
BOWMAN Dispensers
20325 71st Ave NE, Suite D, Arlington, WA 98223
800.962.4660 • www.BowmanDispensers.com
©2019 BOWMAN® Manufacturing Company, Inc. All Rights Reserved. Product specications subject to change without notication. Consumables not included.
Information subject to change without notice. Dimensions are approximate. (Not to scale)
2
1
Installation
Always mount dispensers securely prior to loading with product.
Installation Instructions/Characteristics & Care
Parts included:
• Base, Column and Back Plate
Tools Required:
• No tools required to assemble dispenser
KS1020029TDSb
KS102-0029 - Installation/Characteristics & Care
Hand Sanitizer Floor Stand Plus
KS102-0029*
• To secure base to column, place base on oor, line up threaded stud on base with
threaded hole in pole. Turn pole clockwise until tight.
• Screw the threaded hole of second pole section onto the stud in the top of the
rst section. Turn clockwise until tight.
Base
Boom
pole
Care and Cleaning
Material Characteristics
Care and Construction
The powder coated nish resists
common chemicals and cleaning
agents and can be easily wiped clean
with soap and water.
Dispensers and stands made
of powder coated steel are both
attractive and functional, providing
years of service. Our powder coated
steel dispensers and stands provide
long-lasting products that hold up well
in tough environments.
Powder coated steel is ideal for
dispensers used in a healthcare or an
industrial setting. It is impact resistant
and is not effected by extremes in
temperature.
Designed for Long-Term, Heavy-Duty
Applications
Powder-Coated Steel
• Place hole in drip tray over stud from second pole section.
• Holding back plate upright, screw onto threaded stud.
• When attaching back plate, double check that drip tray is aligned with front of
back plate as shown.
• Turn drip tray and back plate together for last few turns to tighten.