BCWR Receiver
Mode: Infrared Frequency Modulated
Receiving Channels: Dual-Channels A & B
Carrier Frequency: Ch A: 2.0 MHz; Ch B: 2.6 MHz
Audio Frequency Response: 60 Hz -12 kHz
S/N Ratio: >90 dB
Audio Mix Output: 400 mV, unbalanced
Range (line-of-sight): Up to 30 ft.
Controls: Power On/Off (front); Ch A and Ch B Volume Controls (rear)
Connectors: 2 - IR Sensor Coaxial-type jacks (rear);
1- Ch A/B Audio Mixer output, RCA-type jack (rear)
1- AC Power input jack (rear)
Power Requirements: 16V AC, 600mA (via AC adapter)
Power Consumption: 8W
Dimensions: 10-5/8" W x 2" H x 7-3/8" D
Weight: 4 lb.
BCWBT Body-pack Transmitter
Carrier Frequency: Ch A: 2.0 MHz; Ch B: 2.6 MHz
Audio Input: Body-pack-type Omni-directional Condenser Microphone
Lavaliere/Lapel-type Omni-directional Condenser Microphone
Headset-type Uni-directional Condenser Microphone
Controls: On/Off Switch,Volume Control, Ch A/B Select Switch
Connectors: 3.5mm Locking Jack (MIC Connection); DC Input charge jack
Power Requirements: 2 AA Batteries (2.4V DC)
Optional Rechargeable Battery Pack: BCBRBP
Optional Battery Charger: BCBRA
Dimensions: 2-5/8" W x 3-7/8" H x 1-11/16" D
Weight (Transmitter): 3.6 oz.
Weight (Headset): 1.1oz.
BCWHT Handheld Microphone/Transmitter (Optional)
Carrier Frequency: Ch B: 2.6 MHz
Audio Input: Uni-directional Dynamic Cartridge Microphone
Controls: On/Off Switch
Power Requirements: 2 AA Batteries (2.4V DC)
Optional Rechargeable Battery Pack: BCHRBP
Optional Battery Charger: BCBC
Dimensions: 10-5/16" D x 2-5/16" dia.
Weight: 14 oz.
Architect &
Engineer
Specifications
Technical
Specifications
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
201-934-8500 FAX: 201-934-9832 www.bogen.com
The system shall be the Bogen Enhancer, comprised of
Bogen Model BCWR Receiver; Model BCWBT Body-
pack Transmitter with lavaliere, body-pack, and headset
microphones; lanyard; and two (2) Model BCIRS
Infrared Sensors.The unit shall have two receiving chan-
nels with carrier frequencies of 2.0 MHz (Ch.A) and 2.6
MHz (Ch. B).The unit shall have two audio output vol-
ume controls.The unit shall have an unbalanced audio
output.
The BCWBT Body-pack Transmitter shall operate on
two (2) AA batteries or on an optional rechargeable
NiMH battery pack (Model BCBRBP, sold separately).
The recharging unit for the BCWBT/BCBRBP shall be
Model BCBRA (sold separately). The BCWBT shall
weigh 3.6 ounces and measure 2-5/8" W x 3-7/8" H x
1-11/16" D.The Transmitter shall include lavaliere, body-
pack, and headset microphones; an adjustable, break-
away neck lanyard; and a belt clip.
The Enhancer system shall include two (2) BCIRS
infrared sensors. Each sensor shall include mounting
brackets and a 35-foot plenum-rated cable. The
Enhancer shall accept additional BCIRS Sensors with
the use of the BCYA adapter (sold separately).
A wireless Handheld Microphone/Transmitter will be
available separately. It shall be model BCWHT. It shall
operate on two (2) AA batteries or on an optional
rechargeable NiMH battery pack (Model BCHRBP, sold
separately). The recharging unit for the BCWHT and
BCHRBP shall be the BCBC (sold separately).
