Bobrick CompacDryer B-710 Owner's manual

CompacDryerTM B-710 Dryer
Troubleshooting and Information Guide
Effective 6/1/19
All Bobrick dryers require cleaning every 6 months to ensure that
they function effectively. Please note that failing to clean the dryer
may result in malfunction and can void the warranty.
(Refer to page 7 of the Dryer Troubleshooting and Information Guide for Routine Maintenance Instructions)
www.bobrick.com
BOBRICK DOMESTIC
Email: [email protected]
Corporate Ofce - Los Angeles - Bobrick Washroom Equipment
6901 Tujunga Avenue, North Hollywood, California 91605-6213
Customer Service: 818.982.9600, Fax: [phone]
New York - Bobrick Washroom Equipment, Inc.
200 Commerce Drive, Clifton Park, New York 12065-1350
Customer Service: 518.877.7444, Fax: [phone]
Canada - Bobrick Washroom Equipment Company
45 Rolark Drive, Scarborough, Ontario M1R 3B1
Customer Service: Eastern Canada: 877.423.6555, Fax: [phone]
Western Canada: 877.423.6444, Fax: [phone]
BOBRICK INTERNATIONAL
Email: [email protected]
Corporate Ofce - Bobrick Washroom Equipment, Inc.
6901 Tujunga Avenue,, North Hollywood, California 91605-6213 USA
Customer Service: +1 818.764.1000, Fax: [phone];
United Kingdom Bobrick Washroom Equipment Limited
Phone: [phone], Fax: [phone]; Email: [email protected]
Germany Phone: [phone]; Email: [email protected]
Australia Bobrick Washroom Equipment Pty. Ltd.
Phone: [phone], Fax: [phone]; Email: [email protected]

CompacDryerTM B-710 Dryer
Contents Page
Instructions for Using the Dryer Guide ...............................................3
Sample Dryer Service Information Sheet .............................................4
Date Code Information ...........................................................5
Routine Maintenance Instructions ...................................................6
Information and Troubleshooting ....................................................7
Replacement Instructions .........................................................8
Schematic Diagram ..............................................................9
Limited Warranty ................................................................10

Instructions For Using The Dryer Guide
• Signs for your safety: General mandatory sign (to be
accompanied where necessary by
another sign)
Danger: Electricity
• PleasefillouttheDryerServiceInformationSheetcompletely.Ifasectionisnotnecessary/available
insert N/A in the space.
•If the faulty dryer has been installed for 2 months or less, then replace complete dryer and return
faulty unit to the nearest Bobrick Customer Service Department.
•When you receive a call concerning a dryer problem inform, the customer/end user to clean the
dryer and check the motor brushes before going on with diagnosing the problem. Fax them the
cleaning instructions from the guide. If the dryer still does not function after cleaning,
thencontinuefillingouttheDryerServiceInformationSheet.
•Inform the customer/end user that the malfunctioning/replaced parts must be returned to the Bobrick
Customer Service Department or a charge will be made for replacement parts.

Dryer Service Information Sheet
Distributor/Rep/End-User Name: Bobrick’s best
Address: 12345 Your Street, Suite 100
City: Toon Town State: Your State Zip code: 98765
Job Name: Fantasy Lane Job Location: My Town
Contact Name: Jessica Rabbit Telephone: [phone] Fax: [phone]
Email: [email protected] Account #: 99999 Sales order #: 246810
Invoice #:35791 Invoice Date: 03/03/20
Dryer Model Information:
Automatic Dryer: __P__TouchButton Dryer: (check one)
Dryer: __P_ Dryer: _____ (check one)
Dryer model #/voltage: 700 115V
Quantity defective: 1 Quantity on job: 2 Date of installation: 06/03/20
Date code (as seen on bottom edge of cover on dryer UL label. For example: 04A): ________________________
Dryer Information:
When did dryer problems rst occur from date of installation?
(Circle one) Upon 2+ Out of
Installation Months Warranty
If dryer problem occurred within two months of installation, REPLACE dryer and return faulty dryer.
Does the dryer in any way function now? No (Yes or No)
Has the dryer been cleaned in the past 6 months? No (Yes or No). If No, send a cleaning sheet and await outcome.
Full description of fault: Unit would not start upon installation.
Reference to Diagnostic Sheets:
Problem and possible solution: Faulty controller
Problem number(s) (as seen in left margin on diagnostic sheet): # 1 F
Repair kit/parts required (if dryer needs to be returned write RETURN): Return
Part number(s) for replacements: Complete Unit Replaced on SO #: ________________
ANY DEFECTIVE PARTS MUST ACCOMPANY THIS COMPLETED SHEET TO BOBRICK’S SERVICE DEPARTMENT.
Information sheet completed by:Your Name Completion Date:6/6/20
Branch/Rep Firm: _________________________________________________________
Form No. CSD-1196 ST Rev. 4/19 Bobrick Washroom Equipment, Inc. Printed in U.S.A.
0–2
Months

Date Code Information
The date code on all Bobrick Dryers is found on the upper left corner of the rating label and on the
serial number label.
The date code will contain two digits and one letter.
The digits designate the week and the letter designates the year.
Example: 30Z week thirty, year 2000.
All digits and letters are in ascending order.
Weeks are numbered from 1 to 52 for each year.
Rating Label
Serial Number Label
Date code and
serial number
V= 2019
U = 2018
T = 2017
S = 2016
R = 2015
P = 2014
N = 2013
M = 2012
L = 2011
K = 2010
J = 2009
H = 2008
G = 2007
F = 2006
E = 2005
D = 2004
C = 2003
B = 2002
A = 2001
Z = 2000
Y = 1999
W = 1997
X = 1998
V = 1996
U = 1995
T = 1994
S = 1993
R = 1992
P = 1991
N = 1990
M = 1989

Routine Maintenance Instructions
• All Bobrick Dryers require cleaning every 6 months to ensure that they function effectively. Please
note that failing to clean the dryer may result in malfunction and can void the warranty.
• If the dryer is installed in an area prone to dust and dirt this cleaning procedure should be carried
out more frequently.
• Check the length of motor brushes, where applicable, when performing the cleaning procedure.
Cleaning Instructions:
a) The Exterior of Cover
Should be cleaned with a damp cloth, DO NOT use aggressive cleaners or solvents as they may
permanently damage the surface.
Bobrick dryers are drip proof (IP21 or better, see rating label). DO NOT spray with liquids to an
extent that they could enter the unit.
b) The Interior
Having turned off all power to the dryer, remove the cover.
Using a small brush or vacuum, carefully clean out the build up of dust and lint.
Check the length of the motor brushes. If less than ½'' replace. Check that motor brushes are i
installed correctly and that brushes are worn evenly.
Replace the cover.
Turn the power back on.
Warning
Risk of electric
shock
Disconnect power
supply before
removing cover

Information and Troubleshooting for the B-710 CompacDryerTM
For complete set of Installation Instructions refer to form No. 710-69
Information about the Dryer:
• Model B-710 CompacDryerTM is not designed for vandal-prone installations. For vandal-prone
installations use Bobrick AirCraft®dryerswithcast-iron,vitreousenamelnishedcovers.
• Only the cover and the electronic controller are available for replacement.
Product Types:
B-710 Series B
B-710 Series A
Electrical Characteristics:
115V, 15A, 1725W, 60 HZ, cULus listed.
220-240V, 7A, 1500-1700W, 50/60Hz, VDE approved, CE marked.
Removal of Cover:
Remove three screws, one from each side
and one from the bottom of the dryer. Pull
bottom of the cover away from the mounting base.
If a fault occurs with the dryer:
1. Check that the electrical supply is OK.
2. Check that the circuit breaker is switched on.
3. Check that sensor is clean and not obstructed.
Replacement Parts:
710-250 Series B cover 115V
710E-150 Series A cover 220-240V
710-360 Controller 115V
710-361 Controller 220-240V
Warning
Risk of electric
shock
Disconnect power
supply before
removing cover

Replacement Instructions for B-710 CompacDryerTM Cover
Warning
Risk of electric
shock
Disconnect power
supply before
removing cover
To Remove Existing Cover
1. Remove the (3) Phillips-head screws from
the cover, (1) from each side and (1) from
the bottom face of the dryer. See Fig. 1.
2. Pull the bottom of the cover outward and
slightly downward, then rotate upward to
disengage the (2) tabs from the slots at the
base. See Fig. 2.
To Install New Cover
1. Slide cover onto base plate making sure that
the bottom outlet aperture engages in the
sides of the outlet grille.
2. Push the top of the cover forward until the
(2) tabs snap into the slots in the base.
See Fig. 3.
3. Check that the cover is a close fi t to the
base, then replace the (3) screws.
4. Reconnect electrical supply and test with
normal hand drying procedure, allowing 10
seconds for the sensor to stabilize.
Fig 1
Fig 2
Fig 3

Schematic Diagram
220-240V Dryer
Schematic Diagram
115V Dryer

Limited Warranty
The Bobrick B-710 CompacDryerTM are warranted to the original owner of the installed unit for one year
from date of original installation against defects in factory workmanship or material under normal use
and service*.
This warranty is limited to repair or exchange of defective parts at the option of Bobrick.
THIS WARRANTY DOES NOT COVER ACCIDENTAL DAMAGE, IMPROPER
HANDLING OR INSTALLATION, OR REPAIRS MADE BY UNAUTHORIZED
PERSONS, AND SPECIFICALLY EXCLUDES CLAIMS FOR INDIRECT,
ACCIDENTAL OR CONSEQUENTIAL DAMAGES TO PROPERTY. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE SAME DURATION OF THE ABOVE WARRANTY.
Some states do not allow the exclusion of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Some states do not allow limitations on how long an implied
warranty lasts,sotheabovelimitationmaynotapplytoyou.Thiswarrantygivesyouspeci iclegal
rights,andyou may also have other rights which vary from state to state.
* Normal service constitutes performing the following preventive maintenance procedures at
six-month intervals:
Clean any lint, dust or grease from air-intake grille and air-outlet grille.
Labor costs for preventive maintenance shall be at owner’s expense.
For repair or exchange of defective part, send the part together with installation date and serial number
to Bobrick.