconnect attachment hydraulic hoses from the
machine.
Disconnecting Attachment from the
Machine
Relieve auxiliary hydraulic pressure. (See
the machine’s Operator’s Manual for correct
procedure.)
Park the machine and attachment on a flat level
surface.
Lower the tree puller flat on the ground.
Leave the operator’s position. See “Leaving the
Operator’s Position” on page 9.
Disconnect attachment hydraulic hoses from the
machine. Connect the hydraulic couplers together
or install plugs or caps on the couplers.
Disengage locking pins / wedges. (See the
machine’s Operator’s Manual for correct
procedure.)
Enter the operator’s position. See “Entering the
Operator’s Position” on page 9.

11Blue Diamond® Attachments
3. Operation
3.2 Attachment Installation
Disconnecting Attachment from the
Machine (Cont’d)
Slowly tilt the machine’s mounting plate forward
until the attachment mounting frame is free from
the machine’s mounting plate.
Drive the machine slowly backward, away from the
attachment.
3.3 Operating the Attachment
Machine Requirements
The tree puller attachment can be used for pulling
up to 8” trees and shrubs. Some wood types may
be more dicult — not all 8” trees will be easily
pulled.
• Only use tree puller on compatible loaders.
• Refer to the machine’s operator’s manual for
flow and pressure specifications.
Operating the Tree Puller
Install the Tree Puller onto the loader. (See
the machine’s operator’s manual for correct
procedure).
Open the cylinder, and clamp tree or bush as near
to the attachment plate as possible.
Pull upward until roots are clear of the ground
taking caution to keep the prime mover balanced.
Depending on the diculty, taking a new grip from
a dierent direction or shaking the tree or bush
may help.
WARNING
Never allow riders on the tree puller.

Blue Diamond® Attachments12
4. Maintenance
WARNING
AVOID SERIOUS INJURY OR DEATH
Never operate the machine in a closed
building. Proper ventilation is required
when operating the machine under all
circumstances.
• Always keep the work area clean and dry.
• Always use personal protection devices such
as eye, hand and hearing protection when
performing any service or maintenance.
• A fire extinguisher and first aid kit should
be readily accessible while performing
maintenance on this machine.
• Before working or doing maintenance on this
machine, shut o the engine and remove
the key. Make sure the machine’s wheels are
blocked.
• Never work under the machine or attachment
unless the machine or equipment is blocked or
supported securely.
• Disconnect the battery (both terminals) before
welding on any part of the machine. Failure
to do so may cause damage to electrical
components.
• When working around batteries, remember
that all of the exposed metal parts are “live”.
Never lay a metal object across the terminals
because a spark, short circuit, explosion or
personal injury may result.
• Battery posts, terminals and related
accessories contain lead and lead compounds.
Wash hands after handling.
• Always relieve hydraulic system pressure
before repairing, adjusting or disconnecting.
Never search for leaks with your hands.
• When replacement parts are necessary,
genuine factory replacement parts must be
used to restore your equipment to original
specifications. Blue Diamond will not be
responsible for injuries or damage caused by
use of unapproved parts and / or accessories.
General Maintenance
To ensure ecient operation, you should inspect,
lubricate, and make necessary adjustments
and repairs at regular intervals. Keep good
maintenance records and adequately clean your
machine after each use.
Proper Maintenance and lubrication is important.
Follow instructions in the service schedule.
NOTE: Repair or replace any damaged parts.
4.1 Maintenance Safety
WARNING
AVOID SERIOUS INJURY OR DEATH
Never operate the machine in a closed
building. Proper ventilation is required
when operating the machine under all
circumstances.

13Blue Diamond® Attachments
4. Maintenance
4.2 Service Schedule
WARNING
AVOID SERIOUS INJURY OR DEATH
Never work under the machine or attachment
unless the machine or equipment is blocked
or supported securely.
IMPORTANT
Fluid such as hydraulic fluid, coolants,
grease, etc. must be disposed of in an
environmentally safe manner. Some
regulations require that certain spills and
leaks on the ground must be cleaned in a
specific manner. See local, state and federal
regulations for the correct disposal.
WARNING
AVOID SERIOUS INJURY OR DEATH
Before servicing the attachment:
• Always park on a flat level surface.
• Lower lift arms and place attachment flat
on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Wait for all moving parts to stop.
• Stop the engine and remove the key.
SEE MACHINE’S OPERATOR’S MANUAL FOR
ADDITIONAL INFORMATION.
NOTE: Check tree puller for correct function after adjustments, repairs or service.
DESCRIPTION
SERVICE PROCEDURES
Check Clean Lube Change
Daily Maintenance (or every 8 hours)
Hydraulic Fittings •
Hydraulic Hoses •
All Hardware •
Tree Puller Frame • •
Pivot Pins •
Hydraulic Cylinder •

Blue Diamond® Attachments14
Storage
Sometimes it may be necessary to store your tree
puller for an extended period of time. Below is a
list of items to perform before storage.
• Make sure the hydraulic hose couplers are
capped, plugged, or connected to each other.
• Thoroughly wash the tree puller before storing
the nursery fork for long periods.
• Lubricate the tree puller.
• Coat the exposed portion of the cylinder rod
with grease.
• Check for loose hardware, missing guards, or
damaged parts.
• Check for damaged or missing decals. Replace
if necessary.
• Replace worn or damaged parts.
• Place the attachment in a dry protected shelter.
• Place the attachment flat on the ground.
NOTE: In muddy conditions or to prevent the
attachment from freezing to the ground, put the
attachment on planks or blocks before removing
the attachment from the machine.
Return to Service
After the tree puller has been in storage, it is
necessary to follow a list of items to return the tree
puller to service
• Lubricate the tree puller.
• Install and operate the tree puller and check
for correct function.
• Check for leaks. Repair as needed.
4.3 Storing the Attachment
4. Maintenance

15Blue Diamond® Attachments
5. Assembly
5.1 Tree Puller Parts
ITEM PART NUMBER DESCRIPTION QTY
1 227100 Frame Weldment 1
2 227101 Pivot Jaw Weldment 1
3 227102 Pivot Jaw to Frame Pin 1
4 299436 Jaw Pin Bolt 1
5 299655 Jaw Pin Nut 1
6 227105 Cylinder 1
7 227103 Cylinder Pin Rod End 1
8 227104 Cylinder Pin Base End 1
9 299328 Cylinder Pin Bolt 2
10 208550 Cylinder Pin Nut 2
11 295030-M06ORB-M06JIC Cylinder to hose 90 fitting 2
12 295010-M06JIC-M06ORB Cylinder to hose straight fitting 2
13 227106 Hose Set 1
14 206327 Hose protection sleeve 6 ft
15 295010-M06JIC-M08ORB Hose to Coupler fitting 2
16 224009 Female Quick Coupler 1
17 224010 Male Quick Coupler 1
612
8
11
7
2
3
1
17
16 15 14
13
9 10
9 10
4 5

Blue Diamond® Attachments16
6. Specifications
6.1 Tree Puller Specifications
DESCRIPTION TREE PULLER
OVERALL WIDTH 46 in.
OVERALL LENGTH 30 1/2 in.
OVERALL HEIGHT 19 in.
CLAMP LENGTH 19 in.
CLAMP OPENING 12 in.
MAXIMUM TREE SIZE 8 in.
WEIGHT 415 lbs.

17Blue Diamond® Attachments
6. Specifications
6.2 Torque Specifications
Standard Hardware, Lock & Nuts
BOLT
TYPE SAE GRADE 5 SAE GRADE 8 LOCK NUTS
Nominal
Size
Plated or
Unplated
Silver
Plated W/
ZnCr
Gold
Plated or
Unplated
Silver
Plated W/
ZnCr
Gold
Plated or
Unplated
Silver
Plated W/
ZnCr
Gold
W/ Grade
5 Bolt
W/ Grade
8 Bolt
1/4 55 ft / lb
(6.2 N•m)
72 ft / lb
(8.1 N•m)
86 in / lb
(9.7 N•m)
112 in / lb
(12.6 N•m)
121 in / lb
(13.6 N•m)
157 in / lb
(17.7 N•m)
61 in / lb
(6.9 N•m)
86 in / lb
(9.8 N•m)
5/16 115 ft / lb
(13 N•m)
149 ft / lb
(17 N•m)
178 ft / lb
(20 N•m)
229 ft / lb
(26 N•m)
250 ft / lb
(28 N•m)
325 ft / lb
(37 N•m)
125 ft / lb
(14 N•m)
176 ft / lb
(20 N•m)
3/8 17 ft / lb
(23 N•m)
22 ft / lb
(30 N•m)
26 ft / lb
(35 N•m)
34 ft / lb
(46 N•m)
37 ft / lb
(50 N•m)
48 ft / lb
(65 N•m)
19 ft / lb
(26 N•m)
26 ft / lb
(35 N•m)
7/16 27 ft / lb
(37 N•m)
35 ft / lb
(47 N•m)
42 ft / lb
(57 N•m)
54 ft / lb
(73 N•m)
59 ft / lb
(80 N•m)
77 ft / lb
(104 N•m)
30 ft / lb
(41 N•m)
42 ft / lb
(57 N•m)
1/2 42 ft / lb
(57 N•m)
54 ft / lb
(73 N•m)
64 ft / lb
(87 N•m)
83 ft / lb
(113 N•m)
91 ft / lb
(123 N•m)
117 ft / lb
(159 N•m)
45 ft / lb
(61 N•m)
64 ft / lb
(88 N•m)
9/16 60 ft / lb
(81 N•m)
77 ft / lb
(104 N•m)
92 ft / lb
(125 N•m)
120 ft / lb
(163 N•m)
130 ft / lb
(176 N•m)
169 ft / lb
(229 N•m)
65 ft / lb
(88 N•m)
92 ft / lb
(125 N•m)
5/8 83 ft / lb
(112 N•m)
107 ft / lb
(145 N•m)
128 ft / lb
(174 N•m)
165 ft / lb
(224 N•m)
180 ft / lb
(244 N•m)
233 ft / lb
(316 N•m)
90 ft / lb
(122 N•m)
127 ft / lb
(172 N•m)
3/4 146 ft / lb
(198 N•m)
189 ft / lb
(256 N•m)
226 ft / lb
(306 N•m)
293 ft / lb
(397 N•m)
319 ft / lb
(432 N•m)
413 ft / lb
(560 N•m)
160 ft / lb
(217 N•m)
226 ft / lb
(306 N•m)
7/8 142 ft / lb
(193 N•m)
183 ft / lb
(248 N•m)
365 ft / lb
(495 N•m)
473 ft / lb
(641 N•m)
515 ft / lb
(698 N•m)
667 ft / lb
(904 N•m)
258 ft / lb
(350 N•m)
364 ft / lb
(494 N•m)
1213 ft / lb
(289 N•m)
275 ft / lb
(373 N•m)
547 ft / lb
(742 N•m)
708 ft / lb
(960 N•m)
773 ft / lb
(1048 N•m)
1000 ft / lb
(1356 N•m)
386 ft / lb
(523 N•m)
545 ft / lb
(739 N•m)

Blue Diamond® Attachments18
This page intentionally
left blank

19Blue Diamond® Attachments
MANUFACTURER’S LIMITED WARRANTY
BLUE DIAMOND®ATTACHMENTS, a manufacturer of quality attachments, warrants new BLUE DIAMOND®
ATTACHMENTS products and/or attachments at the time of delivery to the original purchaser, to be free
from defects in material and workmanship when properly set up and operated in accordance with the
recommendations set forth by BLUE DIAMOND®ATTACHMENTS, LLC.
BLUE DIAMOND®ATTACHMENTS liability for any defect with respect to accepted goods shall be limited to
repairing the goods at a BLUE DIAMOND®ATTACHMENTS designated location or at an authorized dealer
location, or replacing them, as BLUE DIAMOND®ATTACHMENTS shall elect. The above shall be in accordance
with BLUE DIAMOND®ATTACHMENTS warranty adjustment policies. BLUE DIAMOND®ATTACHMENTS obligation
shall terminate twelve (12) months for the Standard Duty Tree Puller after the delivery of the goods to original
purchaser.
This warranty shall not apply to any machine or attachment which shall have been repaired or altered
outside the BLUE DIAMOND®ATTACHMENTS factory or authorized BLUE DIAMOND®ATTACHMENTS dealership
or in any way so as in BLUE DIAMOND®ATTACHMENTS judgment, to aect its stability or reliability, nor which has
been subject to misuse, negligence or accident beyond the company recommended machine rated capacity.
WARRANTY CLAIM
To submit a warranty claim, a claim must be filed with BLUE DIAMOND®ATTACHMENTS before work is performed.
The BLUE DIAMOND® PRODUCT SUPPORT TEAM will advise repairs and applicable parts exchanges. Tampering
with the failed part may void the warranty. This warranty does not include freight or delivery charges incurred
when returning machinery for servicing. Dealer mileage, service calls, and pickup/delivery charges are the
customers’ responsibility.
EXCLUSIONS OF WARRANTY
Except as otherwise expressly stated herein, BLUE DIAMOND®ATTACHMENTS makes no representation or
warranty of any kind, expressed or implied, AND MAKES NO WARRANTY OF MERCHANTABILITY IN RESPECT
TO ITS MACHINERY AND/OR ATTACHMENTS ARE FIT FOR ANY PARTICULAR PURPOSE. BLUE DIAMOND®
ATTACHMENTS shall not be liable for incidental or consequential damages for any breach or warranty, including
but not limited to inconvenience, rental of replacement equipment, loss of profits or other commercial loss.
Upon purchase, the buyer assumes all liability for all personal injury and property resulting from the handling,
possession, or use of the goods by the buyer.
No agent, employee, or representative of BLUE DIAMOND®ATTACHMENTS has any authority to bind BLUE
DIAMOND®ATTACHMENTS to any armation, representation, or warranty concerning its machinery and/or
attachments except as specifically set forth herein.
This warranty policy supersedes any previous documents.
NOTE: Blue Diamond®Attachments is a trademark of BLUE DIAMOND®ATTACHMENTS
Warranty

QUALITY | DEPENDABILITY | INTEGRITY
Blue Diamond® Attachments
4512 Anderson Road, Knoxville, TN 37918
888-376-7027