bravour Charging Cabinet 12 User manual

User Guide :
Bravour® Charging Cabinet 12

User Guide :
Power supply Technical Data
Although intended for multiple item charging, care must be
taken that the total power does not exceed the maximum
power or maximum current of the power supply units.
Voltage: 250V AC 50-60 Hz 10A
Maximum Current: 10A
Rating Current: 10A
Maximum Power: 2500W
For Reference only -Typical Ratings of appliances:
Laptop
65-100W
Mobile Phone Charger
6W
Tablet
10W
For accurate information, check the plug-in part of your
charger for details.
If in doubt, before use, have a qualified electrician verify the
current draw does not exceed the rating of the unit when all
devices are installed.

Safety Information
•Do not climb on this equipment.
•Do not use this unit outdoors.
•Do not place liquids on or near the cabinet to avoid spillage.
•Never unplug the cabinet from the mains with wet hands.
•Do not use an extension cord with this unit.
•Repairs should always be performed by a qualified electrician.
•Never plug in the cabinet if the power cord is torn or inadequately
repaired.
•The mains supply plug is the disconnect device -to completely
disconnect the mains voltage, switch off at the power inlet and then
at the mains and remove the mains plug from the socket.
•Only use the power cable with the fuse rating supplied.
•Ensure all fitted earth connections are maintained in their original
condition.
•Ensure ventilation holes are not obstructed.
•Always close and latch door before moving the cabinet.
•Never use the power cord to pull the cabinet.
•Never roll the cart over the power cord.
•Remove any external devices on top of the cabinet before moving.

•For Fitting of
Castors [2 x A and 2
x B] –
•Ensure castors are
tightly secured in
position before use –
push until “click” is
heard to fit.
The charging cabinet can be stacked
and secured together using 4 x Wing
bolts [C]
Max Height 2 Charging Cabinets.
Ensure cabinets are tightly
secured together.
Not suitable for use with castors
when stacked.

ENSURE CORRECT FIXINGS ARE USED FOR TYPE OF WALL TO BE
MOUNTED TO.
Check there is sufficient area to mount the cabinet and use a level to ensure plate is
horizontal.
With correct fixings for the type of wall (not supplied), attach the mounting plate [DR21806]
to a suitable, flat surface.
Slide the Charging Cabinet’s mounting slots over the hooks on the wall plate.
Secure the Charging cabinet to the mounting plate with the 2 x screws [D] and washers [E]
supplied.

•The Charging cabinet 12 allows you to secure, store
and charge up to 12 Chromebook, laptop, or tablet
devices with screens up to 15".
It offers
•Versatile mounting options - wall mount, tabletop
mount or stack, optional castors for mobility (single
stack only).
•Efficient power distribution via a single plug for all
your devices which are kept safe by locking door.
Cable management allows for easy organisation of the power supply and the laying of cables to any device.
Product Details

•Bravour® Deutschland
•Alt Heerdt 104
•40549 Düsseldorf
•Deutschland
•T. [phone]
•[e-mail]
•Bravour® Nederland
•De Rijn 7C
•5684 PJ Best
•Nederland
•T. [phone]
•[e-mail]
•Bravour® Europe
•De Rijn 7C
•5684 PJ Best
•T. [phone]
•[e-mail]
•Visit: Bravour®.com

•Colour: Black
•Material: Mild Steel 1.0mm and 1.2mm
•Functionality: Charging via PDU –
•12 sockets
•Lock: Key lock incorporated into flush fit
handle