Bradley FREQUENCY FL-1H User manual

P.O. Box 309, Menomonee Falls, WI USA 53052-0309
PHONE 800.BRADLEY (800.272.3539) FAX [phone]
bradleycorp.com
Installation
215-1511 Rev. E; ECM 09-11-0006
© 2009 Bradley Corporation
Page 1 of 25 7/14/09
FL-1H, FL-1L
Frequency®Lavatory System
Système de lavabos Frequency®
Sistema de lavabo Frequency®
U.S. Pat. No. Des. 507,634
Table of Contents
Pre-Installation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Rough-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Lavatory Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Drain and Tailpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Faucet Battery Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Tankless Water Heater . . . . . . . . . . . . . . . . . . . . . . . . . . 8
P-trap and Trap Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Cleaning and Maintenance Instructions for Terreon . . . . . . . . . . . 9
Table des matières
Avant l’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Composants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–13
Mises en place des canalisations . . . . . . . . . . . . . . . . . . . . . . . . 14
Lavabo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Drain et raccord droit de vidange . . . . . . . . . . . . . . . . . . . . . . . . 16
Compartiment des piles de robinets . . . . . . . . . . . . . . . . . . . . . . 16
Chauffage d’eau sans réservoir en option. . . . . . . . . . . . . . . . . . 16
Siphon et Couvercles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Instructions de nettoyage et d’entretien pour Terreon . . . . . . . . . 17
Contenido
Información previa a la instalación . . . . . . . . . . . . . . . . . . . . . . . 18
Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Dimensiones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–21
Colocación de tuberías empotradas . . . . . . . . . . . . . . . . . . . . . . 22
Montaje del lavabo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Desagüe y pieza inferior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Caja de batería de la llave. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Calentador de agua sin tanque opcional. . . . . . . . . . . . . . . . . . . 24
Sifón y cubiertas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Instrucciones de limpieza y mantenimiento para Terreon . . . . . . 25
FL-1H
FL-1L

FL-1H, FL-1L Installation
27/14/09 Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006
IMPORTANT!
Read this entire installation manual to ensure proper installation.
When finished with the installation, file this manual with the owner or
maintenance department. Compliance and conformity to local codes
and ordinances is the responsibility of the installers.
Separate parts from packaging and make sure all parts are accounted
for before discarding any packaging material. If any parts are
missing, do not begin installation until you obtain the missing parts.
Make sure that all water supply lines have been flushed and then
completely turned off before beginning installation. Debris in supply
lines can cause valves to malfunction.
Turn OFF electrical power to the electrical outlets, then unplug all
electrical units prior to installation. Electrical power MUST remain off
until installation is complete. After installation is complete, turn on
the water supply first, then turn on the electrical power.
Hardware provided by installer must be appropriate for wall
construction. Wall anchors must have a minimum pull-out rating of
1,000 lbs.
Product warranties may be found under “Products” on our Web site
at bradleycorp.com.
THIS
SIDE
UP
Packing List
•
•
•
•
Installation
Supplies Required:
• (4) 3/8" wall anchors, bolts and 1" min. O.D. washers to mount main frame and bowl to wall (minimum pull-out rating of
1,000 lbs.)
• (2) #10 wall anchors (for optional mixing valve/bracket mounting)
• 1/2" NPT hot/cold or tempered supply piping
• 1-1/2" NPT drain piping
• OPTIONAL: 110 volt GFCI protected electrical outlet for 100–120 VAC plug-in transformer (for Bradley Faucets)
• OPTIONAL: 240/208 or 277 volts for electric tankless water heater

Installation FL-1H, FL-1L
Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006 7/14/09 3
Components
Bowl FL-1L (187-273)
Contact Bradley for
color options
Bowl FL-1H (187-274)
Contact Bradley for
color options
Prepack Trap Cover FL-1
(S45-2108 - Gray)
(S45-2108A - Putty)
(S45-2108B - Coal)
Soap Dispenser
Model 6334
Support Bracket
(140-823L)
#10 Washer
(142-002AT)
#10-24 Screw
(P18-054)
Optional
Single-Unit
Adapter
(153-443)
Offset Strainer
(269-1751)
Vernatherm™
TMV Assembly
Screw
(P18-054)
Optional Tankless Water Heater
(269-1765 - EX55TMLB, 240/208 volts)
(269-1766 - EX60TMLB, 277 volts)
Bracket
(140-934)
Valve
(S01-524)
Aerada™ 1200 Series
CS Faucet
Model S53-315
P-Trap
(269-1697)
Optional
Tempered Line Stop/Strainer/Check
Valve (S60-003)
1/2" Flex Hose
(269-653) 1/2" Nipple
(113-006DH)
Support Bracket
(140-823R)

FL-1H, FL-1L Installation
47/14/09 Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006
Dimensions - Front and Top Views
FL-1H shown
FL-1L is similar
FL-1L FL-1H
7¾"
(197mm)
22"
(559mm)
37¾"
(959mm)
30"
(762mm)
36"
(914mm)
34"
(864mm)
30"
(762mm)
12¼"
(311mm)
37¾"
(959mm)
30"
(762mm)
32"
(813mm)
34" ADA
(864mm)
30" ADA
(762mm)
12¼" ADA
(311mm)

Installation FL-1H, FL-1L
Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006 7/14/09 5
TAS TAS
Dimensions - Side Views
37¾"
(959mm)
27"
(686mm)
22" (559mm)
19¾" (502mm)
14"
(356mm)
12¼"
(311mm)
30"
(762mm)
36"
(914mm)
Rim Height
22" (559mm)
19¾" (502mm)
22" (559mm)
19¾" (502mm)
45⁄8"
(117mm)
45⁄8"
(117mm) 45⁄8"
(117mm)
37¾"
(959mm)
34¾"
(883mm)
12¼"
(311mm) 9¼"
(235mm)
14"
(356mm)
14"
(356mm)
30"
(762mm)
22" (559mm)
19¾" (502mm)
45⁄8"
(117mm)
14"
(356mm)
22" (559mm)
19¾" (502mm)
45⁄8"
(117mm)
14"
(356mm)
28"
(711mm)
35¾"
(908mm)
33¾"
(857mm)
10¼"
(260mm)
8¼" (210mm)
26"
(660mm)
Standard
Height Juvenile
Height
Ages 6–12
TAS Height
Grades Pre-K
through 5 or 6
TAS Height
Grades 6 through
8 or 9
34"
(864mm)
Rim
Height
31"
(787mm)
Rim
Height
30"
(762mm)
Rim
Height
32"
(813mm)
Rim
Height
FL-1L
FL-1H

FL-1H, FL-1L Installation
67/14/09 Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006
E
D
D
BB
A
A
AA
HC
W
A
A
B
E
C
A
A
B
D
D
W
H
1Rough-Ins
CODE DESCRIPTION QTY.
A 3/8" Lav Deck Anchors with a Minimum Pull-Out Force of 1,000 lbs. 4
B #10 Wall Anchors/Fasteners for Mounting Trap Covers 2
H, C 1/2" NPT Hot/Cold Supplies, Stub-Out 2" From Wall 1
D #10 Wall Anchors/Fasteners for Valve Mounting 2
E 110v GFI Protected Electrical Outlet 1
W 1-1/2" NPT Drain, Stub-Out 2" from Wall 1
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FOR CODES
A–E, H, C and W FIXTURE STYLE
34" None Standard Height
32" Subtract 2" TAS, Grades 6 through 8 or 9
31" Subtract 3" TAS, Pre-K through Grades 5 or 6
30" Subtract 4" Juvenile Height
31"
(787mm)
4"
(102mm)
13⁄8" (35mm)
30"
(762mm)
28"
(711mm)
FL-1L
FL-1H
33"
(838mm)
263⁄8"
(670mm)
24"
(610mm)
18¾"
(476mm)
17"
(432mm)
127⁄8"
(327mm) 127⁄8"
(327mm)
11"
(279mm) 11" (279mm)
10½"
(267mm) 10" (254mm)
5"
(127mm)
24"
(610mm)
5"
(127mm)
4"
(102mm)
13⁄8" (35mm)
263⁄8"
(670mm)
24"
(610mm)
18¾"
(476mm) 17"
(432mm)
127⁄8"
(327mm) 127⁄8" (327mm)
11"
(279mm) 11" (279mm)
10½"
(267mm) 10" (254mm)
5"
(127mm) 24"
(610mm)
5"
(127mm)
Recommended 240v/208v
or 277v electrical rough-in
location (approx. 3" x 6")
¾"
(19mm)
¾"
(19mm)
Recommended 240v/208v
or 277v electrical rough-in
location (approx. 3" x 6")

Installation FL-1H, FL-1L
Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006 7/14/09 7
16"
(406mm)
12"
(305mm)
25"
(635mm)
35"
(889mm)
2Lavatory Mounting
Refer to the rough-ins to determine wall
mounting location for optional mixing valve.
Installer may prefer to install the faucet
before mounting the fixture to the wall.
If necessary, adjust the fixture height
before securing to the support brackets.
Metal Studs
Drywall
Securely fasten the plywood
to at least (3) metal studs
(plywood to equal thickness
of drywall, ½" minimum)
A
Use 3⁄8" toggle bolts and
washers to secure the
support brackets to the
plywood (2) places.
B
Backing Information

FL-1H, FL-1L Installation
87/14/09 Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006
4Faucet Battery Box
5Optional Tankless Water Heater
Mount the Faucet Battery
Box to the wall at the
desired location.
A
Install the faucet according to
manufacturer’s instructions.
B
FL-1L shown
FL-1H is similar
Faucet Valve
Control Module
1/2" Flexible Hose (qty. 3)
(269-1735)
Mixing Valve
Hot
Cold Stop/Check Valve
FL-1L shown
FL-1H is similar
Electric Tankless
Water Heater
20"
(508mm)
Outlet
Inlet
Faucet Inlet
Stop/Check Valve,
Cold Supply Outlet
3Drain and Tailpiece
FL-1LFL-1H
Friction
Rubber
Tailpiece
Nut
4" (102mm)
Friction
Rubber
Tailpiece
Nut
¾" (19mm)

Installation FL-1H, FL-1L
Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006 7/14/09 9
6P-Trap and Trap Cover
FL-1L shown
FL-1H is similar
Cleaning and Maintenance for Terreon
Material Description: Terreon is an NAHB Certified densified solid surface material composed of polyester resin and is resistant
to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
Routine Cleaning: Clean daily or as often as conditions require using a standard commercial or household cleaner such as
Formula 409®or Windex®.
Stubborn Stains: Remove tough stains with Ajax®, Comet®, or Soft-Scrub®and a green Scotch-Brite®pad or lightly sand in a
circular motion with 240 grit wet/dry sandpaper.The finish can be renewed with a maroon Scotch-Brite®pad.
Special Situations for Terreon Material
Scratches: Remove scratches with a green Scotch-Brite®pad. The finish can then be renewed with a maroon Scotch-Brite®
pad, followed by a white Scotch-Brite®pad or 30-micron sandpaper.
Hard Water Deposits: Remove hard water deposits with a mild solution of vinegar and water. Always rinse the unit
thoroughly after cleaning.
Restoring the surface: Use Hope’s®Solid Surface cleaner and polish to refresh and protect the Terreon Solid Surface
material. Bradley recommends additional care and maintenance for the darker colored Terreon. For additional information,
visit bradleycorp.com.
Do not use strong acid or alkaline chemicals and cleansers to clean Terreon. If these chemicals come in
contact with the surface, wipe them off immediately and rinse with soapy water. Avoid contact with harsh
chemicals such as paint remover, bleach, acetone, etc. Avoid contact with hot pans and objects.
Repair Kits: Terreon repair kits are available. Contact your Bradley representative or distributor for part numbers and pricing
Repair kits are made to order and have a shelf life of 30 days.
Terreon is a unique, cast solid surface material. Aggregate flow and distribution as well as shades of color can vary from
product to product creating natural characteristics.
Brand Names: Use of brand names is intended only to indicate a type of cleaner.This does not constitute an endorsement,
nor does the omission of any brand name cleaner imply inadequacy. Many products named are regional in distribution, and
can be found in local supermarkets, department and hardware stores, or through your cleaning service. It is emphasized that
all products should be used in strict accordance with package instructions.

FL-1H, FL-1L Installation
10 7/14/09 Bradley Corporation • 215-1511 Rev. E; ECM 09-11-0006
IMPORTANT !
Lire ce manuel d’installation dans son intégralité pour garantir une installation
appropriée. Une fois celle-ci terminée, classer ce manuel auprès du service à
la clientèle ou d’entretien. L’installateur est responsable de la conformité de
l’installation aux codes pour des drain et codes et règlements en vigueur.
Assurez-vous que toutes les pièces sont incluses dans l’emballage et qu’il n’en
manque aucune avant de jeter l’emballage. Ne commencez pas l’assemblage avant
de recevoir les pièces manquantes.
Veiller à bien vidanger et fermer toutes les conduites d’eau avant de commencer
l’installation. Tout débris dans les conduites d’alimentation risque de provoquer un
mauvais fonctionnement des soupapes.
Couper toute alimentation électrique aux prises électriques puis débrancher
toutes les unités électriques avant l’installation. L’alimentation électrique DOIT
être coupée jusqu’à ce que l’installation soit terminée. Une fois l’installation
terminée, ouvrir d’abord l’alimentation en eau puis mettre en marche l’alimentation
électrique.
La quincaillerie fournie par l’installateur doit être appropriée pour la construction
des murs. Les dispositifs d’ancrage muraux doivent avoir un indice d’arrachement
minimum de 1,000 lb (453,6 kg).
Les garanties de produits figurent sous la rubrique « produits » sur notre site
Internet à bradleycorp.com.
THIS
SIDE
UP
Packing List
•
•
•
•
Installation
Equipements nécessaires :
• (4) dispositifs d’ancrage muraux de 3⁄8", boulons et rondelles de D.E. de 1" mini. pour monter bâti principal et lavabo
sur le mur (indice d’arrachement minimum de 453,6 kg/1 000 lb)
• (2) dispositifs d’ancrage muraux n° 10 (pour robinet mitigeur/support de fixation en option)
• Conduites d’alimentation d’eau chaude et d’eau froide ou d’eau tempérée ½" NPT
• Canalisation de drain 1½" NPT
• EN OPTION : Prise électrique protégée 110 volts GFCI pour transformateur à brancher 100–120 V c.a. (pour
robinets Bradley)
• EN OPTION : 240/208 ou 277 volts pour chauffage d’eau électrique sans réservoir