Botex DC-1216 User manual

DC-1216
DMX controller
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
08.01.2019, ID: 320371

Table of contents
1 General notes............................................................................................................................................... 6
1.1 Further information........................................................................................................................... 7
1.2 Notational conventions.................................................................................................................... 8
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 15
4 Installation and starting up................................................................................................................ 16
5 Connections and controls................................................................................................................... 18
6 Basics............................................................................................................................................................. 24
7 Operating.................................................................................................................................................... 27
7.1 Introduction....................................................................................................................................... 27
7.2 Enabling programming mode..................................................................................................... 27
7.3 Programming scenes...................................................................................................................... 28
7.4 Programming chase........................................................................................................................ 32
7.5 Calling up scenes.............................................................................................................................. 36
Table of contents
DC-1216 3
DMX controller

7.6 Calling chases.................................................................................................................................... 38
7.7 The MIDI functions........................................................................................................................... 39
8 Technical specications....................................................................................................................... 43
9 Plug and connection assignment.................................................................................................... 44
10 Protecting the environment.............................................................................................................. 45
Table of contents
4DC-1216
DMX controller

DC-1216 5
DMX controller

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
6DC-1216
DMX controller

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
DC-1216 7
DMX controller

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
Letterings
Displays
General notes
8DC-1216
DMX controller

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General notes
DC-1216 9
DMX controller

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General notes
10 DC-1216
DMX controller

2 Safety instructions
This device is used to control spotlights, dimmers, lighting eects equipment, Moving Heads
or other DMX-controlled devices. The device is designed for professional use and is not suit‐
able for use in households. Use the device only as described in this user manual. Any other use
or use under other operating conditions is considered to be improper and may result in per‐
sonal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DC-1216 11
DMX controller

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Safety
Safety instructions
12 DC-1216
DMX controller

NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
re.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
DC-1216 13
DMX controller

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
14 DC-1216
DMX controller

3 Features
Special features of the device:
n12 units with up to 16 DMX channels operable
n30 banks with each 8 programmable scenes
n6 Chase programmes with Loop function
n8 faders for the DMX output levels
nBuilt-in microphone for sound-control
nAutomatic programme run with tap-sync or speed control
nMIDI control
nBlackout function
nChase programming
nFade time control
Features
DC-1216 15
DMX controller

4 Installation and starting up
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
This device has been designed for 19" rack mounting. The rack ears become accessible by
unscrewing the handles on the side of the unit.
Rack mounting
Installation and starting up
16 DC-1216
DMX controller

Connect the included power supply to the power supply socket on the unit and then put the
power plug into the wall outlet. The device is immediately operational.
Connecting the power adapter
Installation and starting up
DC-1216 17
DMX controller

5 Connections and controls
Front panel
Connections and controls
18 DC-1216
DMX controller

1[SCANNERS]
12 scanners with 16 DMX channels and fader control
Press one of the scanner buttons to turn on the manual fader control. Press the scanner button again to turn it o.
The LED next to the button lights up or goes out to indicate your selection. For channel assignment, see table below.
2[SCENES]
Scene buttons
Press one of the Scene buttons to load or save scenes. A maximum of 240 scenes can be saved.
3 Fader
Use these knobs to control the intensity of channels 1-8 or 9-16, depending on whether Page A or B is selected.
4 Display
5[Program]
Enables the Programme mode
6[BANK]
Press the Up / Down buttons to choose from 30 banks.
Connections and controls
DC-1216 19
DMX controller

7[Midi/Rec]
To control MIDI operations or to record programmes
8[CHASE 1] … [CHASE 6]
To call up your programmed chases
9[BLACK OUT]
Press this button to temporarily set all DMX values to 0.
10 [Auto/Del]
Activates Auto mode or deletes scenes or chases
11 [Tapsync/Display]
Press this button to set the beat for the program sequence or to switch the display from % to numeric (0-255) indica‐
tion.
12 [Music/Bankcopy]
Activates Music mode or to copy a bank or chaser with scenes
Connections and controls
20 DC-1216
DMX controller