B+B SmartWorx SE400 Series User manual

SE400 Series
USER MANUAL

ii
SE400 SERIES
Advantech B+B SmartWorx - Americas
707 Dayton Road
Ottawa, IL 61350 USA
Phone [phone]
Fax [phone]
Advantech B+B SmartWorx - European Headquarters
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone [phone]
Fax [phone]
www.advantech-bb.com
[e-mail]
Document: SE400 Series_R0_xx15m

iii
SE400 SERIES
Product Overview......................................................... 1
Supported Models............................................................................................................................ 1
Specifications................................................................................................................................... 1
Hardware Views............................................................................................................................... 3
Front View.................................................................................................................................3
Rear View................................................................................................................................. 8
Top View...................................................................................................................................9
Bottom View............................................................................................................................10
Switch Installation...................................................... 12
Installation Guidelines.................................................................................................................... 12
Connecting Hardware.............................................................................................................12
Verifying Switch Operation ............................................................................................................12
Installing the Switch....................................................................................................................... 13
DIN Rail Mounting...................................................................................................................13
Wall-Mounting.........................................................................................................................15
Installing and Removing SFP Modules.......................................................................................... 17
Installing SFP Modules........................................................................................................... 17
Removing SFP Modules.........................................................................................................19
Connecting the Switch to Ethernet Ports.......................................................................................20
RJ45 Ethernet Cable Wiring...................................................................................................20
Power Supply Installation ..............................................................................................................20
Overview................................................................................................................................. 20
Considerations........................................................................................................................ 21
Grounding the Device.............................................................................................................22
Wiring a Relay Contact...........................................................................................................23
Wiring the Power Inputs..........................................................................................................23
Managing Switch........................................................ 26
First Time set up........................................................................................................................... 26
Overview................................................................................................................................. 26
SCADA Requirements............................................................................................................26
Administrative Interface Access..............................................................................................26
Using the Graphical (Web) Interface......................................................................................27
Configuring the Switch for Network Access............................................................................27
Configuring the Ethernet Ports ...............................................................................................27
Web Browser Configuration........................................................................................................... 29
Preparing for Web Configuration............................................................................................29
Log In.............................................................................................................................................29
Recommended Practices...............................................................................................................30
Changing Default Password...................................................................................................30
Monitoring...................................................................................................................................... 31
Device Information..................................................................................................................31
Logging Message ...................................................................................................................32
Port Monitoring ....................................................................................................................... 33
Link Aggregation..................................................................................................................... 34
LLDP Statistics ....................................................................................................................... 34
IGMP Statistics....................................................................................................................... 35
CONTENTS

iv
SE400 SERIES
System...........................................................................................................................................36
IP Settings .............................................................................................................................. 36
DHCP Client Option 82...........................................................................................................37
DHCP Auto Provision .............................................................................................................38
IPv6 Settings........................................................................................................................... 38
Management VLAN ................................................................................................................ 39
System Time........................................................................................................................... 40
L2 Switching .................................................................................................................................. 41
Port Configuration................................................................................................................... 41
Port Mirror............................................................................................................................... 42
Link Aggregation..................................................................................................................... 43
802.1Q VLAN.......................................................................................................................... 46
GARP......................................................................................................................................49
802.3az EEE...........................................................................................................................50
Multicast..................................................................................................................................51
SCADA Requirements............................................................................................................51
Jumbo Frame.......................................................................................................................... 56
Spanning Tree........................................................................................................................ 57
X-Ring Elite.............................................................................................................................62
Loopback Detection................................................................................................................63
MAC Address Table....................................................................................................................... 65
Static MAC.............................................................................................................................. 65
MAC Aging Time.....................................................................................................................66
Dynamic Forwarding Table..................................................................................................... 66
Security.......................................................................................................................................... 67
Storm Control.......................................................................................................................... 67
Port Security........................................................................................................................... 69
Protected Ports....................................................................................................................... 69
DoS Prevention....................................................................................................................... 70
Applications ............................................................................................................................ 72
802.1x..................................................................................................................................... 73
QoS................................................................................................................................................75
General................................................................................................................................... 75
QoS Basic Mode.....................................................................................................................81
Rate Limit................................................................................................................................ 82
Management.................................................................................................................................. 84
LLDP....................................................................................................................................... 84
SNMP ..................................................................................................................................... 87
Diagnostics ....................................................................................................................................91
Cable Diagnostics...................................................................................................................91
Ping Test................................................................................................................................. 92
IPv6 Ping Test ........................................................................................................................93
System Log.............................................................................................................................94
DDM........................................................................................................................................97
Tools..............................................................................................................................................98
IXM ......................................................................................................................................... 98
Backup Manager..................................................................................................................... 99
Upgrade Manager.................................................................................................................100
Dual Image ........................................................................................................................... 101
Save Configuration...............................................................................................................101
User Account........................................................................................................................ 102
Reset System .......................................................................................................................102
Reboot Device......................................................................................................................102

v
SE400 SERIES
Troubleshooting....................................................... 103
Advantech B+B Smartworx Technical support..... 103

vi
SE400 SERIES
Figure 1: Front View .......................................................................................................................... 3
Figure 2: Front View .......................................................................................................................... 4
Figure 3: Front View .......................................................................................................................... 5
Figure 4: Front View .......................................................................................................................... 6
Figure 5: System LED Panel .............................................................................................................7
Figure 6: Rear View...........................................................................................................................8
Figure 7: Rear View...........................................................................................................................9
Figure 8: Top View............................................................................................................................. 9
Figure 9: Top View...........................................................................................................................10
Figure 10: Bottom View ..................................................................................................................... 10
Figure 11: Bottom View ..................................................................................................................... 11
Figure 12: Installing the DIN-Rail Mounting Kit..................................................................................13
Figure 13: Removing the DIN-Rail.....................................................................................................14
Figure 14: Installing Wall Mount Plates ............................................................................................. 15
Figure 15: Securing Wall Mounting Screws.......................................................................................16
Figure 16: Wall Mount Installation .....................................................................................................16
Figure 17: Removing the Dust Plug from an SFP Slot ...................................................................... 17
Figure 18: Installing an SFP Transceiver...........................................................................................18
Figure 19: Attaching a Fiber Optic Cable to a Transceiver................................................................18
Figure 20: Removing a Fiber Optic Cable to a Transceiver...............................................................19
Figure 21: Removing an SFP Transceiver......................................................................................... 19
Figure 22: Ethernet Plug & Connector Pin Position...........................................................................20
Figure 23: Power Wiring for SE400 Series........................................................................................21
Figure 24: Grounding Connection......................................................................................................22
Figure 25: Terminal Receptor: Relay Contact ...................................................................................23
Figure 26: Terminal Receptor: Power Input Contacts........................................................................23
Figure 27: Removing a Terminal Block..............................................................................................24
Figure 28: Installing DC Wires in a Terminal Block ........................................................................... 24
Figure 29: Installing DC Wires in a Terminal Block ........................................................................... 24
Figure 30: Securing a Terminal Block to a Receptor.........................................................................25
Figure 31: Login Screen ....................................................................................................................29
Figure 32: Changing a Default Password..........................................................................................30
Figure 33: Monitoring > Device Information.......................................................................................31
Figure 34: Monitoring > Logging Message ........................................................................................ 32
Figure 35: Monitoring > Port Monitoring > Port Statistics.................................................................. 33
Figure 36: Monitoring > Port Monitoring > Port Utilization.................................................................33
Figure 37: Monitoring > LLDP Statistics ............................................................................................34
Figure 38: Monitoring > IGMP Statistics............................................................................................35
Figure 39: System > IP Settings........................................................................................................36
Figure 40: System > DHCP Client Option 82.....................................................................................37
Figure 41: System > DHCP Auto Provision....................................................................................... 38
Figure 42: System > IPv6 Settings .................................................................................................... 38
Figure 43: System > Management VLAN.......................................................................................... 39
Figure 44: System > System Time.....................................................................................................40
Figure 45: L2 Switching > Port Configuration....................................................................................41
Figure 46: L2 Switching > Port Mirror................................................................................................ 42
Figure 47: L2 Switching > Link Aggregation > Load Balance............................................................43
Figure 48: L2 Switching > Link Aggregation > LAG Management.....................................................43
Figure 49: L2 Switching > Link Aggregation > LAG Port Settings..................................................... 44
Figure 50: L2 Switching > Link Aggregation > LACP Priority Settings ..............................................45
Figure 51: L2 Switching > Link Aggregation > LACP Port Settings...................................................45
Figure 52: L2 Switching > 802.1Q VLAN > VLAN Management .......................................................46
Figure 53: L2 Switching > 802.1Q VLAN > PVID Settings ................................................................ 47
Figure 54: L2 Switching > 802.1Q VLAN > Port to VLAN..................................................................48
Figure 55: L2 Switching > GARP > GARP Settings........................................................................... 49
LIST OF FIGURES

vii
SE400 SERIES
Figure 56: L2 Switching > GARP > GVRP Settings........................................................................... 50
Figure 57: L2 Switching > 802.3az EEE............................................................................................50
Figure 58: L2 Switching > Multicast > Multicast Filtering................................................................... 51
Figure 59: L2 Switching > Multicast > IGMP Snooping > IGMP Settings..........................................52
Figure 60: L2 Switching > Multicast > IGMP Snooping > IGMP Querier........................................... 52
Figure 61: L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups ................................. 53
Figure 62: L2 Switching > Multicast > MLD Snooping > MLD Settings .............................................54
Figure 63: L2 Switching > Multicast > MLD Snooping > MLD Querier ..............................................55
Figure 64: L2 Switching > Multicast > MLD Snooping > MLD Static Group ...................................... 55
Figure 65: L2 Switching > Jumbo Frame........................................................................................... 56
Figure 66: L2 Switching > Spanning Tree > STP Global Settings.....................................................57
Figure 67: L2 Switching > Spanning Tree > STP Port Settings.........................................................58
Figure 68: L2 Switching > Spanning Tree > STP Bridge Settings.....................................................59
Figure 69: L2 Switching > Spanning Tree > STP Port Advanced Settings........................................ 60
Figure 70: L2 Switching > Spanning Tree > MST Config Identification ............................................. 60
Figure 71: L2 Switching > Spanning Tree > MST Instance ID Settings............................................. 61
Figure 72: L2 Switching > Spanning Tree > MST Instance Priority Settings..................................... 61
Figure 73: L2 Switching > X-Ring Elite > X-Ring Elite Settings.........................................................62
Figure 74: L2 Switching > X-Ring Elite > X-Ring Elite Groups ..........................................................63
Figure 75: L2 Switching > Loopback Detection > Global Settings.....................................................63
Figure 76: L2 Switching > Loopback Detection > Port Settings.........................................................64
Figure 77: MAC Address Table > Static MAC ...................................................................................65
Figure 78: MAC Address Table > MAC Aging Time..........................................................................66
Figure 79: MAC Address Table > Dynamic Forwarding Table .......................................................... 66
Figure 80: Security > Storm Control > Global Settings......................................................................67
Figure 81: Security > Storm Control > Port Settings..........................................................................68
Figure 82: Security > Port Security.................................................................................................... 69
Figure 83: Security > Protected Ports................................................................................................ 69
Figure 84: Security > DoS Prevention > DoS Global Settings........................................................... 70
Figure 85: Security > DoS Prevention > DoS Port Settings...............................................................72
Figure 86: Security > Applications > HTTP........................................................................................72
Figure 87: Security > 802.1x > 802.1x Settings.................................................................................73
Figure 88: Security > 802.1x > 802.1x Port Configuration.................................................................74
Figure 89: QoS > General > QoS Properties..................................................................................... 75
Figure 90: QoS > General > QoS Settings ........................................................................................76
Figure 91: QoS > General > QoS Scheduling ...................................................................................77
Figure 92: QoS > General > CoS Mapping........................................................................................78
Figure 93: QoS > General > DSCP Mapping.....................................................................................79
Figure 94: QoS > General > IP Precedence Mapping....................................................................... 80
Figure 95: QoS > QoS Basic Mode > Global Settings.......................................................................81
Figure 96: QoS > QoS Basic Mode > Port Settings........................................................................... 81
Figure 97: QoS > Rate Limit > Ingress Bandwidth Control................................................................82
Figure 98: QoS > Rate Limit > Egress Bandwidth Control ................................................................ 83
Figure 99: QoS > Rate Limit > Egress Queue................................................................................... 83
Figure 100: Management > LLDP > LLDP System Settings ...............................................................84
Figure 101: Management > LLDP > LLDP Port Settings > LLDP Port Configuration..........................85
Figure 102: Management > LLDP > LLDP Port Settings > Optional TLVs Selection..........................85
Figure 103: Management > LLDP > LLDP Port Settings > VLAN Name TLV VLAN Selection........... 86
Figure 104: Management > LLDP > LLDP Remote Device Info..........................................................86
Figure 105: Management > SNMP > SNMP Settings.......................................................................... 87
Figure 106: Management > SNMP > SNMP Community .................................................................... 88
Figure 107: Management > SNMP > SNMP User Settings................................................................. 89
Figure 108: Management > SNMP > SNMP Trap ...............................................................................90
Figure 109: Diagnostics > Cable Diagnostics......................................................................................91
Figure 110: Diagnostics > Ping Test....................................................................................................92
Figure 111: Diagnostics > IPv6 Ping Test............................................................................................93
Figure 112: Diagnostics > System Log > Logging Service..................................................................94
Figure 113: Diagnostics > System Log > Local Logging ..................................................................... 95

viii
SE400 SERIES
Figure 114: Diagnostics > System Log > System Log Server............................................................. 96
Figure 115: Diagnostics > DDM........................................................................................................... 97
Figure 116: Diagnostics > DDM > Diagnostic Alarm Information ........................................................97
Figure 117: Tools > IXM ......................................................................................................................98
Figure 118: Tools > Backup Manager..................................................................................................99
Figure 119: Tools > Upgrade Manager..............................................................................................100
Figure 120: Tools > Dual Image ........................................................................................................101
Figure 121: Tools > User Account.....................................................................................................102

ix
SE400 SERIES
Table 1: Standard Models ................................................................................................................ 1
Table 2: Wide Temperature Models.................................................................................................1
Table 3: Specifications ..................................................................................................................... 1
Table 4: Front View .......................................................................................................................... 3
Table 5: Front View .......................................................................................................................... 4
Table 6: Front View .......................................................................................................................... 5
Table 7: Front View .......................................................................................................................... 6
Table 8: System LED Panel .............................................................................................................7
Table 9: Rear View...........................................................................................................................8
Table 10: Rear View........................................................................................................................... 9
Table 11: Top View.............................................................................................................................9
Table 12: Top View........................................................................................................................... 10
Table 13: Bottom View ..................................................................................................................... 10
Table 14: Bottom View ..................................................................................................................... 11
Table 15: Pin Definition .................................................................................................................... 20
Table 16: Monitoring > Device Information.......................................................................................31
Table 17: Monitoring > Logging Message ........................................................................................ 32
Table 18: Monitoring > Port Monitoring > Port Statistics.................................................................. 33
Table 19: Monitoring > Port Monitoring > Port Utilization................................................................. 33
Table 20: Monitoring > LLDP Statistics ............................................................................................34
Table 21: Monitoring > IGMP Statistics............................................................................................ 35
Table 22: System > IP Settings........................................................................................................ 36
Table 23: System > DHCP Client Option 82.....................................................................................37
Table 24: System > DHCP Auto Provision....................................................................................... 38
Table 25: System > IPv6 Settings .................................................................................................... 38
Table 26: System > Management VLAN.......................................................................................... 39
Table 27: System > System Time.....................................................................................................40
Table 28: L2 Switching > Port Configuration.................................................................................... 41
Table 29: L2 Switching > Port Mirror................................................................................................42
Table 30: L2 Switching > Link Aggregation > Load Balance............................................................43
Table 31: L2 Switching > Link Aggregation > LAG Management.....................................................43
Table 32: L2 Switching > Link Aggregation > LAG Port Settings.....................................................44
Table 33: L2 Switching > Link Aggregation > LACP Priority Settings ..............................................45
Table 34: L2 Switching > Link Aggregation > LACP Port Settings...................................................45
Table 35: L2 Switching > 802.1Q VLAN > VLAN Management ....................................................... 46
Table 36: L2 Switching > 802.1Q VLAN > PVID Settings ................................................................47
Table 37: L2 Switching > 802.1Q VLAN > Port to VLAN..................................................................48
Table 38: L2 Switching > GARP > GARP Settings...........................................................................49
Table 39: L2 Switching > GARP > GVRP Settings...........................................................................50
Table 40: L2 Switching > 802.3az EEE............................................................................................50
Table 41: L2 Switching > Multicast > Multicast Filtering...................................................................51
Table 42: L2 Switching > Multicast > IGMP Snooping > IGMP Settings.......................................... 52
Table 43: L2 Switching > Multicast > IGMP Snooping > IGMP Querier...........................................53
Table 44: L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups ................................. 53
Table 45: L2 Switching > Multicast > MLD Snooping > MLD Settings .............................................54
Table 46: L2 Switching > Multicast > MLD Snooping > MLD Querier ..............................................55
Table 47: L2 Switching > Multicast > MLD Snooping > MLD Static Group ......................................55
Table 48: L2 Switching > Jumbo Frame........................................................................................... 56
Table 49: L2 Switching > Spanning Tree > STP Global Settings..................................................... 57
Table 50: L2 Switching > Spanning Tree > STP Port Settings......................................................... 58
Table 51: L2 Switching > Spanning Tree > STP Bridge Settings.....................................................59
Table 52: L2 Switching > Spanning Tree > STP Port Advanced Settings........................................60
Table 53: L2 Switching > Spanning Tree > MST Config Identification ............................................. 60
Table 54: L2 Switching > Spanning Tree > MST Instance ID Settings.............................................61
Table 55: L2 Switching > Spanning Tree > MST Instance Priority Settings.....................................61
LIST OF TABLES

x
SE400 SERIES
Table 56: L2 Switching > X-Ring Elite > X-Ring Elite Settings.........................................................62
Table 57: L2 Switching > Loopback Detection > Global Settings.....................................................63
Table 58: L2 Switching > Loopback Detection > Port Settings......................................................... 64
Table 59: MAC Address Table > Static MAC ...................................................................................65
Table 60: MAC Address Table > MAC Aging Time..........................................................................66
Table 61: MAC Address Table > Dynamic Forwarding Table .......................................................... 66
Table 62: Security > Storm Control > Global Settings...................................................................... 67
Table 63: Security > Storm Control > Port Settings..........................................................................68
Table 64: Security > Port Security.................................................................................................... 69
Table 65: Security > Protected Ports................................................................................................ 69
Table 66: Security > DoS Prevention > DoS Global Settings...........................................................71
Table 67: Security > DoS Prevention > DoS Port Settings...............................................................72
Table 68: Security > Applications > HTTP........................................................................................72
Table 69: Security > 802.1x > 802.1x Settings.................................................................................73
Table 70: Security > 802.1x > 802.1x Port Configuration................................................................. 74
Table 71: QoS > General > QoS Properties..................................................................................... 75
Table 72: QoS > General > QoS Settings ........................................................................................76
Table 73: QoS > General > QoS Scheduling ...................................................................................77
Table 74: QoS > General > CoS Mapping........................................................................................78
Table 75: QoS > General > DSCP Mapping.....................................................................................79
Table 76: QoS > General > IP Precedence Mapping.......................................................................80
Table 77: QoS > QoS Basic Mode > Global Settings.......................................................................81
Table 78: QoS > QoS Basic Mode > Port Settings........................................................................... 81
Table 79: QoS > Rate Limit > Ingress Bandwidth Control................................................................82
Table 80: QoS > Rate Limit > Egress Bandwidth Control ................................................................ 83
Table 81: QoS > Rate Limit > Egress Queue................................................................................... 83
Table 82: Management > LLDP > LLDP System Settings ...............................................................84
Table 83: Management > LLDP > LLDP Port Settings > LLDP Port Configuration..........................85
Table 84: Management > LLDP > LLDP Port Settings > Optional TLVs Selection.......................... 85
Table 85: Management > LLDP > LLDP Port Settings > VLAN Name TLV VLAN Selection...........86
Table 86: Management > LLDP > LLDP Remote Device Info..........................................................86
Table 87: Management > SNMP > SNMP Settings..........................................................................87
Table 88: Management > SNMP > SNMP Community ....................................................................88
Table 89: Management > SNMP > SNMP User Settings................................................................. 89
Table 90: Management > SNMP > SNMP Trap ...............................................................................90
Table 91: Diagnostics > Cable Diagnostics...................................................................................... 91
Table 92: Diagnostics > Ping Test....................................................................................................92
Table 93: Diagnostics > IPv6 Ping Test............................................................................................93
Table 94: Diagnostics > System Log > Logging Service..................................................................94
Table 95: Diagnostics > System Log > Local Logging .....................................................................95
Table 96: Diagnostics > System Log > System Log Server.............................................................96
Table 97: Diagnostics > DDM...........................................................................................................97
Table 98: Diagnostics > DDM > Diagnostic Alarm Information ........................................................ 97
Table 99: Tools > IXM ......................................................................................................................98
Table 100: Tools > Backup Manager.................................................................................................. 99
Table 101: Tools > Upgrade Manager.............................................................................................. 100
Table 102: Tools > Dual Image ........................................................................................................101
Table 103: Tools > User Account..................................................................................................... 102

xi
SE400 SERIES
CE
This product has passed the CE test for environmental specifications when shielded cables
are used for external wiring. We recommend the use of shielded cables. This kind of cable is
available from Advantech. Please contact your local supplier for ordering information.
This product has passed the CE test for environmental specifications. Test conditions for
passing included the equipment being operated within an industrial enclosure. In order to pro-
tect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we
strongly recommend the use of CE-compliant industrial enclosure products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
Safety Instructions
Read these safety instructions carefully.
Keep this user manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use damp cloth. Do not
use liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and
must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
may cause damage.
The openings on the enclosure are for air convection. Protect the equipment from over-
heating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is correct before connecting the equipment to
the power outlet.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
All cautions and warning on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over voltage.
Never pour any liquid into an opening. This may cause fire or electrical shock.
Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
– The power cord or plug is damaged.
– Liquid has penetrated into the equipment.
DECLARATION OF CONFORMITY

xii
SE400 SERIES
– The equipment has been exposed to moisture.
– The equipment does not work well, or you cannot get it to work according to the user
manual
– The equipment has been dropped and damaged.
– The equipment has obvious signs of breakage.
Instructions for installation in a pollution Degree 2 environment or equivalent statement.
PoE requirements:
This product was in-door used and not connected to outside plant, so user manual shall
have the description as below or equivalent: “The equipment is to be connected only to
PoE networks without routing to the outside plant.”
Do NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE
TEMPERATURE MAY GO BELOW -40°C(-40°F) OR ABOVE 75°C(167°F) THIS COULD
DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED
ENVIRONMENT.
Effective for products of Advantech B+B SmartWorx shipped on or after May 1, 2013, Advan-
tech B+B SmartWorx warrants that each such product shall be free from defects in material
and workmanship for its lifetime. This limited lifetime warranty is applicable solely to the origi-
nal user and is not transferable. Power supplies are exempt from the limited lifetime warranty
and are covered by a six year warranty.
This warranty is expressly conditioned upon proper storage, installation, connection, operation
and maintenance of products in accordance with their written specifications.
Pursuant to the warranty, within the warranty period, Advantech B+B SmartWorx, at its option
will:
1. Replace the product with a functional equivalent;
2. Repair the product; or
3. Provide a partial refund of purchase price based on a depreciated value.
Products of other manufacturers sold by Advantech B+B SmartWorx are not subject to any
warranty or indemnity offered by Advantech B+B SmartWorx, but may be subject to the war-
ranties of the other manufacturers.
Notwithstanding the foregoing, under no circumstances shall Advantech B+B SmartWorx
have any warranty obligations or any other liability for: (i) any defects resulting from wear and
tear, accident, improper use by the buyer or use by any third party except in accordance with
the written instructions or advice of the Advantech B+B SmartWorx or the manufacturer of the
products, including without limitation surge and overvoltage conditions that exceed specified
ratings, (ii) any products which have been adjusted, modified or repaired by any party other
than Advantech B+B SmartWorx or (iii) any descriptions, illustrations, figures as to perfor-
mance, drawings and particulars of weights and dimensions contained in the Advantech B+B
SmartWorx' catalogs, price lists, marketing materials or elsewhere since they are merely
intended to represent a general idea of the products and do not form part of this price quote
and do not constitute a warranty of any kind, whether express or implied, as to any of the
Advantech B+B SmartWorx’s products.
THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH
THE EXPRESS WARRANTY SET FORTH ABOVE IS ADVANTECH B+B SMARTWORX
SOLE OBLIGATION UNDER THIS WARRANTY. THE WARRANTY CONTAINED IN THIS
SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND
INDEMNITIES ARE EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION (I)
THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND OF MER-
PRODUCT WARRANTY – LIMITED LIFETIME

xiii
SE400 SERIES
CHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT
INFRINGE OR VIOLATE THE INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD
PARTY. IN NO EVENT SHALL ADVANTECH B+B SMARTWORX BE LIABLE FOR LOSS OF
BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS
OR GOODWILL OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL
DAMAGES. ADVANTECH B+B SMARTWORX SHALL DISREGARD AND NOT BE BOUND
BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY OTHER
PERSON, INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELL-
ERS OR DEALERS OF ADVANTECH B+B SMARTWORX WHICH ARE INCONSISTENT
WITH THE WARRANTY, SET FORTH ABOVE.
RETURNS POLICY
Eligible items returned within 30 days of purchase qualify for a full refund (less shipping
charges). Advantech B+B SmartWorx has the option to accept returns of products 30 days
after the date of purchase and such returns are subject to a restocking fee of up to 20%. Soft-
ware is not returnable if opened. Advantech B+B SmartWorx will not accept returns of prod-
ucts that were modified by a customer. All custom orders are non-returnable and non-
cancelable.
REPAIR SERVICE: We offer a repair service for our products. Please call, FAX, or e-mail to
request a Return Material Authorization (RMA) number and routing instructions. Shipping
charges and any duties, taxes or brokerage fees are the customer's responsibility.
RETURN AND REPAIR CONTACT INFORMATION
Phone: [phone]:00 AM - 7:00 PM CST
Fax: [phone]
Email: [email protected]
WARNINGS, CAUTIONS AND NOTES
Warning! Warnings indicate conditions, which if not observed, can cause personal injury!
Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g.
There is a danger of a new battery exploding if it is incorrectly installed. Do not
attempt to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type recommended by the manufacturer. Discard
used batteries according to the manufacturer's instructions.
Note! Notes provide optional additional information.

1
SE400 SERIES
Supported Models
Standard Models:
Wide Temperature Models:
Specifications
PRODUCT OVERVIEW
Table 1: Standard Models
SE408 SEC410-2SFP SE416
SEC418-2SFP
Table 2: Wide Temperature Models
SE408-EI-T SE408-PN-T SE408-PNMA-T
SE408-T SEC410-2SFP-EI-T SEC410-2SFP-PN-T
SEC410-2SFP-T SE416-EI-T SE416-PN-T
SE416-T SEC418-2SFP-EI-T SEC418-2SFP-PN-T
SEC418-2SFP-T
Table 3: Specifications
Specifications Description
Interface I/O Port SE408 series: 8 x 10/100BaseT(X)
SE416 series: 16 x 10/100BaseT(X)
SEC410 series: 8 x 10/100BaseT(X) + 2 x 10/100Base-
T(X) or 100Base-FX SFP
SEC418 series: 16 x 10/100BaseT(X) + 2 x 10/100Base-
T(X) or 100Base-FX SFP
Power Connector 6-pin screw Terminal Block (including relay)
Physical Enclosure Metal Shell
Protection Class IP30
Installation DIN-Rail and Wall-Mount
Dimensions
(W x H x D) SE408 series: 43mm x 120mm x 84mm (1.69in x 4.72in x 3.3in)
SE416 series: 74mm x 120mm x 84mm (2.91in x 4.72in x
3.3in)
SEC410 series: 74mm x 120mm x 84mm (2.91in x 4.72in
x 3.3in
SEC418 series: 74mm x 120mm x 84mm (2.91in x 4.72in
x 3.3in
LED Display System LED PWR1, PWR2, P-Fail, Loop detection
PoE
Port LED Link / Speed / Activity

2
SE400 SERIES
Environment Operating
Temperature Standard Temperature: -10°C ~ 60°C (14°F ~ 140°F) Wide Temperature: -40°C ~ 75°C (-40°F ~ 167°F)
Storage
Temperature -40°C ~ 85° C (-40°F ~ 185° F)
Ambient Relative
Humidity 10 ~ 95% (non-condensing)
Switch Properties MAC Address 8K entries
Switching
Bandwidth SE408 series : 1.6Gbps SE416 series : 3.2Gbps
SEC410 series: 5.6Gbps
SEC418 series: 7.2Gbps
Power Power
Consumption SE408 series: 5.2 watts SE416 series: 8 watts
SEC410 series: 5.8 watts
SEC418 series: 8.2 watts
Power Input 12V ~ 48V (8.4V ~ 52.8V), redundant dual inputs
Certifications Safety IEC/EN 60950-1, UL508
Class 1 Division 2, IECEx, ATEX
EMC CE, FCC
EMI EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15 Subpart
B Class A
EMS EN 55024/ EN 61000-6-2
EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Table 3: Specifications (Continued)
Specifications Description

3
SE400 SERIES
Hardware Views
The following view applies to SE408 series.
Figure 1: Front View
Front View
Table 4: Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 7 for further details.
2 ETH port Eight 10/100BaseT(X) ports.
3 LNK/ACT LED Link activity LED.
4 Speed LED Gigabit Ethernet:
– Green: 1000M
– Amber: 100M
–Off:10M
Fast Ethernet:
– Amber: 100M
–Off:10M
8
7
6
5
3
4
1
2
P2
P1
P-Fail
Loop
10/100
SE408
1
2
3
4

4
SE400 SERIES
The following view applies to SE416 series.
Figure 2: Front View
Table 5: Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 7 for further details.
2 ETH port Sixteen 10/100BaseT(X) ports.
3 LNK/ACT LED Link activity LED.
4 Speed LED Fast Ethernet:
– Amber: 100M
–Off:10M
P2
P1
P-Fail
Loop
8
10/100 10/100
SE416
7
6
5
3
4
1
2
16
15
14
13
11
12
9
10
LNK
SPD
1
2
3
4

5
SE400 SERIES
The following view applies to SEC410 series.
Figure 3: Front View
Table 6: Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 7 for further details.
2 ETH port Eight 10/100BaseT(X) ports + two 100/1000BaseT(X) combo ports.
3 LNK/ACT LED Link activity LED.
4 Speed LED Gigabit Ethernet:
– Green: 1000M
– Amber: 100M
–Off:10M
5 ETH port Two 10/100/1000BaseT(X) ports.
6 ETH port Two 100/1000Base-FX SFP ports.
8
7
6
5
3
4
1
2
10
9
910
LNK/ACT
P2
P1
P-F
Loop
10/100
10/100/1000
10/100/1000
SEC410-2SFP
LNK
SPD
1
2
6
3
45
5
6

6
SE400 SERIES
The following view applies to SEC418 series.
Figure 4: Front View
Table 7: Front View
No. Item Description
1 System LED panel See “System LED Panel” on page 7 for further details.
2 ETH port Sixteen 10/100BaseT(X) ports + two 100/1000BaseT(X) combo ports.
3 LNK/ACT LED Link activity LED.
4 Speed LED Gigabit Ethernet:
– Green: 1000M
– Amber: 100M
–Off:10M
5 ETH port Two 10/100/1000BaseT(X) ports.
6 ETH port Two 100/1000Base-FX SFP ports.
8
7
6
5
3
4
1
2
16
15
14
13
11
12
18
17
9
10
P2
P1
P-F
Loop
10/100/1000
10/100
10/100
SEC418-2SFP
1
2
5
3
4
6

7
SE400 SERIES
System LED Panel
Figure 5: System LED Panel
Table 8: System LED Panel
No. LED Name LED Color Description
1 PW1 LED Solid green Powered up.
Off Powered down or not installed.
2 PW2 LED Solid green Powered up.
Off Powered down or not installed.
3 P-Fail Solid red When PW1 or PW2 is disconnected, the LED lights.
Off When PW1 and PW2 is connected, the LED is off.
4 Loop Solid red When loop detected, the LED lights.
Off No loop detected.
P2
P1
P-Fail
Loop
1234