Bosch Twist User manual

Twist
Quick start guide
LET´S GET
STARTED
EN

1. Install the Smart Home Controller
If not yet installed: Download the Bosch Smart
Home app and install the Bosch Smart Home
Controller.
2. Launch the Smart Home App
Launch the Bosch Smart Home App and select
"Add device". Follow the instructions in the app.

3. Scan the QR code
The app will prompt you to scan the QR code
on the product. The QR code is on the back
of the Twist. Remove the cover on the battery
compartment.
4. The app will now guide you through
the installation process
Follow the instructions in the app from this
point onwards. It will take you through each
step until setup is complete. Always follow the
safety instructions for the product as well.

Press up or down to activate functions.Press on the right or left to select functions.

If the device is mounted in the wall holder:
turn the Twist a little to the right or left to select
functions. It returns to its home position automati-
cally.

Device type name Twist
Article number 8-750-000-328
Batteries 2 x 1.5 V LR03/Micro/AAA – alkaline batteries only
Wireless frequency 2.4 GHz
Max. transmitting capacity 10 mW
Radio range in free-field conditions up to 90 m
Degree of protection IP20
Software class Class A
Ambient temperature +5°C to + 35°C (32°F to 122°F)
Technical Data

CMSIS
Copyright (c) 2009 - 2015 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms,
with or without modification, are permitted provid-
ed that the following conditions are met:
▶ Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
▶ Redistributions in binary form must reproduce
the above copyright notice, this list of conditions
and the following disclaimer in the documenta-
tion and/or other materials provided with the
distribution.
▶ Neither the name of ARM nor the names of its
contributors may be used to endorse or promote
products derived from this software without
specific prior written permission.
Open Source software
This Bosch Smart Home product uses open-source
software. Below you will find the license informa-
tion for the components used.

pdi-driver
Copyright (c) Pervasive Displays Inc. All rights
reserved.
Redistribution and use in source and binary forms,
with or without modification, are permitted provid-
ed that the following conditions are met:
1. Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and
the following disclaimer in the documentation and/
or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL COPYRIGHT HOLDERS AND
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEV-
ER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILI-
TY OF SUCH DAMAGE.

mbedtls
Copyright (C) 2015-2017, Silicon Labs,
http://www.silabs.com
Copyright (C) 2006-2015, ARM Limited,
All Rights Reserved
Licensed under the Apache License, Version 2.0
(the “License”); you may not use this file except in
compliance with the License. You may obtain a copy
of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in
writing, software distributed under the License is
distributed on an „AS IS“ BASIS, WITHOUT WARRAN-
TIES OR CONDITIONS OF ANY KIND, either express
or implied. See the License for the specific language
governing permissions and limitations under the
License.
Safety instructions
▶ Take the batteries out of the device if it is not
used for a prolonged period of time.
▶ The enclosed batteries are not suitable for
charging.
▶ Do not modify the product in any way. Any other
use is considered unintended use. No liability is
accepted for any consequential damage.
▶ The product may only be used indoors with
Bosch Smart Home original components and
recommended partner products.
▶ Avoid dust, moisture, vibrations, mechanical
stress, cold, and constant exposure to sunlight
or heat.
▶ When choosing a fixing location and when dril-
ling, pay attention to potential electrical lines
and/or supply lines that could be behind the wall.

▶ Persons with pacemakers should keep at least 10
to 15 cm away from the device and the wall holder.
The magnets in the device and wall holder genera-
te a field that can affect the functioning of pacema-
kers.
▶ When controlling a device remotely or using auto-
mated control, external circumstances (such as the
radio connection to the Smart Home Controller
being interrupted) mean it cannot always be gua-
ranteed that commands will actually be carried out
or that the correct status of the device will be dis-
played in the app and on other Smart Home display
devices (e.g. a Twist). This may result in damage to
property and/or injury.
In this case:
• Please ensure as far as possible that nobody is at
risk when using remote control or automated con-
trol.
• Please exercise particular care when setting up or
adjusting a remote control or automated control,
checking that everything is working as it should at
regular intervals.