
PXFB8091022 B809BL B809BXL
3660740010041 3660740009106 3660740008376
B809
11/01/2020
B809
S - PXFB8091022 52/17 Z87-2+ 130 mm
L - B809BL 54/17 Z87-2+ 127 mm
XL - B809BXL 57/17 Z87-2+ 130 mm
DISCREET HIGH- PERFORMANCE
FRAME MARKING
CLEANING AND STORAGE
PACKAGING AND EAN13 CODE
CHARACTERISTICS
FRAME MATERIALS TR90/Metal/Nylon
Per piece
CORRECTED BASE:
LENS MARKING
Corrected base : 4
CLEANING : The lenses should be cleaned regularly. Bollé Safety recommends only using
the B-clean lens cleaning system.
MAINTENANCE : Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microber pouch or rigid case.
STORAGE : All products must be stored in a dry and clean environment.
MODEL REFERENCES SIZE FRAME MARKING TEMPLE LENGTH
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
• Splash/droplet protection = D3
• Nuisance Dust protection = D4
• Fine Dust protection = D5
• Country of origin = Taiwan
ANSI: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
Maximum protection for glasses. Use for high speed
particles at extreme temperatures.
Bollé Safety product approval certicates to ANSI standards
will be sent on request.
bollesafety-usa.com
Bollé Safety-USA
2810 Caribou Court, Suite 160
Carlsbad, CA 92010
USA