Blue Diamond MOLDBOARD PLOW 440012 User manual
Operation and Maintenance Manual
MOLDBOARD PLOW
Register your
WARRANTY
within 30 days
of purchase
888-376-7027 | BlueDiamondAttachments.com
440012 - 14” MOLDBOARD PLOW, SINGLE BOTTOM
440010 - 16” MOLDBOARD PLOW, SINGLE BOTTOM
440015 - 16” MOLDBOARD PLOW, DOUBLE BOTTOM
Blue Diamond® Attachments
1
Introduction
Owner Information
Thank you for your decision to purchase a
Blue Diamond Moldboard Plow To ensure
maximum performance of your equipment, it is
mandatory that you thoroughly study the
Operator’s Manual and follow the
recommendations. Proper operation and
maintenance are essential to maximize equipment
life and prevent personal injury.
Operate and maintain this equipment in a safe
manner and in accordance with all applicable local,
state, and federal codes, regulations and /or laws.
Follow all on-product labeling and instructions.
Make sure that all personnel have read this
Operator’s Manual and thoroughly understand safe
and correct operating, installation and maintenance
procedures.
Blue Diamond is continually working to improve its
products. Blue Diamond reserves the right to make
any improvements or changes as deemed practical
and possible without incurring any responsibility or
obligation to make any changes or additions to
equipment sold previously.
Although great care has been taken to ensure the
accuracy of this publication, Blue Diamond makes
no warranty or guarantee of any kind, written or
expressed, implied or otherwise with regard to the
information contained within this manual. Blue
Diamond assumes no responsibility for any errors
that may appear in this manual and shall not be
liable under any circumstances for incidental,
consequential or punitive damages in connection
with, or arising from the use of this manual.
Keep this manual available for frequent reference.
All new operators or owners must review the
manual before using the equipment and annually
thereafter. Contact your Blue Diamond
Attachments Dealer for assistance, information, or
additional copies of the manual. Contact
www.bluediamondattachments.com or call
888-376-7027 for a complete list of dealers in
your area.
Serial Number Location
Please record attachment information in the space
provided for future reference.
The serial number plate (is located on right
side, just forward of the attachment mounting
plate.
Always use your serial number when requesting
information or when ordering parts.
NOTE: The directions left, right, front and rear, as
mentioned throughout this manual, are as
viewed from the operator’s position.
Model Number:
Serial Number:
Dealer Name:
Dealer Number:
Date of Purchase:
Blue Diamond® Attachments
2
4
4
6
4
6
6
22
22
22
22
23
4
5
Blue Diamond® Attachments
3
1. INTRODUCTION
1.1 Welcome
Congratulations on your choice of a Blue Diamond®
Attachments moldboard plow. This equipment has
been designed and manufactured to meet the needs
of discerning users. The Blue Diamond® moldboard
plow is designed to turn over and aerate the soil from
primary tillage and to bury residue.
Many features incorporated into this moldboard plow
are the result of suggestions made by customers like
you. Read this manual carefully to learn how to
operate the moldboard plow safely and how to adjust
it to provide maximum plowing efficiency.
By following the operating instructions, in conjunction
with a good maintenance program, your Blue
Diamond® Attachments disc harrow will provide many
years of trouble-free service.
This manual covers Blue Diamond®
Attachments moldboard plow models:
Model Description
440012 14" Single Bottom
440010 16" Single Bottom
440015 16" Double Bottom
1.2 Safe Operation
Safe, effi cient, and trouble-free operation of your disc
harrow requires that you, and anyone else who will be
using or maintaining the unit, read and understand the
information contained within the Operation and Parts
Manual.
Use this manual for reference and for new operators or
owners.
WARNING
Read And Understand Manual
To prevent personal injury or even death, be
sure you read and understand all of the
instructions in this manual and other related OEM
equipment manuals! The moldboard plow if not
used and maintained properly, can be dangerous to
users unfamiliar with its operation. Do not allow
operating, maintaining, adjusting, or cleaning of
this disc harrow until the user has read this
manual and has developed a thorough
understanding of the safety precautions and
functions of the unit.
This moldboard plow is designed for the
specific purpose of plowing soil DO NOT
modify or use this moldboard plow for any
application other than that for which it was
designed.
Moldboard plows maintained or operated
improperly, or by untrained personnel, can be
dangerous; exposing the user and/or bystanders
to possible serious injury or death.
Blue Diamond® Attachments
4
The moldboard plow is designed to h.m over soil
fot
primary
tillage.
Many features incorporated into this moldboard plow are the
result of suggestions made by customers
like you. Read this manual carefully to learn how to operate the
moldboard plow safely and how to adjust it to provide maximum
plowing efficiency.
By following
the
operating instructions in conjunction
with a good maintenance program, your moldboard plow will
provide many years of trouble-free service.
This manual covers Blue Diamond® moldboard plow models:
Safe, efficient. and tr ouble-free operation of your moldboard plow
requires that you, and anyone else who will be using or
maintaining the unit, read and understand the information
contained within this Manual
Use this manual for reference and for new operators Of owners.
§
WARNING
� Read And Understand Manual
440012
440010
440015
14" MOLDBOARD PLOW SINGLE BOTTOM
16" MOLDBOARD PLOW SINGLE BOTTOM
16" MOLDBOARD PLOW DOUBLE BOTTOM
Blue Diamond® Attachments
5
Ml
440012 440010
I
440015
2.4 Intended Usage
Do not use this moldboard plow for any other purpose than
its intended use of plowing soil.
2.S Operator Orientation
The directions left, right. front. and rear, as mentioned
throughout this manual. are as seen from the tractor
operator"s seal and facing in the direction of travel
Blue Diamond® Attachments
6
2. Safety
2.1 General
Safety of the operator and bystanders is one of the
main concerns in designing and developing a new
piece of equipment. Designers and manufacturers
build in as many safety features as possible. However,
every year many accidents occur which could have
been avoided by a few seconds of thought and a more
careful approach to handling the equipment.
Most work-related accidents are caused by failure to
observe basic safety rules or precautions. An accident
can often be avoided by recognizing potentially
hazardous situations before an accident occurs. As
you assemble, operate, or maintain the disc harrow
(unit), you must be alert to potential hazards. You
should also have the necessary training, skills,
and tools to perform any assembly or maintenance
procedures.
Improper operation and maintenance of this unit could
result in a dangerous situation that could cause injury
or death.
If you have any questions not answered in this manual,
require additional copies, or the manual is damaged,
please contact your dealer or:
Blue Diamond® Attachments
WARNING
Do not assemble, operate, or maintain the
unit until you read and understand the
information contained in this manual.
Safety precautions and warnings are provided
in this manual. If these hazard warnings are
not heeded, bodily injury or death could occur
to you or to other persons.
Blue Diamond® Attachments cannot anticipate every
possible circumstance that might involve a potential
hazard. The warnings in this manual are, therefore,
not all-inclusive. If a method of assembly, operation, or
maintenance not specifically recommended by us is
used, you must satisfy yourself that it is safe for you
and for others. You should also ensure that the unit
will not be damaged or be made unsafe by the
methods that you choose.
The information, specifications, and illustrations in this
manual are based on the information that was
available at the time this material was written and can
change at any time without notice.
2.2 Safety Alert Symbols
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
This manual contains DANGERS, SAFETY
INSTRUCTIONS, CAUTIONS, IMPORTANT NOTICES,
and NOTES which must be followed to prevent
the possibility of improper service, damage to the
equipment, personal injury, or death. The following key
words call the readers’ attention to potential hazards.
Hazards are identifi ed by the “Safety Alert Symbol”
and followed by a signal word such as “DANGER”,
“WARNING”, or “CAUTION”.
DANGER
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme
situations.
WARNING
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE
Indicates that equipment or property damage can result
if instructions are not followed.
SAFETY
INSTRUCTIONS
Safety instructions (or equivalent) signs indicate
specifi c safety-related instructions or procedures.
Note: Contains additional information important to a
procedure.
Blue Diamond® Attachments
7
2.3 Safety Icon
Nomenclature
Pictorial icons signal a type of
hazard and warn of personal
protection issues, prohibited
actions, and hazard avoidance.
2.3.1 Personal Protection/
Important Information
Read the manual
Maintenance procedure
N
I
NG
AR Damaged hazard label
Eye protection
Fire extinguisher
First aid kit
Hand protection
Head protection
Hearing protection
Inspect equipment
OEM
OEM
OEM parts only
Protective shoes
Remove key
Set parking brake
STOP Stop engine
THINK
SAFETY! Think safety
Transmission in park
Use proper support
Use proper tools
Use two people when
lifting heavy objects
Visibility
Rollover protection
Wear seat belt
Weight rating
2.3.2 Prohibited Actions
Do not alter or modify
Use proper tools
Do not weld
No alcohol
No drugs
No smoking
No young children
No riders
2.3.3 Hazard Avoidance
Crush
hazard
Crush hazard (chock
wheels)
Crush hazard (foot)
Defective or broken part
Fall hazard
Fire hazard
Disc blade contact
hazard (hand)
Disc blade contact
hazard (foot)
Lifting hazard
Cutting hazard
Pinch point hazard
Rollover protection
Safety alert symbol
Sharp object hazard
Slipping injury
Tripping injury
Blue Diamond® Attachments
8
2.4 General Safety Instructions
The owner/operator is responsible for the SAFE use
and maintenance of the disc harrow. Make sure
anyone who is operating, maintaining, or working
around the disc harrow is familiar with the operating
and maintenance procedures and related SAFETY
information contained in this manual. This manual will
take you step-by-step through your working day and
alerts you to all good safety practices that should be
used while using the moldboard plow.
In addition to the design features of the moldboard
plow, including safety signs, accident prevention is
dependent upon the awareness, concern, prudence,
and proper training of the people involved in the
operation, maintenance, and storage of the disc
harrow.
In addition to this safety section, refer also to safety
messages and instructions in each of the appropriate
sections of the disc harrow manual.
These general safety instructions apply to the overall
use and maintenance of the disc harrow.
More specifi c instructions on safety are found in the
operation, maintenance, and storage sections of this
manual. Refer to these sections before performing
any of these tasks.
WARNING
Failure to comply with the following safety
instructions can and will result in serious injury and
possibly even death if they are not understood and
followed.
Stay Clear
Clear the area of people, especially small
children, before using the moldboard plow.
Under
no circumstances should young children be allowed
to work with or around the moldboard plow.
Impaired User Hazard
Do not attempt to assemble, operate, or
maintain this moldboard plow under
the
infl uence of drugs or alcohol. Consult your doctor
before using this disc harrow while taking
prescription medications.
Crush Hazard
Do not allow anyone to ride on the
tractor or the moldboard plow. Falling
or
crushing hazards can result in severe injuries or
death. Falling Hazard
Do not allow riders on the hitch,
tractor, or moldboard plow at any
time.
Falling can result in severe injuries or death.
WARNING
Provide User with Literature
moldboard plow owners must provide
operator instructions to anyone
using the moldboard plow before use, and at
least annually thereafter. Refer to “2.6 OSHA
Training Requirements” on page 12.
Damaged Parts Hazard
Do not use the moldboard plow if any
parts are damaged. If the moldboard
plow has a defect,
immediately stop using it and remedy the problem
before continuing.
Blue Diamond® Attachments
9
CAUTION
The following safety instructions are provided to
help prevent potential injury. Not following these
instructions may result in minor to moderate injury.
Personal Protection Equipment
When using this moldboard plow, wear
appropriate personal protective equipment.
This list may include, but is not limited to:
• Protective shoes with slip resistant soles
• Protective goggles, glasses, or face shield
• Protective clothing and gloves
• Safety vest (when operating near roads)
• Hearing protection
Hearing Loss
Prolonged Exposure To Loud Noise May
Cause Permanent Hearing Loss!
Working environments with noise-producing
equipment can cause partial to permanent hearing
loss. We recommend using hearing protection any
time noise levels exceed 80 decibels (dB). Noise
levels over 85 dB, on a long-term basis, can cause
severe hearing loss. Noise levels over 90 dB over a
period of time can cause permanent and even total
hearing loss.
Hearing loss from loud noise is cumulative over a
lifetime without hope of natural recovery.
Crush Hazard
The tractor should be equipped with
a Roll Over Protective Structure
(ROPS) and a seat belt. A crushing hazard can occur
if the driver is ejected from the seat while the tractor
is in motion. Fasten the seat belt whenever the
tractor is moving.
SAFETY
INSTRUCTIONS
The following safety instructions are provided to
help prevent injury or limit equipment damage.
First Aid Kit
Have a fi rst aid kit available for use should
the need arise and know how to use it.
Fire Extinguisher
Have a fi re extinguisher available for use
should the need arise and know how to use it.
THINK
SAFETY! Think SAFETY! Work SAFELY!
2.5 Training
Anyone who will be using and/or maintaining the
moldboard plow must read, clearly understand, and
follow
ALL safety, operation, and maintenance information
presented in this manual and other related OEM
manuals.
If you do not understand any information in this
manual, see your dealer or contact Blue Diamond®
Attachments before proceeding.
Do not use or allow anyone else to use this moldboard
plow until all information has been reviewed. Annually
review this manual before the season start-up.
Make periodic reviews of SAFETY and OPERATION of
the disc harrow a standard practice. An untrained
operator is not qualifi ed to use this disc harrow.
2.6 OSHA Training Requirements
The following training requirements have been taken
from Title 29, Code of Federal Regulations Part
1928.57 (a) (6). www.osha.gov.
Operator instructions. At the time of initial assignment
and at least annually thereafter, the employer shall
instruct every employee who operates an agricultural
tractor and implements in the safe operating practices
and servicing of equipment with which they are or will
be involved, and of any other practices dictated by the
work environment.
Blue Diamond® Attachments
10
2.7 Federal Laws and Regulations
IMPORTANT FEDERAL LAWS AND REGULATIONS
CONCERNING EMPLOYERS, EMPLOYEES AND OPERATORS
This section is intended to explain in broad terms the concept and eff ect of the following federal laws and
regulations. It is not intended as a legal interpretation of the laws and should not be considered as such.
U.S. PUBLIC LAW 91-596 (The Williams-Steiger Occupational Safety and Health Act of 1970) OSHA
This Act Seeks:
“ ... to assure so far as possible every working man and woman in the nation safe and healthful working conditions and to
preserve our human resources ... “
DUTIES
Sec. 5(a) Each Employer -
(1) shall furnish to each of its employees employment and a place of employment which are free from
recognized hazards that are causing or are likely to cause death or serious physical harm to its
employees.
(2) shall comply with occupational safety and health standards promulgated under this Act.
(b) Each employee shall comply with occupational safety and health standards
and all rules, regulations, and orders issued pursuant to this Act which are
applicable to his or her own actions and conduct.
OSHA Regulations
Current OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter, the
employer shall instruct every employee in the safe operation and servicing of all equipment with which the
employee is, or will be involved.” These will include (but are not limited to) instructions to:
Keep all guards in place when the machine is in operation;
Permit no riders on equipment;
Stop engine, disconnect the power source, and wait for all machine movement to stop before servicing,
adjusting, cleaning, or unclogging the equipment, except where the machine must be running to be
properly serviced or maintained, in which case the employer shall instruct employees as to all steps and
procedures which are necessary to safely service or maintain equipment.
Make sure no one is within 300 feet of machinery before starting the engine, engaging power,
or operating the machine.
EMPLOYEE TRACTOR OPERATING INSTRUCTIONS:
1. Securely fasten your seat belt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going, especially at row ends, on roads, and around trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly - no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by tractor manufacturers.
9. When tractor is stopped, set brakes securely and use park lock if available.
Child Labor Under 16 Years Old
Some regulations specify that no one under the age of 16 may operate power machinery. It is your responsibility to
know what these regulations are in your own area or situation. (Refer to U.S. Dept. of Labor, Employment Standard
Administration, Wage & Home Division, Child Labor Bulletin #102).
Blue Diamond® Attachments
11
2.9 Operation Safety
Refer to “5.1 Operating Safety” on page 18 for safety
moldboard plow. All applicable safety
recommendations in other sections should also be
followed.
2.10 Transporting Safety
Refer to “6.1 Transporting Safety (Road)” on page 24
for safety recommendations related to transporting the
disc harrow. All applicable safety recommendations in
other sections should also be followed.
2.11 Storage Safety
Refer to “7.1 Storage Safety” on page 25 for safety
recommendations related to storing the moldboard
plow. All applicable safety recommendations in other
sections should also be followed.
2.12 Maintenance Safety
Refer to “8.1 Maintenance Safety” on page 26 for
safety recommendations related to maintaining the
moldboard plow. All applicable safety
recommendations in other sections should also be
followed.
Blue Diamond® Attachments
12
4. Nomenclature
1
BBra
S
' f;
-
7
,
10 T I 3
1
Blue Diamond® Attachments
13
5. Operation
® ®@ ward
A
S
�
Blue Diamond® Attachments
14
,.
«,
i
or
�
Blue Diamond® Attachments
15
S4 3-Polnt Hitch
7
A
Blue Diamond® Attachments
16
to
·u�
Blue Diamond® Attachments
17
4.
Blue Diamond® Attachments
18
at
t
Blue Diamond® Attachments
19
i
A
Blue Diamond® Attachments
20
This manual suits for next models
2
Table of contents
Other Blue Diamond Farm Equipment manuals
Blue Diamond
Blue Diamond Severe Duty 3 Series User manual
Blue Diamond
Blue Diamond 127006 User manual
Blue Diamond
Blue Diamond POWER RAKE SD 3 Series User manual
Blue Diamond
Blue Diamond PICKUP BROOM 2 Series User manual
Blue Diamond
Blue Diamond POWER RAKE User manual
Blue Diamond
Blue Diamond HD 2 Series User manual
Blue Diamond
Blue Diamond TRENCGER User manual
Blue Diamond
Blue Diamond Extreme Duty 2 Series User manual
Blue Diamond
Blue Diamond Extreme Duty Root Grapple User manual
Blue Diamond
Blue Diamond Heavy Duty Root Grapple User manual
Blue Diamond
Blue Diamond Mini Series User manual
Blue Diamond
Blue Diamond Mini Series User manual
Blue Diamond
Blue Diamond MINI V-BLADE User manual
Blue Diamond
Blue Diamond 42 Severe Duty Series 2 User manual
Blue Diamond
Blue Diamond Power Rake Heavy Duty 2 Series User manual
Blue Diamond
Blue Diamond Mini Pickup Broom User manual
Blue Diamond
Blue Diamond 429015 User manual
Blue Diamond
Blue Diamond Drum Mulcher User manual
Blue Diamond
Blue Diamond 103015 User manual
Popular Farm Equipment manuals by other brands
BIL
BIL Skoots SK5000 Operating and maintenance instructions
Tufline
Tufline PRC Series Operator's manual
Kverneland
Kverneland Vicon Andex 724 operating manual
Vicon
Vicon EXTRA 832 R Pro Assembly instructions
Boumatic
Boumatic HD2 Rapid Exit Operator's manual
BEEHIVE
BEEHIVE CE MVS Installation, Operation Maintenance & Safety Instructions
New Holland
New Holland 1037 Service manual
Vaderstad
Vaderstad Spirit 600S Series quick start
Champion
Champion CLASSIC Series Operating instructions and service manual
AMVAC
AMVAC SmartBox Parts and Operator's Manual
SEEDMASTER
SEEDMASTER ULTRA SR Operator's manual
Kongskilde
Kongskilde GXS 9005 Operator's manual