Breadman CORNER BAKERY TR888 User manual

INSTRUCTION
MANUAL
CORNER BAKERY
BREAD & DESSERT MAKER
MODEL NUMBER TR888

1.
TABLE OF CONTENTS
Important Safeguards ..................................................................................................................2
Additional Important Safeguards ...............................................................................................3
Electric Power ............................................................................................................................3
Polarized Plug ............................................................................................................................3
Power Outage .............................................................................................................................4
Before Your First Use ..................................................................................................................4
Your Corner Bakery Bread & Dessert Maker ............................................................................5
Control Panel .............................................................................................................................6
Using the Breadman®..............................................................................................................7-9
Kneading and Baking Cycles ....................................................................................................10
Program Specification Chart.....................................................................................................11
Making Dough and Baking Bread .......................................................................................12-14
Using the Delay Bake Timer ...................................................................................................15
Butter ........................................................................................................................................16
Dessert .....................................................................................................................................18
Cleaning Instructions ...............................................................................................................20
Storing ......................................................................................................................................21
Troubleshooting ..................................................................................................................21-22
Bread and Dough Check List ....................................................................................................23
Suggestions ...............................................................................................................................24
In-Warranty Service Information ............................................................................................25
Specifications ...........................................................................................................................26
Warranty....................................................................................................................................27

2.
When using electrical appliances, basic safety
precautions should always be followed includ-
ing the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Use handles or
knobs.
3. To protect against electrical shock do not
immerse cord, plugs, or appliance in
water or other liquid.
4. Close supervision is necessary when any
appliance is used by or near children.
5. Unplug from outlet when not in use and
before cleaning. Allow to cool before put-
ting on or taking off parts.
6. Do not operate any appliance with a dam-
aged cord or plug, or after the appliance
malfunctions or has been damaged in any
manner. Contact Consumer Service for
examination, repair or adjustment.
7. The use of accessory attachments not
recommended by the appliance manufac-
turer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or
counter, or touch hot surfaces.
10. Do not place on or near a hot gas or
electric burner, or in a heated oven.
11. Extreme caution must be used when mov-
ing an appliance containing hot oil or
other hot liquids.
12. To disconnect, remove plug from wall
outlet.
13. Do not use appliance for other than
intended use.
14. Avoid contacting moving parts.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
CAUTION: A short power-supply cord (or
detachable power-supply cord) is provided to
reduce the risk resulting from becoming entan-
gled in or tripping over a longer cord.
Longer detachable power-supply cords or
extension cords are available and may be used
if care is exercised in their use.
If longer detachable power-supply cord or
extension cord is used, (1) the marked electri-
cal rating of the cord set or extension cord
should be at least as great as the electrical rat-
ing of the appliance, and (2) the cord should be
arranged so that it will not drape over the coun-
tertop or tabletop where it can be pulled on by
children or tripped over unintentionally.
READ AND SAVE THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all electrical appliances and may
cause personal injury or death. Please follow all safety instructions.
IMPORTANT SAFEGUARDS

3.
ADDITIONAL IMPORTANT SAFEGUARDS
CAUTION HOT SURFACES: This appliance generates heat and escaping steam dur-
ing use. Proper precautions must be taken to prevent the risk of burns, fires, or other
injury to persons or damage to property.
1. A person who has not read and understood all operating and safety instructions
is not qualified to operate this appliance. All users of this appliance must read
and understand this Owner’s Manual before operating or cleaning this appliance.
2. Unplug from outlet when not in use and before cleaning. To avoid electric
shock, never immerse or rinse this appliance in water or any other liquid.
3. If this appliance falls or accidentally becomes immersed in water, unplug it from
the wall outlet immediately. Do not reach into the water!
4. When using this appliance, provide adequate air space above and on all sides for
air circulation. Do not operate this appliance while it is touching or near cur-
tains, wall coverings, clothing, dishtowels or other flammable materials.
5. To reduce the risk of fire, do not leave this appliance unattended during use.
6. If this appliance begins to malfunction during use, immediately unplug the cord.
Do not use or attempt to repair a malfunctioning appliance!
7. The cord to this appliance should only be plugged into a 120V AC electrical
wall outlet.
8. Do not use this appliance in an unstable position.
9. Do not use this appliance for other than its intended use.
ELECTRIC POWER
If electric circuit is overloaded with other appliances, your bread maker may not operate
properly. The bread maker should be operated on a separate electrical circuit from other
operating appliances.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). As a safety fea-
ture to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

4.
POWER OUTAGE
During the Bread programs, if the bread maker loses power before the baking process
begins, you may try starting the bread maker at the beginning of the program again for
all programs except Fast Bake™. If using Dough program, you may also try starting it at
the beginning of the program again. This may not always produce an acceptable loaf. If
you are not sure when the outage occurred, remove the dough ball from the pan and
place in an oven-safe baking container. Allow to double in size and place in a preheated
350°F/177°C oven for 30-45 minutes or until done. If it is done, the bread should sound
hollow when tapped on the top of the loaf.
If you are using the Fast Bake™ program or if the bread has already begun to bake when
the outage occurs, you must begin with new ingredients.
Should a power outage occur during the Dessert program, provided it has not begun to
bake, you can try starting the program from the beginning. This may not always produce
an acceptable result.
BEFORE YOUR FIRST USE
1. Please fill out warranty information.
2. Unpack and clean the Bread & Dessert Maker. See Cleaning and Storing.
3. Place the Bread & Dessert Maker away from edge of counter on a dry, stable sur-
face away from burners and away from areas where cooking grease or water may
splatter onto it. Avoid placing it where it may tip over during use.
4. Plug the Bread & Dessert Maker into a 120 V ~ 60 Hz outlet.

5.
1. Pan Handle
2. Kneading Blade
flat side down (P/N
55S866)
3. ▼Front ▼
4. Bread Pan (P/N 55S867)
5. Shaft, rotates the
Kneading Blade
6. Inner Case
7. Handle
8. Lid (P/N 55S864)
9. Viewing Window
10. Air Exhaust
11. Control Panel
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
The Corner Bakery
Bread & Dessert Maker
Cookbook
®
61218
FOR BUTTER ONLY
Liquid Measuring Cup
(1 cup)
(P/N 22257)
Cookbook for Breads,
Doughs, Butters and
Desserts (P/N 61218)
Accessories
Butter Lid (Use this lid for
Butter program only.)
(P/N55S884)
YOUR CORNER BAKERY BREAD
& DESSERT MAKER
The illustrations in this Instruction Manual are for information purposes only. You may
find your bread maker and parts look different, however, the steps for operation are the
same.

6.
CONTROL PANEL
A. Display Window
Indicates the number of the program, crust
color (if using programs 1-5) and amount of
time left for completion of program. Indicates
display signals.
B. SELECT
Press until program number is visible in Dis-
play Window for all programs except Dessert
and Fast Bake™.
C. DESSERT
Press to select the Dessert program. The num-
ber 8 will be visible in the Display Window.
D. FAST BAKE™
Press to select the Fast Bake™ program. The
number 9 will be visible in the Display Window.
E. ▼ ▲ TIME
Press arrows to delay program. The time will
advance in 10 minute intervals up to 13:00
hours. Press the START button; the colon will
blink. The timer cannot be used on Butter,
Dessert or Fast Bake™ programs.
F. BAKING
Press to select light or dark crust color for
Bread programs only; medium is preset. Use
light crust for breads high in sugar.
G. START
After selecting the program, the baking con-
trol and timer (if needed), press to start the
program or timer countdown.
H. STOP
Press and hold for more than 2 seconds during
the cycle to cancel a program.
Note: When the Corner Bakery Bread &
Dessert Maker is packaged for shipment,
a clear plastic film is placed over the
control panel; carefully peel it off.
I. Program Cancel
If you want to cancel the selected program,
press the STOP button and hold it down for
more than 2 seconds at any time during the
cycle.
J. Program Select Recall
If you have started the Corner Bakery Bread &
Dessert Maker and are not sure which program
you have selected, you may recall this informa-
tion. Press and hold the START button at any
time. The number of the program and the crust
color selection (if available) will be visible in
the Display Window.

7.
USING THE BREADMAN®
Before using the Breadman®for the first time, carefully read all
of the instructions included in this manual.
With your new Breadman®Corner Bakery Bread & Dessert
Maker:
• You can use commonly available pre-packaged bread mixes.
Follow the instructions on the package.
• You can bake a loaf of bread from scratch. See the Corner
Bakery Bread & Dessert Maker Cookbook included with
your Breadman®Corner Bakery Bread & Dessert Maker for
lots of tasty options.
• There are also many bread machine cookbooks available at
bookstores nationwide.
• You can make dough for rolls or shaped loaves you’ll bake in
your own oven.
• Use the Dough Cycle to do the mixing and kneading for
you, then shape, proof, and bake it in the Breadman®Corner
Bakery Bread & Dessert Maker, or in a conventional oven.
• Insert the Bread Pan into the Oven Chamber. Press down
until it locks into place.
• Remember to attach your Kneading Paddle FIRST, then
add the ingredients BEFORE inserting the Bread Pan into
the Oven Chamber.
• When you remove the Bread Pan after Baking, BE SURE
TO WEAR OVEN MITTS to prevent burning. Hold the
Handle and lift the Bread Pan up and out of the Bread
Baker.
• Remove the loaf by turning the Bread Pan upside down and
shaking gently, then check to see that the Kneading Paddle
is removed from the loaf. If it is stuck in your bread, use a
non-metal utensil to gently remove it, taking care not to
scratch the Kneading Paddle.
Inserting and
Removing the
Bread Pan

8.
USING THE BREADMAN®(CONTINUED)
• Use oven mitts when working with bread or any part of the
Breadman®that is hot from baking.
• Wipe off crumbs and clean the Breadman®, as needed,
after baking.
• Unplug the Breadman®Corner Bakery Bread & Dessert
Maker when you are not using it.
• It is normal for the Viewing Window to collect moisture
during the Rise Cycle. As your food bakes, the moisture
soon will evaporate so you can watch your bread’s baking
progress.
• Do not touch the Viewing Window during use. The Viewing
Window gets very hot.
• Don’t open the Lid during Baking. This causes baked
products to bake improperly.
• Don’t unplug the Breadman®during Kneading or Baking.
This will stop the operation.
• You have Instant Recall™ Power Failure Back-Up. If the
electricity in your home goes out, the Breadman®Corner
Bakery Bread & Dessert Maker’s memory stores the active
program for up to 15 minutes.
Operating Tips
Caution

9.
USING THE BREADMAN®(CONTINUED)
• To protect young children, keep the Breadman®out of their
reach when you’re not there to supervise – especially during
the Kneading and Baking Cycles.
• Use the Breadman®on a flat, hard surface. Don’t place it
near a flame or heat, or on a soft surface (such as carpet).
Avoid placing it where it may tip over during use. Dropping
the Breadman®could cause it to malfunction.
• To avoid burns, stay clear of the Steam Vent during Knead-
ing and Baking. Also, do not touch the Viewing Window –
it gets very hot.
• ALWAYS HANDLE THE HOT BREAD PAN OR BAKING
RACK WITH A POT HOLDER OR OVEN MITT. After
baking, wait for the Breadman®to cool down before touch-
ing or cleaning the Bread Pan, Baking Rack or internals of
the Breadman®without oven mitts.
• Never use metal utensils with the Breadman®. These can
scratch the non-stick surface of the Bread Pan.
• Avoid electric shock by unplugging the machine before
using a damp cloth or sponge to wipe the interior of the
Oven.
• Never use the Bread Pan on a gas or electric cooktop, on an
open flame or in a microwave oven.
• Avoid covering the Steam Vent during Kneading and Baking
Cycles. This could cause the Breadman®to warp or discolor.
• Always make sure the Kneading Paddle is removed from the
bread prior to slicing.
Caution

10.
KNEADING AND BAKING CYCLES
All Breadman®recipes tell you what program to select for each recipe. Refer to prepack-
aged bread mix directions to determine the program selection for each specific mix.
The Dessert program features a beep signal to check for proper mixing. The Fast Bake™
program features a beep signal to check the dough ball. The Sweet, Whole Wheat and
Dessert programs contain beep signals to check the dough ball and/or add additional
ingredients (i.e., raisins, nuts). Refer to program specification on page 10.
• Use this program for basic bread recipes and most
packaged bread mixes.
• This program works best if a recipe is high in sugar, fat, eggs
or cheese.
• If a recipe contains more than 50% whole wheat flour, use
this program. During the first 20 minutes, the bread maker is
preheating prior to first knead.
• This program is best suited for breads low in fat and sugar,
which results in a crisp crust and a coarse, chewy interior.
• Use this program on recipes indicated with a in the Bread
Index of the Corner Bakery Cookbook. Simply omit the
amount of active dry yeast called for in the recipe and use
the larger amount of active dry yeast listed for the Insta
Bread program instead.
• This program is used to prepare dough for making bread or
rolls which are shaped before baking in a conventional
oven.
• The kneading blade churns the heavy whipping cream for
30 minutes. The heating element does not warm the inner
case.
• This program will mix and bake/cook cakes, cheesecakes,
pie fillings/puddings and fudge.
• Use this program to make bread in less than one hour. The
crust color is preset to medium. Simply use the special
instructions and recipes found in the Corner Bakery Cook-
book.
Program
Basic
Program
Sweet
Program
Whole Wheat
Program
French
Program
Insta Bread
Program
Dough
Program
Butter
Program
Dessert
Program
Fast Bake™

11.
- BASIC
*The Dessert program will beep 2 times when the display reads 1:48 as a reminder to stir the ingredients. The Fast Bake™program will beep when the
display reads :53 to check the dough ball and scrape any ingredients from the sides of the pan.
**The Sweet, Whole Wheat and Dessert programs will beep to tell you when to check the dough ball and/or add additional ingredients, i.e. raisins or
nuts, in specialty breads or when to add ingredients in desserts.
1 - Delay timer
2 - Preheat
3 - Mix
4 - 1st knead
5 - Display time for
beep to stir*
6 - Rest
7 - 2nd knead
8 - Display time for
beep to add**
9 - 1st rise
10 - Punch
11 - 2nd rise
12 - Punch
13 - 3rd rise
14 - Bake/Cook
15 - Cool
16 - Churn
17 - End
18 - Total
19 - Keep warm
3:50 - 13:00
-
2 min
5 min
-
5 min
12 min
-
40 min
4 sec
26 min
4 sec
60 min
50 min
20 min
-
[:H]
3:40
3 hours
3:50 - 13:00
-
2 min
5 min
-
5 min
12 min
3:25
40 min
4 sec
26 min
4 sec
60 min
50 min
20 min
-
[:H]
3:40
3 hour
4:10 - 13:00
20 min
2 min
11 min
-
50 min
12 min
2:34
20 min
4 sec
15 min
4 sec
40 min
50 min
20 min
-
[:H]
4:00
3 hours
3:50 - 13:00
-
2 min
11 min
-
50 min
12 min
-
20 min
4 sec
15 min
4 sec
40 min
50 min
20 min
-
[:H]
3:40
3 hours
2:09 - 13:00
-
2 min
5 min
-
-
17 min
-
17 min
4 sec
8 min
4 sec
30 min
40 min
-
-
[:H]
1:59
3 hours
1:13 - 13:00
-
2 min
4 min
-
5 min
12 min
-
40 min
4 sec
-
-
-
-
-
-
End
1:03
-
--
--
2 min
9 min
:53
-
-
-
16 min
-
-
-
-
32 min
-
-
End
:59
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30 min
End
:30
-
-
-
2 min
5 min
1:48
5 min
8 min
1:20
20 min
-
-
-
-
55 min
20 min
-
End
1:55
-
- WHOLE
WHEAT
- SWEET
- FRENCH
- INSTA
BREAD
- DOUGH - BUTTER - DESSERT - FAST
BAKE
™
Process
PROGRAM

12.
MAKING DOUGH AND BAKING BREAD
Programming
Note: Use plastic lid for Butter program only.
The following are the general steps for using your bread maker. Depending on the pro-
gram or recipe you choose, some steps may not apply or there may be additional steps.
Refer to the Bread, Fast Bake™, Dough, Butter and Dessert sections.
1. Add all ingredients to the pan in the order listed in the recipe.
2. For more detailed ingredient information or regular bread and dough instruc-
tions, refer to Corner Bakery Cookbook.
3. The Fast Bake™ program does not have a delay or hold warm feature.
4. The illustrations in this Use and Care Guide are for information purposes only.
You may find your bread maker and parts look different, however, the steps for
operation are the same.
Open the Lid and remove the Bread Pan by
pulling straight up, using the Pan Handle.
Attach the Kneading Blade onto the Shaft,
flat side down.
STEP 2STEP 1

13.
Place all ingredients in Bread Pan in the
order listed.
NOTE: If using the Fast Bake™ program or
delay timer, add all of the ingredients
at the beginning. The ingredients
will be chopped into smaller pieces.
Insert Bread Pan until it fits securely into
bottom of bread maker with the ▼FRONT
▼marking facing the front of the bread maker.
This will provide a more even airflow during
baking/cooking.
Close the Lid. Plug into 120 V ~ 60 Hz outlet.
The display indicator will light up. Place bread
maker away from
edge of counter.
Select program and baking control. The
BAKING function is used to select the bread
crust color for all
bread programs
except Fast
Bake™. It can
be baked
medium, light
or dark. It is not
necessary to
press the control
when medium is
desired. Smaller
size recipes and
mixes will not fill
the Bread Pan when finished.
STEP 6
STEP 5
STEP 4
STEP 3
▼ FRONT ▼
Yeast
Dry
Ingredients
Water or
Liquids

14.
Press START. The program time remaining is
displayed and counts down. The Fast Bake™
program will beep as a reminder to check the
dough ball. At this
time, use a rubber
spatula to scrape
any ingredients
from the sides of
the Bread Pan.
The Sweet and
Whole Wheat
programs will
beep as a
reminder to add
additional ingre-
dients during the
second knead.
Opening the Lid will not stop kneading. Add
ingredients quickly and evenly over dough to
prevent heat loss. At this time also check the
dough ball and use a rubber spatula to scrape
any ingredients from the sides of the Bread
Pan. Close Lid.
The bread maker will beep when bread or
dough is done. Press STOP and remove the
Bread Pan using oven mitts. If you do not stop
the unit and remove the bread, it will automat-
ically go into the keep warm function on all
programs except
Dough and Fast
Bake™. During
the keep warm
function [:H]
will be visible in
the Display
Window. Your
bread will be
kept warm for
three hours and
then the bread
maker will shut off. For best results, remove
bread immediately after the bake process is
complete. At the end of Dough and Fast
Bake™, End will be visible in the Display
Window.
Turn the Bread Pan upside down and shake
several times to release the bread or dough.
Place the bread upright on a wire rack to cool
20-30 minutes
before cutting.
This allows the
steam to escape.
Be sure to
remove the
Kneading Blade
from the bread.
Follow shaping
and baking
directions for
dough.
CAUTION: The Bread Pan, Knead-
ing Blade and bread will be very hot.
Always unplug after use. Note: The
unit must be allowed to cool down
between each use.
STEP 9
STEP 8
STEP 7

15.
USING THE DELAY BAKE TIMER
The delay timer can be set to delay bread making up to 13
hours. At the selected time, delicious bread will be ready. The
delay timer works for all programs except Fast Bake™ Bread,
Butter and Dessert.
Add all ingredients to the Bread Pan in the order listed. It is
critical to add the yeast last, on top of the flour and away from
the liquid. This will keep the yeast from activating until the
bread maker starts to mix.
When delaying bread, reduce the amount of water by 1-3 tea-
spoons, depending on the size of loaf. Set the program and
bread baking control. Before pressing the START button, set
the timer for however long you want to wait before the bread
is done.
Example: It is 9:00 p.m. now. The bread is to be ready at 6:30
a.m. the next morning. Set the timer for 9:30, because there
are 9 hours and 30 minutes between 9:00 p.m. and 6:30 a.m.
When pressed, the time will advance in 10
minute increments.
When constant pressure is applied to the
button, the time will advance quickly.
Press the START button. The timer is set,
and the colon blinks. After one minute, 9:29 is
displayed. The timer will continue to count
down in 1 minute increments.
Note: The bread maker will start
when the timer has counted down to
the start time for the program to
begin.
STEP 3
STEP 2
STEP 1
13 Hour
Delay Bake Timer

16.
BUTTER
The Butter program does not have a delay feature.
For more detailed ingredient information and butter instructions refer to the Corner
Bakery Cookbook.
Note: Use plastic lid for Butter program only.
Open the Lid and remove the Bread Pan by
pulling straight up, using the Pan Handle.
Attach the Kneading Blade onto the Shaft,
flat side down.
Pour heavy whipping cream in Bread Pan.
Place Butter Lid on Bread Pan. Use Butter Lid
for Butter
program only.
Insert Bread Pan until it fits securely into
bottom of bread maker with the ▼FRONT ▼
marking facing
the front of
the bread
maker. This
will provide
more even air-
flow.
STEP 4
STEP 3
STEP 2
STEP 1
HEAVY
WHIPPING
CREAM

17.
Close the Lid. Plug into 120 V ~ 60 Hz outlet.
The Display Window will light up.
Select Butter program.
Press the START button. The program time
remaining is displayed and counts down.
The bread maker will beep when butter is
done. Press the STOP button and remove the
Bread Pan.
Without removing Butter Lid, tilt the Bread
Pan, pouring the buttermilk off the butter.
Remove Butter Lid and pour one cup of cold
water into the
Bread Pan and
replace Lid. Tilt
Bread Pan to
drain water from
butter and repeat.
Remove butter
from Bread Pan
using a rubber or
plastic spatula.
CAUTION:
Always unplug
after use.
STEP 9
STEP 8
STEP 7
STEP 6
STEP 5

18.
DESSERT
Programming
The Dessert program does not have a delay feature.
For more detailed ingredient information and dessert instructions refer to the Corner
Bakery Cookbook.
Note: Use Butter Lid for Butter program only.
Open the Lid and remove the Bread Pan by
pulling straight up, using the Pan Handle.
Attach Kneading Blade onto the Shaft, flat
side down.
Place all ingredients in Bread Pan in the
order listed. No mixing of ingredients outside
the machine is necessary.
Insert Bread Pan
until it fits
securely into
bottom of bread
maker with the
▼ FRONT ▼
marking facing
the front of the
bread maker.
This will provide
a more even air-
flow during bak-
ing/cooking.
STEP 4
STEP 3
STEP 2
STEP 1
▼ FRONT ▼
Dry
Ingredients
Liquids

19.
Close the Lid. Plug into 120 V ~ 60 Hz outlet.
The Display Window will light up.
Press DESSERT button. Place bread maker
away from edge of counter.
Press START. The program time remaining is
displayed and counts down. When the Display
Window reads
1:48, the
machine will
beep 2 times and
stop mixing.
Take a rubber
spatula and
scrape the dry
ingredients from
the top sides and
bottom corners
of the Bread Pan
into the wet mixture. At 1:43 mixing will
resume. When the Display Window reads 1:20,
it will beep 4 times as a reminder to add addi-
tional ingredients. Add ingredients quickly
and evenly over batter to prevent heat loss.
Close Lid.
The bread maker will beep when dessert is
done. Press STOP and remove the Bread Pan
using oven mitts for all desserts except cheese-
cakes. See special
instructions for
cheesecakes in
the Corner Bak-
ery Cookbook.
Place the Bread Pan on a heat resistant sur-
face. Refer to the Corner Bakery Cookbook for
additional mixing, cooling and removing
instructions.
CAUTION: The
Bread Pan,
Kneading Blade
and dessert will
be very hot.
Always unplug
after use.
STEP 9
STEP 8
STEP 7
STEP 6
STEP 5