BORK S800 User manual

OPERATING MANUAL
JUICER
S800

2 3
DESCRIPTIONDESCRIPTION
2 3
FINE MESH FILTER WITH TITANIUM
NITRIDE BLADES COATING
Thanks to the fine mesh filter with unmatched filtering properties, you can
get the purest juice and the driest pulp. The titanium nitride coating enhances
the resistance of blades to wear, oxidation and corrosion to make them more
durable and ensure the best results.
1,500 W POWER, 2 EXTRACTION SPEEDS
1,500W professional motor and two extraction speeds for soft and hard fruit
from 6,500 to 13,000 rotations per minute help to maximize juice extraction
of fruit, vegetables, and berries.

4 5
CONFIGURATIONDESCRIPTION
4
SAFETY AND RELIABILITY
Emergency braking when the lock cover is opened, overheating protection and
smooth motor start – all these contribute to professional operational safety
of the juicer. The cast metal casing and forced cooling give additional wear
protection to the motor.
Feed chute
Lid block
Pulp container
Power button
Juicer’s lid
Filter cup
Base with motor
Speed control
Overloading protection button
Pusher for products

6 7
CONFIGURATIONCONFIGURATION
Brush to clean the filter
Juice jar with froth separator
Fine mesh filter with titanium nitride blades coating
NOZZLE FOR EXTRACTION IN A GLASS
You can use any dish instead of the juice jar.
The nozzle for extraction in a glass will prevent
splashing during extraction. It also has the “drop
stop” function. For that purpose turn the nozzle
with its nose up.

8 9
ASSEMBLYASSEMBLY
BEFORE THE FIRST USE
Unpack the juicer. Remove all packing materials,
squibs and labels from the juicer’s casing and base.
Before the first use wash all removable parts
of the juicer with running water and wipe the
base with the motor with a wet napkin to remove
all mechanical parts and dust, which could get
inside the juicer in the course of manufacture and
transportation. • Set the filter cup on the base with the motor. • Set the filter by aligning arrows on the filter with
arrows on the filter drive.
Make sure that the filter is safely fixed inside the
filter cup. Set the juicer’s lid on the filter cup.
• Set the juicer’s lid on the filter cup. • Lift the lid block in the vertical position until you
hear a click.
• Insert the pusher for products into the feed
chute.

10 11
ASSEMBLYASSEMBLY
• Set the pulp container slightly declining it.
To minimize cleaning put a plastic bag inside the
pulp container in advance.
• Place the juice jar under the juicer’s nose. Put
the lid with the separator on the jar to prevent
splashes.
• Plug in the appliance.
• Switch on the necessary extraction speed. The
juicer will start operation.
Use low speed for soft products and high speed for
solid products.
Extract juice slightly pressing the products with the
pusher.
Apricots (without kernels) Low
Pineapple High
Oranges (peeled) Low
Watermelon Low
Broccoli Low
Brussels sprouts High
Grapes (without kernels) Low
Pears (solid) High
Pears (soft) Low
Melons Low
Cabbage Low
Kiwi Low
Strawberry Low
Mango Low
Carrots High
Cucumber Low
Peaches (without kernels) Low
Beet root High
Celery High
Plums (without kernels) Low
Tomatoes Low
Pumpkin High
Cauliflower Low
Blackberry Low
Apples High
SPEED SELECTION TABLE

12 13
ASSEMBLYASSEMBLY
MOTOR OVERLOAD PROTECTION
The juicer is fit with the automatic safety device,
which protects the motor from breakdown in case
of overheating during operation with maximum
load.
In case of the motor is overheated, the protection
will automatically switch off the juicer.
In this case unplug the juicer and wait until the
motor cools down. Then press the automatic
protection button located on the juicer’s base.
The juicer will be again ready for use.
DISMANTLING
• Switch off the juicer by pressing the Power button
and unplug the appliance.
• Remove the pulp container holding it by the
handle.
• Pull the lid block holding the juicer and put it
down.

14 15
CLEANINGASSEMBLY
• Take off the juicer’s lid. • To remove the filter slightly turn the juicer’s nose
to the left.
Do not touch sharp blades in the filter’s base.
• Take off the filter cup from the base.
Before cleaning always unplug the appliance.
Caution! Never immerse the juicer’s casing, the
power cord or the plug of the power cord into
water or any other liquid. Avoid formation of water
condensate thereon and do not use the juicer in
places with increased humidity.
Advice. To facilitate cleaning after usage fill the
operating juicer with 1-2 glasses of warm water.
CLEANING OF THE EXTERNAL PART
OF THE JUICER’S CASING
First wipe the external part of the juicer’s casing
with a wet napkin soaked in a soapy solution and
then with a soft napkin or use a special agent for
cleaning of plastic surfaces.
CLEANING OF THE FILTER
After each use carefully wash the filter with the
brush included in the set. After washing look
though the filter to make sure that the filter holes
are not blocked.
To facilitate cleaning put the filter into hot soapy
water for 10 minutes immediately after usage.
Exercise caution. Sharp blades are located in the
filter base.
You can wash the juicer’s lid, filter cup, pulp
container and juice jar in the dishwasher.

16 17
TROUBLESHOOTINGSAFETY PRECAUTIONS
• Before operation of the juicer carefully read
this operating manual. It contains important
information on safety methods, operation and
care of the juicer. Keep this operating manual, so
that it can be referred to in the future, and if the
juicer passes to another owner give the manual
together with the appliance.
• The juicer is not meant for operation by
unattended children.
• Keep the juicer’s casing clean. During cleaning
observe the instructions specified in section
“Maintenance and Cleaning”.
• Avoid overhanging of the power cord from the
edge of the table, do not lay it on heated surfaces,
avoid twisting of the cord.
• Put the juicer only on a dry even surface.
• Always unplug the juicer when you leave it
unattended, after usage, as well as before
assembly, dismantling, cleaning and storage.
• Upon detection of any damages immediately
suspend operation of the juicer and bring it to
the nearest service center for testing, repair or
replacement.
• Do not leave the operating juicer unattended.
• Before operation make sure that the juicer is
correctly assembled.
• To load products always use the pusher for
products included in the set.
• Do not touch the sharp blades in the filter base.
Do not touch the sharp blades in the feed chute.
• Before juicing remove kernels from fruit, such as
plums, apricots and peaches.
• Use the juicer to make juices from vegetables,
fruit or berries.
• For safety reasons all operations on repair and
maintenance of the juicer shall be performed
only by authorized representatives of BORK
certified service centers.
Failure Solution
When you switch on the juicer it does
not work.
The juicer is probably assembled incorrectly. The lid block must be fixed in
the vertical position in two grooves on the juicer’s lid.
Small amount of juice. Unplug the juicer. Take off the juicer’s lid and clean the filter with the brush.
Assemble the juicer and continue juicing. Try to load soft and solid products
alternatively. Reduce the speed of product supply.
Pulp contains too much liquid. Unplug the juicer. Take off the juicer’s lid and clean the filter with the brush.
Juice leaks from under the juicer’s lid. Reduce the speed of product supply by the feed chute. Products with a large
content of water must be juiced at low speed.
Upon detection of any damages refer to the
nearest BORK service center.

18
SPECIFICATIONS
Voltage: 230–240 V
Frequency: 50 Hz
Power: 1500 W
The manufacturer reserves the right to make
changes to specifications as a result of continuous
product updating without additional notice thereon.
CONFIGURATION
Juicer: 1 pc.
Fine mesh filter: 1 pc.
Juice jar: 1 pc.
Pulp container: 1 pc.
Nozzle for extraction in a glass: 1 pc.
Brush to clean the filter: 1 pc.
Operating manual with guarantee card: 1 pc.