bObi Xpress Instruction Manual
x 4
ca. 1 m
1. 2.
bobi xpress
Remove the protective
plastic on the back.
Fasten the letterbox to the wall
3. 4. 5.
Remove the
protective plastic from
the access door
Place the lock. nd fasten it with the clip
INST LLING INSTRUCTION 1/2
32
34
21
~1 m
40
22
5
14
22
To fasten the letter box to a wood wall
you need a screwdriver
and a tape measure.
Fastening screws
(for wood) are included
Extra anchors and
a drill is needed if the wall is made of
brick, stone, etc.
If you are uncertain about the corrrect
placement please contact your local
postoffice prior the installation.
The height of the aperture is
recommended to be ca. 1 m
x 1
x 1
x 2
x 4
x 1
In the package:
Measures in cm:
48
x 2
x 1 x 1
bobi xpress
Remove the rest of the protective plastics
6a. 8.
123 bcdefg
60 mm
15 mm
6b. 7.
Write the name ... or print it Place the nameplate
into opening....
... and fasten it
INST LLING INSTRUCTION 2/2
9.
Place on the bottom Ribbed Floor mat.
© 2018
x 2
Place the rubber bumbers
10.
11.
Write down and save the key code!
Ready.
