Bort BSS-1415-W User manual

230 V
50 Hz
1400
W
2520
L/min 15 L 10 kg
Wet
and dry
cleaning
Blower
function

Caution
1. The vacuum has multi functions, please read the manual carefully before operating and select
suitable accessories for different cleaning purposes.
2. Don’t leave when the vacuum is running. Please power off and take off the plug after the
cleaning.
3. Home use and indoor use only.
4. The vacuum is not suitable for children.
5. Only supplied accessories can be used.
6. Any damage, please contact after sales office for professional service.
7. Check the suction hose if any blockage before operation.
8. Please power off the vacuum immediately if any accidents.
9. Make sure the filtrations are fixed correctly before vacuuming.
Cleaning operation
Carpet cleaner version˖
1. Remove the dust bag.
2. Don’t shake the vacuum hardly. Use on flat surface.
3. Stop the vacuum immediately if any water or solution bubble sprays out. Check if too much
water or solution is collected in. Clean the water tank and floater assembly.
4. Only low bubble or no bubble solution can be used.
5. Solution tank capacity is about 3.5L.
6. Full tank solution can last working for 20-25 minutes. Please care about the solution level.
Operation process:
1. Release tank buckle, take out the top cover and remove the dust bag.
t ake out t he dust bag
don't put the dust bag when use t he washi ng f unct i on.

2. Hold the top hand, take off the floater frame as per direction instruction, check the floater
frame, strainer, filter, floater bottom, HEPA and check whether all are fixed in right position.
hol d t hi s pl ace
HEPA
st r ai ner
f l oat er
f l oat er f r ame
sponge f i l t er
floater bottombowl

3. Assemble the floater frame according to direction instruction. Put the top onto the water tank,
fix the tank buckle.
al i gn t he " open" l i ne
hol d t hi s pl ace

4. Insert the main hose adapter, rotate according to direction instruction and fix firmly. Then fix
the front solution nozzle in anticlockwise.
sol ut i on hol e
5. Connect two parts aluminum tubes together with the solution nozzles.

6. Connect the solution/water floor brush/solution nozzle with the aluminum tube/solution
nozzle.
7. Release solution tank buckle and take off the solution tank. Read the solution IM and fill the
solution and water in.
8.
sol ut i on t ank
cover
solution tank
buckle