Bon Pergola Villa 10x10 User manual

1
User Instructions
Villa Pergola motorized operation
Size: 10’x10’ (300x300 CM)
10’x13’ (300x400 CM)
13’x13’ (400x400 CM)

2

3
Content
Tools and man force ...........................................................................3
Parts List...............................................................................................4-9
Product Description..............................................................................10
Safety Instruction.................................................................................10-11
Mounting...............................................................................................12-24
Dismounting...........................................................................................25
Storage...................................................................................................25
Disposal..................................................................................................25
Attention:
Read this instruction manual carefully and completely before mounting and usage.
Keep this manual for future reference.
Dear Customer,
Congratulations and welcome to our Villa Pergola family. To enjoy your Villa Pergola for its lifetime and for
you and other’s safety, please follow the assembly instructions.
Before you start the assembly process and using the Pergola, we suggest you are best to get familiar with
this product. Make sure all parts listed up in below packing lists are delivered and intact. If you find that there
are parts missing or damaged, please do not install the pergola but contact us immediately. Do not start the
assembly process if parts are missing or defective.

4
Tools and man force
Recommended: 2 or 3 people
Additional tools:
1.Ladder 2. M10/13 open wrench supplied 3. Rubber mallet
4.Tape measure 5. 5mm hexagon wrench supplied 6. Pencil
7.Spirit level 8. Electric drill

5
Parts List
Please check all parts against the parts list before commencing construction of pergola.
SIZE：10’x10’ or 300X300CM PARTS LIST
Aluminum profile parts list:
(A1) Beam
(B1 ) Beam
(C1) Beam
(C2) Beam
(D1) Post + post connector
(D2) Post + post connector
(G) Common Louver
(H) Steering Louver
(I) Strenthen Louver
(E1) Gutter
(E2) Gutter
(F1) Gutter
(F2) Gutter
(J) Steering profile

6
Hardware and other parts:
①M8x20 countersunk screw
②50 to 40 connector
③Base plate
④Upright cover
⑤M10 screw cap
⑥M8x20 Hexagon bolt
⑦Plastic washer DAP25
⑦Locking nut
⑨Motor with motor bracket
⑩Gutter connector
⑪wall bracket
⑫Slider
⑬L bracket
⑭Cover plate
⑮M8X100 Internal anchor
⑯M8X100 Anchor
⑰Base plate caps

7
SIZE：10’x13’ or 300X400CM PARTS LIST
Aluminum profile parts list:
(A1) Beam
(B1 ) Beam
(C1) Beam
(C2) Beam
(D1) Post + post connector
(D2) Post + post connector
(G) Common Louver
(H) Steering Louver
(I) Strenthen Louver
(E1) Gutter
(E2) Gutter
(F1) Gutter
(F2) Gutter
(J) Steering profile

8
Hardware and other parts:
①M8x20 countersunk screw
②50 to 40 connector
③Base plate
④Upright cover
⑤M10 screw cap
⑥M8x20 Hexagon bolt
⑦Plastic washer DAP25
⑦Locking nut
⑨Motor with motor bracket
⑩Gutter connector
⑪wall bracket
⑫Slider
⑬L bracket
⑭Cover plate
⑮M8X100 Internal anchor
⑯M8X100 Anchor
⑰Base plate caps

9
SIZE：13’x13’ or 400X400CM PARTS LIST
Aluminum profile parts list:
(A1) Beam
(B1 ) Beam
(C1) Beam
(C2) Beam
(D1) Post + post connector
(D2) Post + post connector
(G) Common Louver
(H) Steering Louver
(I) Strenthen Louver
(E1) Gutter
(E2) Gutter
(F1) Gutter
(F2) Gutter
(J) Steering profile

10
Hardware and other parts:
①M8x20 countersunk screw
②50 to 40 connector
③Base plate
④Upright cover
⑤M10 screw cap
⑥M8x20 Hexagon bolt
⑦Plastic washer DAP25
⑦Locking nut
⑨Motor with motor bracket
⑩Gutter connector
⑪wall bracket
⑫Slider
⑬L bracket
⑭Cover plate
⑮M8X100 Internal anchor
⑯M8X100 Anchor
⑰Base plate caps

11
Product Description
Make the most of your outdoor living area with your pergola. Relax and enjoy the outdoors while being
protected from sun. The coated aluminum frame pergola is perfect for shading your garden, deck, courtyard
and swimming pool.
Important Safety Instructions
Warning: For the safety of you and other persons it is important to follow below instructions and
obey warnings.
Symbol explanation
This warning triangle calls attention to hazards that that can lead to death or to severe
injuries or which are important for the functioning of the Pergola.
This sign identifies important notes.
Safety instructions
To install this pergola technical knowledge is necessary. Do not mount this pergola
yourself but contact a professional workman for help if
you are unsure if the pergola can be mounted on the place you chose for
installation.
you do not understand the instruction manual or parts of it.
you do not have necessary tools available.
you do not have necessary technical knowledge
A minimum of three healthy adults are required to move and install the pergolaas
the product is big and heavy. Do not try to install the pergola alone. If the pergola falls,
it could cause serious injuries and damages! Contact an authorized assembler for help.
Do not install the pergola when you find damage parts are that parts are missing.
Contact your dealer.

12
Keep children and pets out of the working area during assembly and adjustments.
This product and its fixing parts are only suitable for installation on a plain
cement wall or stable brickwork. If the wall/brickwork shows cracks you have to
consult a professional.
Nobody is allowed to change the products’ design and structure without the
permission of manufacture or authorized deputy.
Please make sure that your hands are clean at the time of the assembly; otherwise you
may soil frame.
Nobody is allowed to climb onto the Pergola. Hanging anything on the Pergola is
forbidden.
Sheeting was used to protect the paint. This must be removed afterwards.
This structure is a non-permanent structure and the warranty does not cover damage
incurred under extreme weather conditions including heavy rain, high winds or if
exposed to high heat from heaters or BBQs.
Safety precautions should always be followed when assembling and using this product
to reduce the risk of personal injury and damage to equipment. Please read all
instructions before assembly and use. Never leave children unattended around/under
this pergola. Do not attempt to assemble or use the pergola in moderate or heavy wind
conditions. Always keep the pergola louver open and secure it during heavy winds or
extreme weather conditions to avoid damage to the pergola or personal injury.

13
Mounting and usage
Step 1
Attach base plate③x2 to the bottom of posts (D1 /D2),use bolts ○ 1 x 8 to attach with
hex key or electric drill.
D1, D2 posts should be installed diagonally as below.
Please make sure all posts on the same horizontal plane.

14
Step 2
According the height of ○ D1 to measure the height of ○ 11,use anchor to fasten

15
Step3
Use bolts ○ 12x4 to fasten beam ○ B1 .

16
Step 4
Insert the ○ A1 / ○ C2 into ○ D1 ,then connect ○ B1 with ○ 13 ,fasten the screws.

17
Step 5
Cover the post with ○ 4 x2,fasten the screws.

18
Step 6
Connect the ○ C1 and ○ C2 into ○ B1 with ○ 13 , fasten thescrews. Cover the beam on
both sides with ○ 14 ,fasten the screws

19
Step 7
Placed all gutter ○ E1 ,○ E2 ,○ F1 ,○ F2 in proper position as picture

20
Step 8
Fasten ○ 10 x2 gutter connector and②x2 50 to 40 connector.
Connect the female and male plugs for the LED lighting, (DC24V to DC24V) and
motor (DC24V to DC24V) and plug the power cable into local socket.
Step 9