Characteristics & Care
BD637-0012
Protection System Isolation Bundle
Designed for Long-Term, Heavy-Duty
Applications
Designed for Long-Term Use Designed for Long-Term, Heavy-Duty
Applications
The combinaon of copolymers
(Acrylonitrile, Butadiene, and
Styrene) gives ABS an excellent
combinaon of strength, rigidity, and
toughness.
ABS is chemical and stress-crack
resistant. It is tough, dimensionally
stable, and will hold up to long-term
use. It possesses high strength and
performance characteriscs at a
reasonable cost.
Our steel dispensers and stands
are coated with polyester powders
which makes them highly resistant to
corrosion.
Powder-coated steel is ideal for
dispensers used in a healthcare or
an industrial seng because it is
impact resistant and is not eected
by extremes in temperature.
Dispensers and stands made of
powder-coated steel are both
aracve and funconal, providing
years of service.
Copolyester resin is designed for
heavy-duty applicaons, and is used
by BOWMAN® Dispensers. We never
use acrylic in our products.
Copolyester (PETG) is typically 15-20
mes tougher than general purpose
acrylic. PETG is made to withstand
handling and reduce losses due to
breakage.
PETG resists a variety of chemicals
and commonly used cleaning agents.
It is tough and durable (not brile),
providing years of trouble-free
funconality and long life.
Clear opcal characteriscs mean
the viewer can see the content, read
text, and see true colors through
the material. It complies with FDA
regulaons for food contact.
Use mild soap and water to clean.
Petroleum-based oils, solvents, and
paints should not be used.
Standard hospital cleaning supplies
can be used.
For best results, clean by washing
the surface with a diluted soluon
of a mild, non-abrasive detergent
in cold or warm water and a non-
abrasive cloth. Standard hospital
cleaning supplies can be used.
Dry with a so cloth. Do not use any
solvent-based materials, abrasives
(e.g. Scotch-brite, steel wool),
or apply excessive force during
cleaning.
Most cleaning chemicals do not
weaken the surface or cause damage
to the material. Suggested cleaning
method is to use a so cloth, warm
water, and mild soap.
ABS Plastic
LD-037
Powder-Coated Steel
MB-600
PETG Plastic
MP-047
Material Characteristics
Care and Cleaning
BD637-0012 - Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
800.962.4660 • www.BowmanDispensers.com
BD6370012TDSc
