Digi TransPort WR64 User manual

Welcome to the Internet of getting
things done
Digi provides M2M connectivity for industries
where things don't come easily. Where
operations are spread over vast areas or involve
complex, even hazardous, processes. No matter
where your M2M products and systems go to
work, Digi helps ensure that they are
relentlessly reliable and secure. Every device.
Every connection. Everywhere.
CONNECTWITHCONFIDENCE.
Digi TransPort WR64 product benefits
•Wired Gigabit Ethernet (4-port) for onboard
systems
•Segmented private versus public data
communication across dual 600 Mbps
CAT 11 cellular
•Video and vehicle data offload over 1.7 Gbps
802.11ac Wi-Fi backhaul
•Passenger Wi-Fi over 867 Mbps 802.11ac
access point
For hardware safety information, go to Digi
TransPort WR64 Hardware Reference. For
product information, go to www.digi.com/wr64
or scan the following QR code.
Digi TransPort® WR64 |Quick Start Guide
© 2017 Digi International Inc. All rights reserved. 90002270-88 A
1 Connect
SIM cards (not included)
Internet PC Power cord

MANAGEDEVICESREMOTELY
Digi Remote Manager
Digi Remote Manager provides an efficient,
cost-effective way to remotely monitor and
manage your devices. Perform remote
configuration and troubleshooting of your Digi
TransPort intelligent routers over 3G/4G LTE,
while meeting your security requirements and
enjoying greater reliability.
Contact us for a free trial.
Digiservices and support
Purchase with confidence knowing that Digi is
always available to serve you with expert
technical support. Visit Digi at www.digi.com/
support.
Simplified EU Declaration of Conformity
We, Digi International Inc. of 11001 Bren Road
East, Minnetonka, MN 55343, USA declare that
this radio equipment is in compliance with EU
Directive 2014/53/EU (RE) and EU Directive
2011/65/EU (RoHS2). The full text of the EU
Declaration of Conformity is available at the
following Internet address: www.digi.com/
resources/certifications.
© 2017 Digi International Inc. All rights reserved.
Digi TransPort® WR64 |Quick Start Guide
2 Configure
a. Power on the TransPort WR64.
Indicator LEDs blink to show status during startup.
b. Wait for the power LED to stop blinking.
c. View the printed label on the bottom of your device and note the
default user name and unique password for your device. You will
need the password when you log in for the first time.
d. Open a browser and go to 192.168.1.1.
Both HTTP and HTTPS are supported.
e. Click Start Device Setup to run the Getting Started Wizard.
f. Log in to the device using the default user name admin and the
unique password for your device.