8 | English
English
Safety Instructions for Rotary
Lasers and Remote Control
All instructions must be read and observed
in order to enable work to be carried out
safely. The integrated safeguards may be
compromised if these instructions are not
observed. Never make warning signs unrecognisable.
STORE THESE INSTRUCTIONS IN A SAFE PLACE AND IN-
CLUDE THEM WITH THE PRODUCT WHEN GIVING IT TO A
THIRD PARTY.
uThe measuring tool is delivered with a laser warning
sign (marked in the illustration of the measuring tool
on the graphics page).
uIf the text of the laser warning label is not in your na-
tional language, stick the provided warning label in
your national language over it before operating for the
first time.
uThe laser exit holes on the measuring tool are marked
with warning labels. Take note of their position when
using the measuring tool.
uIf the text of these labels is not in your national lan-
guage, stick the provided warning label in your na-
tional language over it before operating for the first
time.
uWarning! If operating or adjustment devices other
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
uDo not make any modifications to the laser equip-
ment. The setting options described in these operating
instructions can be used safely.
Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This measuring tool generates
laser class 3R laser radiation according to
EN60825‑1. Looking into the laser beam dir-
ectly can cause eye injuries – even from far
away.
uDo not use the laser goggles (accessory) as protective
goggles. The laser goggles make the laser beam easier to
see; they do not protect you against laser radiation.
uDo not use the laser goggles (accessory) as
sunglasses or while driving. The laser goggles do not
provide full UV protection and impair your ability to see
colours.
uHave your product serviced only by a qualified spe-
cialist using only original replacement parts. This will
ensure that the safety of the product is maintained.
uDo not let children use the laser measuring tool unsu-
pervised. They could unintentionally blind themselves or
other persons.
uAvoid laser beam reflections on smooth surfaces such
as windows or mirrors. Even the reflected laser beam
can cause eye injuries.
uThe measuring tool should only be operated by people
who have experience in using laser tools. According to
EN 60825-1, this includes knowledge of the biological
impact of the laser on eyes and skin as well as the correct
application of laser safety guidelines to prevent hazards.
uDo not operate in potentially explosive atmospheres,
such as in the presence of flammable liquids, gases or
dusts. Sparks may be produced, which can ignite dust or
fumes.
uAlways position the measuring tool such that the laser
beams travel far above or below eye level. This ensures
that no eye injuries are caused.
uMark out the area where the measuring tool is being
used with suitable laser warning signs. This will pre-
vent people who are not using the measuring tool from
entering the danger zone.
uDo not store the measuring tool in places which can be
accessed by unauthorised individuals. People who are
unfamiliar with the operation of the measuring tool may
cause harm to themselves or others.
uComply with any applicable national regulations when
using a laser from laser class 3R. Failure to comply with
these regulations may cause injuries.
uEnsure that the laser radiation area is guarded or
screened. Restricting the laser radiation to controlled
areas prevents eye injuries being caused to people who
are not using the laser measuring tool.
uNever leave the measuring tool unattended when
switched on, and ensure the measuring tool is
switched off after use. Others may be dazzled by the
laser beam.
uDo not use any optical instruments such as binoculars
or magnifying glasses to view the radiation source.
Doing so can damage your eyes.
Keep the magnetic accessories away from
implants and other medical devices, e.g.
pacemakers or insulin pumps. The magnets
in the accessories generate a field that can im-
pair the function of implants and medical
devices.
uKeep the magnetic accessories away from magnetic
data storage media and magnetically-sensitive
devices. The effect of the magnets in the accessories can
lead to irreversible data loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
1 609 92A 69Y | (23.04.2021) Bosch Power Tools
