Bodypoint PC202 Guide

en
Joystick Mounting Kits
INSTALLATION AND USER’S INSTRUCTIONS
These instructions provide important infor-
mation for the safe use and maintenance
of all Bodypoint Joystick Mounting Kits.
Give these instructions to the user or their
caregiver and review them to ensure that
they are understood.
CAUTION! Turn off wheelchairs electrical
system before installation.
WARRANTY: This product carries a limited
lifetime warranty against defects in work-
manship and materials arising under normal
use by the original consumer. Contact your
supplier or Bodypoint for warranty claims.
BPI031-en 2018.14
PC033
PC024
PACKAGE CONTENTS
Package may contain one or
more of the following:
• Joystick Mounting Clamp
• Tri-Lock™ Rotating Shaft
• Midline Arm
• Joystick Mounting Adapter
• Quick Release Lever (Op-
tional) or a complete joystick
Mounting Kit. Art PC202-,
PC205-, PC206-, PC207-
ART NOS. PC202, PC205, PC206 & PC207
PC010 PC011
PC045 PC046 PC047
PC032PC031
PC042

en
Tri-Lock Rotating Shaft is compatible with right or left
side mounting. Rotate Shaft in Mounting Clamp to
ensure correct positions of rotation.
The Flip-stop allows conversion from non-locking to
locking. 0° horizontal position becomes locked. Press
end to unlock.
TRI-LOCK™ROTATING SHAFT
JOYSTICK MOUNTING CLAMP
k
PC010
PC011
Art. No.
FA171
5mm
Joystick Mounting Clamps can be
installed on the right or left side.
Attach clamp to armrest. Position
the clamp as far forward as possi-
ble and tighten. Ø22mm
35cm (14”)
13.6kg
(30lbs) Max
0˚ Driving Position Vertical Press end to unlock Full rotation
6mm
10mm
15 Nm MAX
(132 lbf-in)
15 Nm MAX
(132 lbf-in)

en
INVACARE
Art. No. PC042
1/8”
3/8” (10mm)
1/2” (12mm)
Mark 4 MPJ+
PSR+
PSF+
PGDT PILOT PLUS
Art. No. PC045
5/32” (4mm)
PGDT R-NET & VSI
Art. No. PC046
10mm #2 Phillips#2 Phillips
#2 Phillips
Attach loose
wires with nylon ties
included.
JOYSTICK MOUNTING ADAPTERS
J-Shaped Midline
Arm allows use over a
lap tray.
NOTE: The aluminum
Midline Arm can be
cut to length using a
hacksaw.
MIDLINE ARMS
COMPACT JOYSTICKS
Art. No. PC047
#2 Phillips 10mm
2x 10-32 x 3/8”
(10mm)
4x M4 x 10mm
(3/8”)