Boss Audio Systems BV775B User manual

To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.
[ 1 ]

IMPORTANT NOTICE & PRECAUTIONS
Thank you for using our company multi-media player! To operate the unit correctly, please read
the operation manual carefully before using. Keep this operation manual for further reference.
The unit is designed only for DC 12V negative ground operation system. Make sure your vehicle is
connected to DC 12V negative ground electrical system. Do not connect it to 24V power supply in
trucks or buses, or else it will be damaged. Be sure to connect the speaker (-) leads to the speaker
(-) terminal. Never connect the left and right channel speaker wires together or to the vehicle body.
The normal temperature for operation is between -20 and +60 degree Celsius. Do not work in
extreme high or low temperature and block vents or radiator panels of the unit, blocking them will
cause heat to build up inside the unit and may cause damage or fire.
Do not put the device in a moist environment or water to avoid electric shock, damage and/or fire
due to a short circuit.
This unit can play the following discs (12 cm) and media files: DVD±R/RW / WMV / VCD / MP3 /
WMA / CD-R/RW / JPEG. Please use genuine discs instead of incompatible discs, or it will damage
the device and/or shorten the service life.
INSTALLATION & ACCESSORIES
This unit comes with the following accessories for installation:
2 x mounting brackets / 8 x mounting screws / 1 x mounting stud with boot / 1 x trim ring / 3 x
power cables
- To ensure safety and operate the device normally, installation of unit by professional technician
is strongly recommended.
- Only use the mounting brackets and screws supplied for installation. Installation may vary on
type of cars and supplied parts.
[ 2 ]

WIRING CONNECTION
Socket A (Power) Socket D (Audio / Video Input & Output)
A1 Yellow Constant (+12V) FL (White) Front Left Audio Output
A2 Orange Illumination Input (+12V) FR (Red) Front Right Audio Output
A3 Blue Antenna Output (+12V) RL (White) Rear Left Audio Output
A4 Black Ground (B-) RR (Red) Rear Right Audio Output
A5 Red Ignition Switch (+12V) SW (Green) 1 Subwoofer Output
SW (Green) 2 Subwoofer Output
Socket B (Speaker Output) F-CAM (Brown) Front Camera Input
B1 Purple / Black Rear Right (-) R-CAM (Yellow) Rear Camera Input
B2 Purple Rear Right (+) V1 (Yellow) Video Output
B3 Grey / Black Front Right (-) V-IN (Yellow) Video Input
B4 Grey Front Right (+) L (White) Left Audio Input
B5 White / Black Front Left (-) R (Red) Right Audio Input
B6 White Front Left (+)
B7 Green / Black Rear Left (-) ANT Radio Antenna
B8 Green Rear Left (+) SWC Steering Wheel Control
Socket C (Accessory Control)
C1 Blue / White Remote Output (+12V, 500mA)
C2 Light Green Parking Brake Input
C3 Violet / White Reverse Input (+12V)
C4 Red / Violet Front Camera Power (+12V, 500mA)
C5 Red / White Rear Camera Power (+12V, 500mA)
[ 3 ]

MAIN UNIT OPERATION
Operations & Controls
1. Press to eject disc from the disc slot (when a disc has been inserted).
2. Press to shift screen between MAIN MENU and current operation mode.
3. Power On/Off
When the unit is turned off, press to turn on the unit.
When the unit is turned on, press & hold shortly to turn off the unit.
Volume Control
Rotate to adjust sound output level
Sound Mute
When the unit is turned on, press to turn on or off of sound mute control.
4. Open the USB cover and insert USB device to the USB slot for digital files playback.
5. Open the USB cover, press with a pointed object (such as a ballpoint) to reset the unit to its
initial setting by the factory (default stage).
6. Insert an external device to this jack in order to have sound output of that external device
through the unit.
7. Built-in microphone for voice reception under Bluetooth operation.
8. Remote control sensor for signal reception from remote handset.
9. Tuner Mode
Press to tune the radio frequency upward or downward and stop for broadcasting when a
radio station received.
Press & hold shortly to shift to manual tuning mode. At this mode, press repeatedly to fine
tune the radio frequency upward or downward.
Disc/USB/SD Input Mode / Bluetooth Streaming Mode
Press repeatedly to shift track upward or downward for playback.
Press & hold shortly to activate fast forward/rewind mode. At this mode, press repeatedly to
select various fast forward/rewind speeds for playback. (Note: Fast forward/rewind is not
available at Bluetooth streaming mode & picture playback mode)
10. It shows the status of operation on the unit. This screen is also a touch display – soft touch
the screen for different operations of unit (refer to other parts of this manual for operation
details).
11. Insert or remove disc from this disc slot.
12. Open the SD cover and Insert micro SD card to this port for digital files playback.
[ 4 ]

REMOTE HANDSET – GENERAL OPERATION
BATTERY REPLACEMENT
Refer to the back of remote handset for details on
how to replace the battery. Replace the battery
only with the same or equivalent type.
Note: If the remote handset will not be used for a
long time, please remove the battery from the
battery compartment.
Remove this tab before using the remote handset
NO. SYMBOL OPERATION & CONTROL MODES
1. When the unit is turn off, press to turn on the unit.
When the unit is turn on, press & hold shortly to turn off the unit.
MUTE During unit operation, press to turn on or off of sound mute control
2. SOURCE Press repeatedly to select the desired mode for operation
3. CLR At Phone (Bluetooth) mode, press to erase the digit input by error.
4. LOUD Press & hold shortly to turn on or off of loudness control.
EQ Press repeatedly to select the desired preset equalization mode.
5. AUDIO At video playback mode, each time press & hold shortly to select different
audio output channels. (Note: Available on input device or media files
recorded with different output channels)
6. OSD At media playback mode, press & hold shortly to display the playback
menu on screen (Note: Not available at music playback mode)
7. 1 – 6 Tuner Mode
Press any one of the number key 1-6 to select a station that had been
stored in the preset memory number key 1-6 for broadcasting.
Press & hold shortly the number key 1-6 to store the current broadcasting
channel/frequency to the preset memory number key 1-6.
0 – 9 Disc / USB / SD Input Mode
Press directly to input the number of track for playback.
Phone (Bluetooth) Mode
Press directly to input the phone number for dial out.
[ 5 ]

8. SCAN At tuner mode, press to start scanning the radio frequency upward and
stop for broadcasting for a few seconds when a radio station received.
9. BND Tuner Mode
Press repeatedly to select the desired radio band for broadcasting.
When the unit is under other operation mode, press to shift current
operation mode to tuner mode for operation (not available at disc / USB /
SD playback mode).
Disc / USB / SD Input Mode
At video playback mode under disc input, press to stop playback.
At music / photo playback mode under disc input and playback mode under
USB / SD input, press to stop playback and shift to folder / playlist menu for
playback selection. Press again to stop playback and shift to tuner mode.
(Note: Depended on the input device & playback media, folder menu may
not be available)
Bluetooth Streaming Playback Mode
Press to stop playback and will shift back to tuner operation mode.
Phone (Bluetooth) Mode
Press to hang up or refuse an incoming call.
10. RDM At disc / USB / SD input playback mode, press & hold shortly to turn on or
off of random playback of the input device.
11. INT At music playback mode, press & hold shortly to turn on or off of intro
playback of the input device. (Note: Not available at Bluetooth streaming
mode)
12.
►▌▌
At playback mode under disc / USB / SD input and Bluetooth streaming
mode, press to pause, resume or start playback.
13. ▲/▼/▶/◀DVD Mode
At DVD menu/title display mode, press to select the desired setting/setup
and press ENT to confirm/enter.
Folder / Playlist Menu Mode
During folder/playlist menu display at media playback mode, press ▶ / ◀
repeatedly to shift page up and down, press ▲/▼ repeatedly to select
track/folder for playback. Once selected, press ENT to confirm.
Photo Playback Mode
Press to rotate photo position or show up-down, left-right mirror image.
14. ENT DVD Mode / Folder/Playlist Mode
At DVD menu/title display mode as well as folder/playlist menu display at
media playback mode, press ▲/▼/ ▶ / ◀ to select the desired setting/setup
and press ENT to confirm/enter.
15. / Tuner Mode
Press to tune the radio frequency upward or downward and stop for
broadcasting when a radio station received.
Press & hold shortly to shift to manual tuning mode. At this mode, press
repeatedly to fine tune the radio frequency upward or downward.
Disc / USB / SD Input Mode (Playback Mode)
Press repeatedly to shift track upward or downward for playback.
Press & hold shortly to activate fast forward/rewind mode. At this mode,
press repeatedly to select various speeds of fast forward/rewind. (Note:
Fast forward/rewind is not available for operate at photo playback mode)
Bluetooth Streaming Mode
Press to shift track upward or downward for playback.
16. REP At playback mode under disc / USB / SD input, each time press & hold
shortly to activate various repeat playback setting.
[ 6 ]

17. ANGLE At video playback mode, each time press & hold shortly to view angle
changes in sequential order (available on media files recorded with this
feature).
18. TITLE At DVD mode, press & hold shortly to display on screen the menu of the
disc and playback will resume after a while.
19. LOC At tuner mode, press to select local setting for reception of strong signal
stations and distance setting for reception of weak signal stations. (Note:
LOC appears on screen on local setting whereas DX appears on screen on
distance setting)
20. SLOW Video Playback Mode
Each time press & hold shortly to select different speeds on slow motion
playback.
Phone (Bluetooth) Conversation Mode
Press to input if so required.
21. VOL + / VOL - Press repeatedly or press & hold to adjust sound output level.
22. MENU / PBC DVD Mode
Press & hold shortly to display on screen the menu of the entire disc &
playback will resume after a while.
VCD Mode
Press & hold shortly to turn or off of PBC playback.
#
Phone (Bluetooth) Conversation Mode
Press to input if so required.
23. SETUP During unit operation, press & hold shortly to activate settings menu on
screen for various system setup. Press & hold shortly again to return to
previous operation mode. (Note: System setup cannot be operated by
remote handset)
24. / PHONE Phone (Bluetooth) Mode
During unit operation, press to shift to Phone (Bluetooth) mode for
operation.
Press to pick up an incoming call; dial out after input a phone number;
redial last contacted number.
Phone (Bluetooth) Conversation Mode
Press to shift conversation between main unit and mobile phone.
Remarks: Depends on the input devices & playback media files, operation may be varied or not
available for operation.
[ 7 ]

ON SCREEN – MAIN MENU OPERATION
MAIN MENU MAIN MENU
At MAIN MENU, touch the icon of the desired mode on screen and the unit will then enter into the
mode that selected for operation.
At MAIN MENU, touch & hold on screen and slide to left or right will shift screen to another MAIN
MENU for operation selection.
1. Touch to start tuner operation (when the radio antenna connected).
2. Touch to start Bluetooth streaming operation (when a mobile phone connected).
3. Touch to start disc input operation (when a disc inserted).
4. Touch to start phone (Bluetooth) operation (when a mobile phone connected).
5. Touch to start USB input operation (when an USB device inserted).
6. Touch to start camera input operation (when connected with front and/or rear camera).
7. Touch to start various setup of the unit.
8. Touch to start auxiliary input operation (when an external device has been connected).
9. Touch to start AV input operation (when an external AV device has been connected).
10. Touch to start SD card input operation (when a micro SD card inserted).
11. Touch to start mobile phone mirror linking operation (when the mobile phone connected to the
front USB port).
12. Touch to shift to next MAIN MENU.
13. Touch to shift to previous MAIN MENU.
14. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
15. Touch to activate AUDIO MENU for various audio settings.
ON SCREEN – AUDIO SETTING
During unit operation and when this icon appeared on screen, touch to activate AUDIO
MENU for various audio setup.
[ 8 ]

AUDIO MENU (EQUALIZER) AUDIO MENU (POSITION)
1. Touch to shift to AUDIO MENU (POSITION) for various audio output settings.
2. Touch to shift to AUDIO MENU (EQUALIZER) for various equalization settings.
3. At “User” mode, hold & slide to set for the desired frequency level.
4. Touch repeatedly to select the desired preset equalization mode. At “User” mode, the
frequencies can be set by the user.
5. At “User” mode, touch to reset the frequencies to the default level.
6. Touch to turn on or off of loudness.
7. Touch repeatedly to set for the desired output level on balance, fader & subwoofer.
8. Hold & slide to set for the output level on left / right / front / rear speaker.
9. Touch to reset the output level of left / right / front / rear speakers to center position.
10. This shows the current volume output level.
11. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
12. Touch to shift screen to previous menu or operation mode.
13. Touch to shift screen to previous menu or operation mode.
VOLUME CONTROL MENU VOLUME CONTROL MENU
During unit operation and when the above VOLUME CONTROL MENU appeared on screen:
1. Touch to turn on sound mute.
2. Touch to turn off sound mute.
3. Hold & slide to set for the desired sound output level.
4. Hold & slide to turn off sound mute and set for the desired sound output level.
[ 9 ]

ON SCREEN – SETUP OPERATION
At MAIN MENU, touch on screen and shift to SETTINGS MENU for various setup
selection of the unit.
SETTING MENU SETTINGS MENU
1. Touch to shift to next SETTINGS MENU.
2. Touch to shift to previous SETTINGS MENU.
3. Touch to shift to GENERAL SETTINGS MENU for general settings of the unit.
4. Touch to shift to CAMERA SETTINGS MENU for camera settings of the unit.
5. Touch to shift to CLOCK SETTINGS MENU for clock settings of the unit.
6. Touch to shift to AUDIO SETTINGS MENU for audio settings of the unit.
7. Touch to shift to TUNER SETTINGS MENU for radio settings of the unit.
8. Touch to shift to CONTROLS (BACKLIGHT) SETTINGS MENU for backlight settings of the
unit.
9. Touch to shift to ILLUMINATION (VISUAL) SETTINGS MENU for visual settings of the unit.
10. Touch to shift to ABOUT (SYSTEM) SETTINGS MENU for system settings of the unit.
11. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
12. Touch to activate AUDIO MENU for various audio settings.
13. Touch to shift to MAIN MENU for operation mode selection.
GENERAL SETTINGS
GENERAL MENU GENERAL MENU
[ 10 ]

PASSWORD INTERFACE
1. Touch to activate WALLPAPER INTERFACE to select the desired wallpaper (background) of
the unit.
2. Touch repeatedly to select the delay time of ACC power cutoff.
3. Touch to turn on or off of beep sound when touching on screen or pressing the control keys
on main unit / remote handset for control.
4. Touch to select the system language on screen.
5. Touch to activate PASSWORD INTERFACE to set the parental lock on DVD.
(Note: the default password on parental lock: 0000)
6. Touch to input the password.
7. Touch to erase the digit input by error.
8. Touch to confirm the password.
9. When parental password set/input, touch repeatedly to select the desired grade of DVD.
10. Touch to show other settings modes of the unit.
11. Touch to shift to CAMERA SETTINGS MENU for camera settings of the unit.
12. Touch to shift to CLOCK SETTINGS MENU for clock settings of the unit.
13. Touch to shift to AUDIO SETTINGS MENU for audio settings of the unit.
14. Touch to shift to TUNER SETTINGS MENU for radio settings of the unit.
15. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
16. Touch to activate AUDIO MENU for various audio settings.
17. Touch to shift back to GENERAL SETTINGS MENU for general settings of the unit.
18. Touch to shift to MAIN MENU.
CAMERA SETTINGS
CAMERA MENU CAMERA MENU
[ 11 ]

CAMERA MENU
1. Touch repeatedly to select the front or rear camera viewing when the car is shifted from
forward mode to backward mode. When “Off” is selected, no camera viewing available at car
backward mode.
2. Touch to turn on or off of rear camera input.
3. When rear camera input turn on, touch to turn on or off of +12V power connection to the rear
camera (when the red/white wire connected).
4. When rear camera input turn on, touch repeatedly to select the delay time of rear camera
input viewing.
5. Touch to turn on or off of front camera input.
6. When front camera input turn on, touch to turn on or off of +12V power connection to the front
camera (when the red/violet wire connected).
7. When front camera input turn on, touch repeatedly to select the delay time of front camera
input viewing.
8. Touch to shift to next CAMERA SETTINGS MENU.
9. Touch to shift to previous CAMERA SETTINGS MENU.
10. Touch to shift to GENERAL SETTINGS MENU for general settings of the unit.
11. Touch to shift to CLOCK SETTINGS MENU for clock settings of the unit.
12. Touch to shift to AUDIO SETTINGS MENU for audio settings of the unit.
13. Touch to shift to TUNER SETTINGS MENU for radio settings of the unit.
14. Touch to show other setting modes of the unit.
15. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
16. Touch to activate AUDIO MENU for various audio settings.
17. Touch to shift to MAIN MENU.
[ 12 ]

CLOCK SETTINGS
CLOCK MENU
1. Touch to select 12 hour or 24 hour display format of clock.
2. Touch repeatedly to adjust hour of clock.
3. Touch repeatedly to adjust minute of clock.
4. At 12 hour display format, touch to select AM / PM display.
5. Touch to shift to GENERAL SETTINGS MENU for general settings of the unit.
6. Touch to shift to CAMERA SETTINGS MENU for camera settings of the unit.
7. Touch to shift to AUDIO SETTINGS MENU for audio settings of the unit.
8. Touch to shift to TUNER SETTINGS MENU for radio settings of the unit.
9. Touch to show other settings modes of the unit.
10. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
11. Touch to activate AUDIO MENU for various audio settings.
12. Touch to shift to MAIN MENU.
AUDIO SETTINGS
AUDIO SETTING MENU AUDIO SETTING MENU
1. Touch to turn on or off of internal amplifier output.
When the internal amplifier has been turn off, this is no power output from all the speakers but
output from RCA and sub-woofer still remain.
2. Touch repeatedly to select the volume level when ignition of the car turn on.
3. Touch repeatedly to increase or lower the volume level against the current output level under
tuner mode, Bluetooth streaming mode and disc input modes.
[ 13 ]

4. Touch repeatedly to increase or lower the volume level against the current output level under
phone (Bluetooth) mode, USB input mode, SD input mode, auxiliary input model and AV input
modes.
5. Touch to shift to next AUDIO SETTINGS MENU.
6. Touch to shift to previous AUDIO SETTINGS MENU.
7. Touch to shift to GENERAL SETTINGS MENU for general settings of the unit.
8. Touch to shift to CAMERA SETTINGS MENU for camera settings of the unit.
9. Touch to shift to CLOCK SETTINGS MENU for clock settings of the unit.
10. Touch to shift to TUNER SETTINGS MENU for radio settings of the unit.
11. Touch to show other settings modes of the unit.
12. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
13. Touch to activate AUDIO MENU for various audio settings.
14. Touch to shift to MAIN MENU.
TUNER SETTINGS
TUNER SETTINGS MENU
1. Touch to select the radio frequency that suits the area located.
2. Touch to shift to TUNER MENU and start searching the radio frequency & storing the
strongest signal stations into memory. After one cycle searched, the unit starts intro
broadcasting of the preset memory stations for a few seconds.
3. Touch to select local (Local) setting for reception of strong signal stations or distance (DX)
setting for reception of weak stations at FM radio band.
4. Touch to select Stereo or Mono mode at FM radio band.
5. Touch to shift to GENERAL SETTINGS MENU for general settings of the unit.
6. Touch to shift to CAMERA SETTINGS MENU for camera settings of the unit.
7. Touch to shift to CLOCK SETTINGS MENU for clock settings of the unit.
8. Touch to shift to AUDIO SETTINGS MENU for audio settings of the unit.
9. Touch to show other settings modes of the unit.
10. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
11. Touch to activate AUDIO MENU for various audio settings.
12. Touch to shift to MAIN MENU.
[ 14 ]

CONTROLS (BACKLIGHT) SETTINGS
CONTROLS (BACKLIGHT)
SETTINGS MENU
1. Touch repeatedly to select the backlight color for illumination. When Auto mode selected,
backlight color will have cycle changed automatically.
2. Touch to shift to ILLUMINATION (VISUAL) MENU for various visual settings of the unit.
3. Touch to shift to ABOUT (SYSTEM) MENU for various system settings of the unit.
4. Touch to show other setting modes of the unit.
5. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
6. Touch to activate AUDIO MENU for various audio settings.
7. Touch to shift to MAIN MENU.
ILLUMINATION (VISUAL) SETTINGS
ILLUMINATION (VISUAL)
SETTINGS MENU
1. Touch to turn on or off of headlamp detection of the car.
ON mode: When the headlamp of the car turned on, brightness of the screen will be
dimmer.
OFF mode: When the headlamp of the car turned on, brightness of the screen will not be
affected
Remark: Headlamp detection will only be activated when the headlamp detection is turn on
and the orange wire connected with the on/off of car headlamp
2. Touch repeatedly to select the brightness and contrast of the screen.
3. Touch to shift to CONTROLS (BACKLIGHT) SETTINGS MENU for backlight color settings of
the unit.
4. Touch to shift to ABOUT (SYSTEM) MENU for various system settings of the unit.
[ 15 ]

5. Touch to show other setting modes of the unit.
6. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
7. Touch to activate AUDIO MENU for various audio settings.
8. Touch to shift to MAIN MENU.
ABOUT (SYSTEM) SETTINGS
ABOUT (SYSTEM)
SETTINGS MENU
E.U.L.A.
INTERFACE
1.
Touch to activate SCREEN CALIBRATION interface. Follow the「+」mark appeared, touch &
hold shortly on each「+」mark appeared to complete the calibration.
2. Touch to activate VERSION INTERFACE to view the software version of the unit.
3. Touch to reset the unit to its default stage. After reset, all settings and memories of the unit
will be erased.
4. Touch to turn on or off of E.U.L.A. INTERFACE on screen when the unit turn on after ignition
of the car.
5. Touch to shift to CONTROLS (BACKLIGHT) SETTINGS MENU for backlight color settings of
the unit.
6. Touch to shift to ILLUMINATION (VISUAL) MENU for various visual settings of the unit.
7. Touch to show other setting modes of the unit.
8. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
9. Touch to activate AUDIO MENU for various audio settings.
10. Touch to shift to MAIN MENU.
11. Touch to agree the End User License Agreement as stated in E.U.L.A. INTERFACE.
ON SCREEN – TUNER OPERATION
At MAIN MENU, touch on screen and shift to TUNER MENU for radio operation.
[ 16 ]

TUNER MENU
1. Touch repeatedly to select radio band (FM-1 / FM-2 / FM-3 / AM-1 / AM-2) for broadcasting.
2. Touch to turn the radio frequency upward or downward and stop for broadcasting when a
station received.
Press & hold shortly to activate manual tuning mode. At this mode, press repeatedly to fine
tune the radio frequency upward or downward.
3. Touch to start scanning the radio frequency upward and stop for broadcasting for a few
seconds when a radio station received.
4. This shows the radio stations stored in preset memory stations 1-6.
Touch any one of the preset memory station to have broadcasting of relative station.
Touch & hold shortly on any one of the preset memory station, the current broadcasting
station/frequency will be stored in the respective preset memory station.
5. At FM band, this shows:
LOC – local setting for reception of strong signal stations
DX – distance setting for reception of weak signal stations
6. At FM band and when “Stereo” has been selected, ST indicator will appear on screen when
stereo signal received. This is no indication for mono signal received.
7. This Bluetooth icon will light up if the unit has connected to a mobile phone. If no connection
made, the icon will flash.
8. Touch to activate AUDIO MENU for various audio settings.
9. Touch to shift to MAIN MENU.
ON SCREEN – DISC / USB / SD INPUT OPERATION
At MAIN MENU, touch on screen and shift to disc / USB / SD input mode for media playback.
At media playback mode and depends on the input device and playback media recorded, touch on
screen to show various PLAYBACK MENUS for operation.
Due to the law of some countries and areas, watching video is not allowed during driving. To allow
video playback, parking brake must be engaged (light green wire - parking brake input must be
connected).
[ 17 ]

The PARKING BRAKE WARNING
INTERFACE will appear on screen and no
video playback start in case the parking
brake input has not been connected and
engaged.
PARKING BRAKE WARNING
INTERFACE
DVD PLAYBACK MENU DVD PLAYBACK MENU
DVD PLAYBACK MENU VCD PLAYBACK MENU
VCD PLAYBACK MENU VIDEO PLAYBACK MENU
[ 18 ]