Bonsaii C149-C User manual

= bonsaii
Paper Shredder C149-C
Instruction Manual
18-Sheet Cross-Cut Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better! Customer Service:
Contact our friendly customer service department for help first.
% : customer-care @bonsaii.com
Replacements for missing or damaged parts will be shipped
X, : 1-844-728-6917

KNOW YOUR SHREDDER
DB®6 BR@E @ Power switch(ON/OFF)
@ Control panel (Control shredder's three
status “REV” *AUTO” *BLANK”)
® Blank position ( stop working status)
@ Reverse Position (“Release the paper”)
® Auto position (under work status)
® Power light (work status in red)
@ Overload indicator light (overloading in red
with flashing)
Overheat indicator light(Overheating in red)
®© Feed opening
@ Basket handle
@ Basket
For safety reasons, shredder @ Transparent Window
will operate only if the @ Caster brake
shredder head is in correct
@ Shredder’s caster
position and used with
supplied basket.
TECHNICAL SPECIFICATIONS
Voltage 120VAC, 60Hz, 3.0A
Feeding Opening Feed Opening | 5.5x222mm
18 sheets/time
Capacity (A4 80g/m?) W) 0.22x8.74 Inches
T.6m
Shredding Speed ‘ :,',“;f“’; secondsiper paper) | S"ed Tvpe Cross cut
Basket Capacity 6.08Gallon/23L Shred Paper Size | 5 x 40mm(0.2 x 1.6 Inches)
ey | 360 % 285 x 545 mm
Product Size (LW'H) | 14747,11 22x21.46 inches) Basket type Pull out

OPERATING INSTRUCTIONS
m 1. Plug in and press the power switch “-".
| i l 2. Moving “control panel” from “blank” to “Auto
"position, Power light in red. (Feed papers,
AUTO BLANK RV
credit card, clips or staple to shred.)
(® Continuous opeation round 30 minutes.
o o e
3. When finished shredding, set to Blank position
AUTO B R and turn off the power switch "O".
o o O
i i I Jam: Please move “control panel” to “REV" position and pull out the
jammed paper
o o e
@j * Moving “control panel” from “Auto” to “REV” position for 3-5 seconds
AUTO SLANK RV staying. (If it meets a very serious jam, Please kindly repeat this
operation around 2-3 times )
O o e
Ot Oveont Pomer
Overheat (overheat in red, Power light in red, need to wait for cooling
Py down.) @ Cool down around 20 minutes
®e O o
Ot Oveont Pomer
Overload (Overloading in red with flashing, power
light in red, need to take out excess papers.)
o e @

PRODUCT MAINTENANCE
@ m Plug in and press the power switch “-".
@
i — Moving “control panel” from “blank” to “Auto ”
position, power light in red .( Feed one shredder
AUTO BLANK REV lubricant pack to shred)
o o e
® } ; . .
- Move “control panel” from Auto to “Reverse” for
— 2-3 seconds staying (don’t pull out the shredder
Pr— lubricant pack)
o o e
®
Move “control panel” from REV to AUTO to shred the shredder
lubricant pack for 3-5 seconds staying and repeat the actions for
AT SLANK RV 2-3 times till the shredder lubricant pack is fully shredded.
o o e
®
When finished shredding, set to Blank position and turn off
the power switch "O".
o o O
[A\CAUTION
* Only use the professional shredder Lubricant to maintain the shredder such as
Bonsaii shredder Lubricant 24-Pack/12-Pack .(no cleaner ,inflammable liquids ,gases
oil etc... )

TROUBLESHOOTING
Malfunction Reason Solution
Th ! it 1 Please kindly check whether you
e power plug doesn't connect | 56 the machine with related supply|
to the power supply. voltage or Plug in again correctly.
Power supply voltage is too low | Please kindly find a related supply
or no power supply. voltage to use it .
The machine is under overheating
| protection, because the machine is| Wait for the machine to cool down
Stop Working | over the continues working naturally.
capacity.
The thickness of paper is too thin. To make the paper thicker ,You can
add more papers or fold the paper.
P Reduce paper quantity with an
ggsar:::w‘?p':::fi':o:\irg' acceptable amount and place the
! : | paper into the feeding opening of
machine Max shredding quaniities.| g oo oo
Please replace the power cable with
Damage of power cable. the same parameters by professional
person or contact with our
customer service.
The basket is full. Empty the basket.
e EIEEie Please kindly contact with our
- customer service.
. Please kindly use the function of
Jam Paper jam. "Reverse" to take out the excess
paper.
.| Paper dust and other foreign Please unplug first and use soft
Keep Running objzcls SR G, < cloth to clean the foreign objects
without any cleaner or water.
Loud Noise The ;hredder is placed on an Change the location.
unsuitable place.
If the above answers can not solve your problems, please kindly contact with our
customer service team via email [email protected]