Bosch Rexroth IndraControl L25 User manual

Instructions
Electric Drives
and Controls Pneumatics Service
Linear Motion and
Assembly Technologies
Hydraulics
Rexroth IndraControl
L25, L45, L65 and l85
Controls
R911336525
Edition 01

Rexroth IndraControl
L25, L45, L65 and L85
Controls
Instructions
DOK-CONTRL-IC*LX5*****-IT01-EN-P
RS-65021c30ed05e1790a6846a50196054e-1-en-US-4
Edition Release Date Notes
First edition 01.2012 --
Copyright © Bosch Rexroth AG 2012
This document, as well as the data, specifications and other information set
forth in it, are the exclusive property of Bosch Rexroth AG. It may not be re‐
produced or given to third parties without its consent.
Liability The specified data is intended for product description purposes only and shall
not be deemed to be a guaranteed characteristic unless expressly stipulated
in the contract. All rights are reserved with respect to the content of this docu‐
mentation and the availability of the product.
Published by Bosch Rexroth AG
Bgm.-Dr.-Nebel-Str. 2 ■ 97816 Lohr am Main, Germany
Phone [phone] ■ Fax [phone]
http://www.boschrexroth.com/
Development automation systems control platform SR (CS)
Note This document has been printed on chlorine-free bleached paper.
Title
Type of Documentation
Document Typecode
Internal File Reference
Record of Revision
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls

Table of Contents
Page
1 About this Documentation.............................................................................................. 5
2 Product Identification and Scope of Delivery................................................................. 7
2.1 Product Identification.............................................................................................................................. 7
2.2 Scope of Delivery.................................................................................................................................... 7
3 Using the Safety Instructions......................................................................................... 9
3.1 Safety instructions – structure................................................................................................................. 9
3.2 Explaining Signal Words and Safety Alert Symbol................................................................................. 9
4 Intended Use................................................................................................................ 11
5 Spare Parts, Accessories, and Wear Parts.................................................................. 13
5.1 Connector Set for the L45, L65, L85 Control........................................................................................ 13
5.2 Connector Set for the L25 Control........................................................................................................ 13
5.3 Fan for the L45, L65 and L85 Control................................................................................................... 13
5.4 Battery for the L45, L65 and L85 Control.............................................................................................. 13
5.5 Display Set............................................................................................................................................ 13
5.6 Cap for Compact Flash Slot.................................................................................................................. 13
5.7 Power Supply Unit ............................................................................................................................... 14
5.8 Wear Parts............................................................................................................................................ 14
6 Ambient Conditions...................................................................................................... 15
7 Technical Data............................................................................................................. 17
8 Standards..................................................................................................................... 19
8.1 Used Standards.................................................................................................................................... 19
8.2 CE Mark................................................................................................................................................ 19
8.2.1 Declaration of Conformity ................................................................................................................. 19
8.3 UL/CSA Certified.................................................................................................................................. 19
9 Interfaces..................................................................................................................... 21
9.1 Interface View....................................................................................................................................... 21
9.2 Overview............................................................................................................................................... 22
10 Mounting, Dismounting and Electrical Installation....................................................... 25
10.1 Installation Notes.................................................................................................................................. 25
10.2 Housing Dimensions............................................................................................................................. 26
10.3 Mounting the Control............................................................................................................................ 30
10.4 Mounting the Fan (if Necessary)........................................................................................................... 34
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG I/65
Table of Contents

Page
10.5 Dismounting the Control....................................................................................................................... 34
10.6 Dismounting and changing the Inline terminals.................................................................................... 36
10.7 Electrical Installation............................................................................................................................. 38
10.7.1 General Information........................................................................................................................... 38
10.7.2 External Power Supply Unit .............................................................................................................. 38
10.7.3 Voltage Supply for the Control........................................................................................................... 38
10.7.4 24 V Voltage Supply.......................................................................................................................... 40
10.7.5 Grounding
........................................................................................................................................................... 41
10.7.6 Shielding............................................................................................................................................ 42
10.7.7 Connecting Lines (for Digital Onboard Inputs, Outputs and Voltage Supply) to Tension Spring Con‐
nection Points.................................................................................................................................... 42
10.7.8 Notice for Use of the Control above 2700 m above MSL.................................................................. 43
10.7.9 Digital Onboard Inputs on Controls L45, L65 and L85...................................................................... 44
10.7.10 Digital Onboard Outputs on Controls L45, L65 and L85.................................................................... 45
10.7.11 Further Interfaces.............................................................................................................................. 46
11 Commissioning............................................................................................................ 47
12 Device Description....................................................................................................... 49
12.1 General Information.............................................................................................................................. 49
12.2 Display Elements.................................................................................................................................. 49
13 Error Causes and Error Elemination............................................................................ 51
14 Maintenance................................................................................................................ 53
14.1 General Information.............................................................................................................................. 53
14.2 Regular Maintenance............................................................................................................................ 53
14.3 Display (LCD Display)........................................................................................................................... 53
14.4 Lithium Battery...................................................................................................................................... 53
15 Ordering Information.................................................................................................... 55
15.1 Accessories and Spare Parts............................................................................................................... 55
15.2 Type Designation Code L25................................................................................................................. 55
15.3 Type Designation Code L45................................................................................................................. 56
15.4 Type Designation Code L65................................................................................................................. 57
15.5 Type Designation Code L85................................................................................................................. 58
16 Disposal....................................................................................................................... 59
16.1 General Information.............................................................................................................................. 59
16.2 Take-Back............................................................................................................................................. 59
16.3 Package................................................................................................................................................ 59
16.4 Batteries and Accumulators.................................................................................................................. 59
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
II/65
Table of Contents

Page
17 Service and Support.................................................................................................... 61
Index............................................................................................................................ 63
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG III/65
Table of Contents

Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
IV/65

1 About this Documentation
Overview – target groups and
product phases
The activities, product phases and target groups that refer to the present doc‐
umentation are marked in red color in the following figure.
Example: In the product phase "Mounting (assembly/installation)", the target
group "mechanic/electrician" can execute the activity "install" using this docu‐
mentation.
Selection Engineering
Design engineer Mechanic/
electrician
Service
Presales Afters ales
Mounting
Product
phases
Target
groups
Activities
(assembly/installation)
Commissioning
Operation De-
commissioning
Programmer
Technologist
Process
specialist
Programmer
Commissioning engineer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Mechanic/
electrician
Disposal company
To select
To prepare
To design
To construct
To unpack
To mount
To install
To parameterize
To program
To configure
To simulate
To optimize
To test To operate
To maintain
To remove
faults
To create
the NC program
To dismount
To dispose
Fig.1-1: Assigning the present documentation to the target groups, product
phases and activities of the target group
This document instructs the technical staff of the machine manufacturer on
how to perform the mechanic and electrical installation in a safe way and on
how to commission the device.
Required qualifications: Individual who is able to assess the tasks assigned
and identify possible safety risks owing to qualification in the subject, knowl‐
edge and experience. The individual should also be familiar with the stand‐
ards and regulations.
Availability This document is part of the present product delivery. This document has to
be available to the user at any time. The product has to be passed on togeth‐
er with this document only.
Scope This document is valid for all variants of the control, whose type designation
code starts with:
CML25.1...
CML45.1...
CML65.1...
CML85.1...
The type designation code specifications are located on the type plate of the
device, see also chapter 2 "Product Identification and Scope of Delivery" on
page 7.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 5/65
About this Documentation

Further documents Title Code (part short text) and
type of documentation1)
Parts number
PLC Programming with
Rexroth IndraLogic 1.0
DOK-CONTRL-
IL**PRO*V01-AWxx-EN-P
Operating and Programming
Guide
R911305036
RECO-Inline PROFIBUS
DP
(Rexroth-Inline PROFIBUS
DP)
DOK-CONTRL-R-IL-
PBSSYS-AWxx-EN-P
Application Manual
R911289597
RECO Inline PROFIBUS DP
Terminal and Module Sup‐
ply
(Rexroth Inline PROFIBUS
DP Terminal and Module
Supply)
DOK-CONTRL-R-IL-PB*-
BK-FKxx-EN-P
Application Manual
R911289587
Rexroth IndraWorks xxVRS
Engineering
DOK-IWORKS-ENGIN‐
EE*Vxx-AWxx-EN-P
Application Manual
R911327718
Automation Terminals of the
Rexroth Inline Product
Range
DOK-CONTRL-ILSY‐
SINS***-AWxx-EN-P
Application Manual
R911317021
Rexroth IndraControl L
Function Modules
DOK-CONTRL-IC*L*FM****-
PRxx-EN-P
Project Planning Manual
R911326408
Rexroth IndraWorks xxVRS
IndraLogic 2G
DOK-CONTRL-
IL2GPRO*Vxx-APxx-EN-P
Application Manual
R911325440
Rexroth IndraControl L25 DOK-CONTRL-IC*L25*****-
PRxx-EN-P
Project Planning Manual
R911328474
Rexroth IndraControl L45,
L65, L85
DOK-CONTRL-
ICL45L65L85-PRxx-EN-P
Project Planning Manual
R911332116
A Lx5 control is required to operate a MLC, IndraLogic, MTX, MLC, XLC or an
IndraLogic component. Therefore do also observe the documentation of the relevant
system.
Fig.1-2: Further documents
For further documents, please enter the specified parts number under "Docu‐
mentation and Downloads" in the "Rexroth Media Directory" at http://
www.boschrexroth.com.
The documents are updated regularly on the internet.
1) xx is the placeholder for the relevant edition of the documentation.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
6/65
About this Documentation

2 Product Identification and Scope of Delivery
2.1 Product Identification
The type plate is located on the back side.
Bosch Rexroth AG D-64711 Erbach
Made in Germany
MA6/210-7402-M
U
N
IN 3AC 230V 50/60 Hz
I
N
OUT 10/7,5/5/5/1,5/1,5 A max.
I-C-B-T-V
SW-Version V0,002
MNR: 1070086300 -105 04W03
1070
SN: 123456789
13026
2
3
6
7
7
10
11
12
13
14
9
8
5
4
1
Bosch rexroth Electric Drives and Controls GmbH
D-64711 Erbach Made in Germany
BTV40.1AHB-256S-P5C-
UN-FW
UNIN 3AC 230V 50760Hz
IN
OUT 10/7,5/5/5/1,5/1,5Amax.
I-C-B-T-V
SW-Version V0,002
MNR:1070170021 -101 03W19
7261
IND.CONT.EQ 17YB
SN: 123456814
15
16
Made inGermany
UN: AC 230V / 115V
IN: 0,7A/ 1,4A
MNR: 1070086255 -101 V-Nr: 1
TYP: PCPNL PEN400J1287 IS110-T
Bosch Rexroth Electric Drives and Controls GmbH
D-64711 Erbach
SN: 004012652
7261
IND.CONT-EQ 17YB
XXXXXXXXXXXXXXXXX
I-C-B-H-T-V
FD: 05W01
123
4
8
9
5
10
6
12
11 13
14
15
16
1 Logotype
2 Division or plant number
3 Type code (type designation code)
4 Parts number
5 State of revision
6 Date of manufacture (yyWww)
7 Nominal voltage
8 Nominal current
9 Test marking
10 Version number
11 CE marking
12 Underwriters Laboratories Inc. mark
13 Barcode
14 Serial number
15 Designation of origin
16 Company address
Fig.2-1: Type plates, example
2.2 Scope of Delivery
● Control
● Instructions
● Fan (only included in the scope of delivery of control L85)
● Power connector (only included in the scope of delivery of control L25)
● End clamp1)
● EMI shielding1)
● Female connector strip (already mounted)1)
● Antistatic bag1)
● Lithium battery (already inserted)2)
1) Not included in the scope of delivery of the controls with parts numbers
R911170827 and R911170899.
2) Only included in the scope of delivery of control L85 and the controls with parts
numbers R911170827 and R911170899.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 7/65
Product Identification and Scope of Delivery

Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
8/65

3 Using the Safety Instructions
3.1 Safety instructions – structure
The safety instructions are structured as follows:
Burns and chemical burns due to wrong
battery treatment!
CAUTION
Safety alert symbol
Signal word Consequences and
source of danger
Avoiding danger
Do not open the batteries and do not heat them over 80 °C.
Fig.3-1: Safety instructions – structure
3.2 Explaining Signal Words and Safety Alert Symbol
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and, if necessary, a safety alert symbol
(according to ANSI Z535.6-2006).
The signal word is meant to draw the reader's attention to the safety instruc‐
tion and signifies the degree of danger.
The safety alert symbol (a triangle with an exclamation point), which pre‐
cedes the signal words danger,warning and caution is used to alert the read‐
er to personal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate in‐
jury could occur.
NOTICE
In case of non-compliance with this safety instruction, property damage could
occur.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 9/65
Using the Safety Instructions

Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
10/65

4 Intended Use
Danger of destruction of the device if not ex‐
pressly stated accessories, mounting parts
and other components, cables, lines, soft‐
ware and firmware are used.
NOTICE
The control may only be used with the accessories and mounting parts listed
in this documentation. Components that are not expressly mentioned must
neither be attached nor connected. The same is valid for cables and lines.
Operation must only be carried out with the hardware component configura‐
tions and combinations that are expressly specified and with the software and
firmware indicated and specified in the respective documentation and func‐
tional descriptions.
Typical fields of use of the controls are:
● Handling systems and assembly systems
● Packaging and food processing machines
● Printing machines and paper converting machines
● Machine tools
● Woodworking machines
The controls may only be operated under the mounting and installation condi‐
tions, the position, and the ambient conditions (temperature, degree of pro‐
tection, humidity, EMC etc.) specified in this documentation.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 11/65
Intended Use

Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
12/65

5 Spare Parts, Accessories, and Wear Parts
5.1 Connector Set for the L45, L65, L85 Control
Order code Parts number Description
R-IB IL CML S01 PLSET R911299856 2 input, 2 output and 1 power con‐
nector
R-IB IL CML S04 PLSET R911172193 2 input, 2 output and 1 power con‐
nector, continuously numbered
Fig.5-1: Connector set for the L45, L65 and L85 control
5.2 Connector Set for the L25 Control
Order code Parts number Description
R-IB IL SCN-PWR IN PWR R911171765 -
Fig.5-2: Power connector for the L25 control
5.3 Fan for the L45, L65 and L85 Control
Order code Parts number Description
CAL01.1-F2 R911171153 -
Fig.5-3: Fan for the L45, L65 and L85 control
5.4 Battery for the L45, L65 and L85 Control
Order code Parts number Description
CAP01.1-B2 R911170806 3 V lithium battery for onboard
SRAM
Fig.5-4: Battery for the L45, L65 and L85 control
5.5 Display Set
Order code Parts number Description
CAL03.1-D1 R911172142 Display exchange set for the con‐
trols
Fig.5-5: Display set for the control
5.6 Cap for Compact Flash Slot
Order code Parts number Description
CAL02.1-S1 R911171617 Cap for Compact Flash slot
Fig.5-6: Cap for Compact Flash slot
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 13/65
Spare Parts, Accessories, and Wear Parts

5.7 Power Supply Unit
Order code Parts number Description
VAP01.1H-W23-024-010-NN R911171065 24 V power supply unit
Fig.5-7: Power supply unit
5.8 Wear Parts
Wear parts are not subject to any warranty.
Display The service life of the display is limited. A progressive deterioration takes
place after the service life has been exceeded.
Service life:
● 60,000 hours at a temperature of 23℃ (± 5°C) and a relative air humidi‐
ty of 60% RH (± 20% RH).
3 V lithium battery Service life: At least five years.
Fan Fans are mechanical components subject to wear. The service life of the fan
depends particularly on the temperature.
Service life of the fan:
● 95,000 hours at 24 °C.
The fan operating hours counter can be read via the control.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
14/65
Spare Parts, Accessories, and Wear Parts

6 Ambient Conditions
In operation Transport Storage
Max. surrounding
air temperature
+5 ℃ to +55 ℃ -25 ℃ to +70 ℃ -25 ℃ to +70 ℃
Relative humidity RH -2; 5 % to 95 %
according to DIN
EN 61131-2,
non-condensing.
RH -2; 5 % to 95 %
according to DIN
EN 61131-2,
non-condensing.
RH -2; 5 % to 95 %
according to DIN
EN 61131-2,
non-condensing.
Air pressure Up to 2,700 m
above MSL accord‐
ing to DIN 60204.
Above 2700 m
above MSL, see
chapter 10.7.8
"Notice for Use of
the Control above
2700 m above
MSL" on page 43.
Up to 3000 m
above MSL accord‐
ing to DIN 60204.
Above 2700 m
above MSL, see
chapter 10.7.8
"Notice for Use of
the Control above
2700 m above
MSL" on page 43.
Up to 3000 m
above MSL accord‐
ing to DIN 60204.
Above 2700 m
above MSL, see
chapter 10.7.8
"Notice for Use of
the Control above
2700 m above
MSL" on page 43.
Mechanical
strength
Max. vibration:
Frequency range:
10 Hz to 150 Hz
Excursion:
0.075 mm
at 10 Hz to 57 Hz
Acceleration: 1 g
at 57 Hz to 150 Hz
acc. to EN
60068-2-6
Max. shock:
15 g acc. to
EN 60 068-2-27, no
disturbance of the
function.
Max. shock:
15 g acc. to
EN 60 068-2-27, no
disturbance of the
function.
Fig.6-1: Ambient conditions
The surrounding air must be free from acids, alkaline solutions,
corrosive agents, salts, metal vapors, and other electrically con‐
ductive contaminants in high concentrations.
The ambient air must be dust-free. Housings and installation com‐
partments must at least comply with degree of protection IP 54
according to DIN VDE 0470-1.
Notice for control L25 Production failure possible due to control fail‐
ure resulting from overheating.
NOTICE
Operation is allowed up to 55 ℃ and if the air recirculates. If the air does not
recirculate, the fan has to be used.
If the internal temperature is 87 ℃ or higher, the display indicates the
"Temp !!!" warning.
If the internal temperature reaches approx. 92 ℃, the control switches off au‐
tomatically.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 15/65
Ambient Conditions

Use the "IH_Temperature" function to read out the internal control tempera‐
ture in the "RIH_CMLx.library" library of the "IndraWorks" application program
(from version 11), see also documentation Rexroth IndraWorks 12VRS Basic
Libraries IndraLogic 2G, ( DOK-IL*2G*-BASLIB**V12-LI01-EN-P, parts num‐
ber R911333835).
Notice for control L45, L65 and
L85 Production failure possible due to control fail‐
ure resulting from overheating.
NOTICE
Operation is allowed up to 55 ℃ and if the air recirculates. If the air does not
recirculate, the fan has to be used.
If the internal temperature is 70 ℃ or higher, the display indicates the
"Temp !!!" warning.
If the internal temperature reaches approx. 80 ℃, the control switches off au‐
tomatically.
Use the "IH_Temperature" function to read out the internal control tempera‐
ture in the "RIH_CMLx.library" library of the "IndraWorks" application program
(from version 11), see also documentation Rexroth IndraWorks 12VRS Basic
Libraries IndraLogic 2G, ( DOK-IL*2G*-BASLIB**V12-LI01-EN-P, parts num‐
ber R911333835).
Notice for control L85 With the IndraControl L85 control, the fan is included in the scope
of delivery and is imperatively necessary for its operation. Infor‐
mation on the fan assembly is contained in chapter 10.4 "Mount‐
ing the Fan (if Necessary)" on page 34.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
16/65
Ambient Conditions

7 Technical Data
Processor Control L25: Renesas SH7785 with 576 MHz (CPU CLK)
Control L45: AMD LX800 with 500 MHz
Control L65: Intel Celeron M with 1.0 GHz
Control L85: Intel Core2Duo with 1.2 GHz
RAM Controls L45, L65 and L85:
Min. 256 MByte DRAM and min. 256 kByte RDS1)
Optional:
● 8 or 16 MByte SRAM battery buffered
Control L25:
Min. 128 MByte DRAM and min. 256 kByte RDS1)
Interfaces:
Interface to function
modules
● Rexroth PC104Plus
Interface to
I/O terminals
● Rexroth Inline interface
Communication interfa‐
ces
(on L45, L65 and L85)
● 1 × Ethernet connection (RJ 45, 10Base-T,
100Base-TX)
Optional:
● 1 × third generation sercos master/slave interface
Optional:
● 1 × PROFIBUS DP master/slave interface
● 2 × Ethernet connection (RJ 45, 10Base-T, 100
Base-TX) for TCP/IP or RT Ethernet (PROFINET RT
or EtherNet/IP)
Communication interfa‐
ces
(on L25)
● 1 × Ethernet connection (RJ 45, 10/100 base-T)
● 1 × third generation sercos master/slave interface
● Alternative option to the sercos master/slave inter‐
face
- 1 × PROFIBUS DP master/slave interface or
- 2 × Ethernet connection (RJ 45, 10Base-T, 100
Base-TX) for TCP/IP or RT Ethernet (PROFINET RT
or EtherNet/IP)
Ready Contact ● 1 × single-pin ready contact
Digital inputs and out‐
puts (only on L45, L65
and L85)
● 8 × electrically isolated digital inputs
● 8 × electrically isolated digital outputs
Weight 1.8 kg
1) RDS - Remanent Data Storage
Remanent data is automatically written to the Compact Flash card after loss of
voltage and is restored after rebooting the control.
DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
Bosch Rexroth AG 17/65
Technical Data

Degree of protection IP 20
Dimensions See chapter 10.2 "Housing Dimensions" on page 26
Fig.7-1: Technical data
Voltage supply and current, power
consumption
The control is supplied with 24 V. The following values according to
DIN EN 61131-2 apply to the operating voltage:
Nominal voltage DC 24 V
Tolerance -15 %, +20 % (without residual ripple)
Residual ripple ±5 %
Umax 30 V
Umin 19.2 V
Power consumption of the controls from
ULS at nominal voltage and all connected
function modules and Inline terminals
Control L25: 2 A max.
Control L 45: 2.6 A max.
Control L65: 3.0 A max.
Control L85: 3.0 A max.
Current consumption of the controls from
UM and US
Max. 8 A in total
Power consumption (typically) of the con‐
trols (without connected I/O and function
modules)
Control L25: 8.7 W
Control L45: 14 W
Control L65: 18 W
Control L85: 21 W
Fig.7-2: Operating voltage and current, power consumption
Three operating voltages (segment voltage US, the supply voltage ULS and
the main voltage UM) are to be applied to the control, see also chapter 10.7.4
"24 V Voltage Supply" on page 40.
Possible production failures due to malfunc‐
tions caused by feed backwards due to un‐
connected ground terminal.
NOTICE
Ensure that a ground terminal is always connected. In this way malfunctions
that are caused by feed backwards via I/O signals can be avoided.
Bosch Rexroth AG DOK-CONTRL-IC*LX5*****-IT01-EN-P
Rexroth IndraControl L25, L45, L65 and L85 Controls
18/65
Technical Data