Bresser MeteoTemp WTM Colour User manual

Weather Station
MeteoTemp WTM Colour
Quickstart guide

Visit our website via the following QR Code or web link to find further information on this
product or the available translations of these instructions.
www.bresser.de/P7007510
www.bresser.de/warranty_terms
WARRANTY

Contents
1 Imprint ................................................................................. 22
3 About this Instruction Manual........................................... 23
4 General safety instructions............................................... 23
5 Parts overview and scope of delivery .............................. 27
6 Screen display.................................................................... 29
7 Setting up power supply.................................................... 30
8 Automatic time setting....................................................... 31
9 Receiving measurements automatically.......................... 32
10 Key functions...................................................................... 32
11 Technical data .................................................................... 34
12 EC Declaration of Conformity ........................................... 35
13 Disposal .............................................................................. 35
14 Warranty.............................................................................. 36
3/20

4-20
1 Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
If you wish to submit a warranty claim or service request,
please refer to the “Warranty” and “Service” information in
this document. Please be aware that any requests or sub-
missions sent directly to the manufacturer cannot be pro-
cessed.
Errors excepted. Subject to technical modifications.
© 2020 Bresser GmbH
All rights reserved.
Reproduction of this document, including extracts, in any
form (photocopied, printed etc.) or the use and distribution
of this document by electronic means (image file, website
etc.) is not permitted without the prior written consent of the
manufacturer.
The terms and brand names of the respective companies
used in this document are protected by brand, patent or
product law in Germany, the European Union and/or other
countries.
2 Validity information
This documentation is valid for the products with the article
numbers listed below:
7007510
Manual version: v062020a

5/20
Manual description:
Quickstart_7007510_MeteoTemp-WTM-Colour_US_en
_BRESSER_v062020a.pdf
With any service inquiries, please state these information.
3 About this Instruction Manual
NOTICE
This Quick Start guide is not intended to replace the
more detailed user manual.
Please read the safety instructions and the operating in-
structions carefully before use.
4 General safety instructions
DANGER
Risk of electric shock
This device has electronic parts operated via a power
source (power supply and/or batteries). Improper use of this
product can cause an electric shock. An electric shock can
cause serious or potentially fatal injuries. The following
safety information must be observed at all times.
•Children must only use the device under adult supervi-
sion! Only use the device as described in the manual;
otherwise, you run the risk of an electric shock.
•Disconnect the device from the power supply by pulling
the power plug when it is not used or in case of longer
interruption of operation and before starting any work
on maintenance and cleaning.

5/20
•Position your device so that it can be disconnected
from the power supply at any time. The power socket
should be installed near the device and should be eas-
ily accessible as the mains cable plug is used to dis-
connect the device from the power supply.
•To disconnect the device from the power supply, al-
ways pull on the plug. Never pull on the cable.
•Before starting up the device, check the device, the
cables and the connections for signs of damage.
•Never use a damaged device or a device with dam-
aged live parts. Damaged parts must be immediately
replaced by an authorised service company.
•Only use the device in complete dry environment and
do not touch it with wet or moist parts of your body.
DANGER
Risk of suffocation
Improper use of this product can result in suffocation. This
is particularly dangerous for children. The following safety
information must be observed at all times.
•Keep packaging materials (plastic bags, rubber bands
etc.) away from children. They can cause suffocation.
•This product contains small parts that could be swal-
lowed by children. There is a risk of choking!
DANGER
Risk of explosion
Improper use of this product can cause an explosion. The
following safety information must be observed at all times to
prevent an explosion.

7/20
•Do not expose the device to high temperatures. Use
only the supplied power supply or the recommended
batteries. Do not short-circuit the device or batteries or
throw them into a fire! Excessive heat or improper
handling could trigger a short circuit, a fire, or an explo-
sion.
NOTICE
Risk of damage to property
Improper handling can result in damage to the device and/
or to the accessories. Always observe the following safety
information when using the device.
•Never disassemble the device. In the event of a fault,
please contact your specialist retailer. The specialist re-
tailer will contact the service centre and send the
device for repair if necessary.
•Do not expose this device to higher temperatures and
protect it from water and high humidity.
•Do not immerse the unit in water!
•Protect the device from severe shocks!
•For this device only use accessories and spare parts
that comply with the technical information.
•Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from dif-
ferent brands or with different capacities. Remove the
batteries from the unit if it has not been used for a long
time.
•Never use rechargeable batteries.

8/20
NOTICE
Risk of voltage damage!
The manufacturer is not liable for voltage damage due to
improperly inserted batteries or through the use of an im-
proper power adapter!

9/20
5 Parts overview and scope of
delivery
zzZ
2
CH
3
2
1
15
16
17
18
20
21 21
B
19
1
14
345678
9
10
12
A
13
11
Illustration 1: Parts overview for base station (top) and remote
sensor (bottom)

10/20
1 SNOOZE/LIGHT button
(snooze function and tempor-
ary background lighting)
2 Display
3 MODE button (time mode
selection and settings) 4 UP button (Value setting up- wards)
5 DOWN button (Value setting
downwards, temperature unit
selection (°C/°F), pressure
value selection
6 ALARM button (Alarm set-
ting)
7 CH button (channel selec-
tion) 8 WAVE button (Initiate data reception from the wireless
sensor)
9 Mounting hole (Base station) 10 Battery compartment (Base
station)
11 Battery compartment cover
(Base station) 12 Stand, fold-out
13 DC connection socket for
coaxial/barrel connector 14 Display (Remote sensor)
15 Battery compartment cover
(Remote sensor) 16 Battery compartment (Re- mote sensor)
17 TEST button (Transmits the
current measured values) 18 °C/°F button (temperature format setting)
19 Channel selector switch 20 Mount hole (Remote sensor)
21 Stand, fold-out 22 DC power adapter with US
mains plug.
23 DC coaxial/barrel connector
Scope of delivery
Base station (A), remote sensor (B), power adapter (C)
Recommended batteries (not included)