H3C AR19 Series User manual

1
Quick Start (V1.00)
1 Product Overview
Quidway AR19 series routers, developed by Hangzhou H3C Technologies Co., Ltd.,
are multifunctional access routers which are oriented to small and medium business
(SMB), enterprise branches, and home offices, and are designed to serve
high-quality orderwire and commercial networks.
MSR 20-1X series routers include the following models.
Model Description
QuidwayAR 19-10
Four 10/100 Mbps L2 Ethernet ports (LAN)
One 10/100 Mbps Ethernet port (WAN)
One USB port
One console/AUX port
QuidwayAR 19-11
Four 10/100 Mbps L2 Ethernet ports (LAN)
One 10/100 Mbps Ethernet port (WAN)
One USB port
One Console/AUX port
One SA port
QuidwayAR 19-12
Four 10/100 Mbps L2 Ethernet ports (LAN)
One 10/100 Mbps Ethernet port (WAN)
One USB port
One Console/AUX port
One E1/T1 port

2
Model Description
QuidwayAR 19-13
Four 10/100 Mbps L2 Ethernet ports (LAN)
One 10/100 Mbps Ethernet port (WAN)
One USB port
One console/AUX port
One G.SHDSL port
One ISDN BRI S/T port
QuidwayAR 19-15
Four 10/100 Mbps L2 Ethernet ports (LAN)
One 10/100 Mbps Ethernet port (WAN)
One USB port
One console/AUX port
One ADSL port
One ISDN BRI S/T port or one AM port
2 Connection
Figure 1 Quidway AR 19-1x series routers connection diagram

3
3 Related Documentation
Table 1 lists the manuals related to Quidway AR 19-1x series routers. You can get
them from the delivered CDs or the website at http//:www.h3c.com.
Table 1 Related manuals
Manual Description
Quidway AR 19-1x Series Routers
Installation Manual
Details the hardware specifications,
installation, configuration, maintenance,
and troubleshooting of H3C MSR 20-1X
Series Routers.
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
4 Technical Support
Hangzhou H3C Technologies Co., Ltd. provides customers with comprehensive
technical support and service.
If you purchase an Quidway AR 19-1x products from the sales agent of Hangzhou
H3C Technologies Co., Ltd., contact our sales agent or technical personnel.
Address: 310 Liuhe Road, Zhijiang Science Park,
Hangzhou, Zhejiang Province, P. R. China
Postal Code: 310053
Website: http://www.h3c.com
E-mail: [email protected]
BOM: 3101A09P
OEM Installation Guide:
This device is intended only form OEM integrators under the following conditions:
1) The antenna must be installed such that 20cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the
final product. In these circumstances, the OEM integrator will be responsible for
re-evaluating the end product (including the transmitter) and obtaining a separate
FCC authorization.

4
15.21 Regulatory information:
Installation and use of this Wireless LAN device must be in strict accordance with the
instructions included in the user documentation provided with the product. Any
changes or modifications (including the antennas) made to this device that are not
expressly approved by the manufacturer may void the user’s authority to operate the
equipment. The manufacturer is not responsible for any radio or television
interference caused by unauthorized modification of this device, or the substitution of
the connecting cables and equipment other than manufacturer specified. It is the
responsibility of the user to correct any interference caused by such unauthorized
modification, substitution or attachment. Manufacturer and its authorized resellers or
distributors will assume no liability for any damage or violation of government
regulations arising from failing to comply with these guidelines.
15.199a)(3)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
15.105 FCC Reuqirements:
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.