Bresser WIFI 4Cast User manual

Weather Station ·
WIFI 4Cast
EN Instruction manual

DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu
finden.
EN
Visit our website via the following QR Code or web link to find further information on this
product or the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le
lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga
a visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni
disponibili.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)
para ver las versiones disponibles.
CA
Voleu una guia detallada d'aquest producte en un idioma específic? Visiteu el nostre lloc web
a través del següent enllaç (codi QR) per accedir a les versions disponibles.
PT
Deseja um manual detalhado deste produto numa determinada língua? Visite a nossa Website
através da seguinte ligação (QR Code) das versões disponíveis.
www.bresser.de/P7001040
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
APP DOWNLOAD:
WeatherSense

3
Contents
1 Imprint (German) ............................................................................................................................................4
2 Validity note ....................................................................................................................................................4
3 About this Instruction Manual.......................................................................................................................4
4 General safety instructions ...........................................................................................................................4
5 Parts overview and scope of delivery ..........................................................................................................6
6 Screen display ................................................................................................................................................7
7 Before starting operation...............................................................................................................................8
8 Setting up power supply................................................................................................................................8
9 Battery level indicator ....................................................................................................................................9
10 Configuration / Setting up a WIFI connection..............................................................................................9
11 Automatic time setting.................................................................................................................................11
12 Manual time setting and other user-defined settings ...............................................................................11
13 Alarm setting.................................................................................................................................................11
14 Snooze function............................................................................................................................................12
15 Receiving measurements automatically ....................................................................................................12
16 3D weather forecast from the Internet........................................................................................................12
17 Wind speed and wind direction...................................................................................................................13
18 Feels like temperature..................................................................................................................................14
19 MAX/MIN weather data .................................................................................................................................14
20 Temperature and humidity display from the wireless sensor..................................................................14
21 Display brightness regulation .....................................................................................................................14
22 Technical data...............................................................................................................................................14
23 Troubleshooting ...........................................................................................................................................15
24 EC Declaration of Conformity .....................................................................................................................16
25 Disposal.........................................................................................................................................................16
26 Warranty ........................................................................................................................................................17

4 / 20
1 Imprint (German)
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
For any warranty claims or service enquiries, please refer to the information on "Warranty" and "Ser-
vice" in this documentation. We apologize for any inconvenience caused by the fact that we cannot
process enquiries or submissions sent directly to the manufacturer's address.
Errors and technical changes excepted.
© 2019 Bresser GmbH
All rights reserved.
The reproduction of this documentation - even in extracts - in any form (e.g. photocopy, print, etc.) as
well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without
the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are gen-
erally protected by trade, trademark and/or patent law in Germany, the European Union and/or other
countries.
2 Validity note
This documentation is valid for the products with the following article numbers:
7001040
Manual version: 0320
Manual designation:
Manual_7001040_WIFI-4Cast_en_BRESSER_v032020a
Always provide information when requesting service.
3 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Read the safety instructions and the operating manual carefully before using this device.
Keep this manual in a safe place for future reference. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
4 General safety instructions
DANGER
Risk of electric shock
This device has electronic parts operated via a power source (power supply and/or batteries). Im-
proper use of this product can cause an electric shock. An electric shock can cause serious or poten-
tially fatal injuries. The following safety information must be observed at all times.

5 / 20
• Children must only use the device under adult supervision! Only use the device as described in the
manual; otherwise, you run the risk of an electric shock.
• Disconnect the device from the power supply by pulling the power plug when it is not used or in
case of longer interruption of operation and before starting any work on maintenance and cleaning.
• Position your device so that it can be disconnected from the power supply at any time. The power
socket should be installed near the device and should be easily accessible as the mains cable
plug is used to disconnect the device from the power supply.
• To disconnect the device from the power supply, always pull on the plug. Never pull on the cable.
• Before starting up the device, check the device, the cables and the connections for signs of dam-
age.
• Never use a damaged device or a device with damaged live parts. Damaged parts must be imme-
diately replaced by an authorised service company.
• Only use the device in complete dry environment and do not touch it with wet or moist parts of
your body.
DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative
that you observe the following safety information.
• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a
DANGER OF CHOKING [These pose a CHOKING HAZZARD]
• This product contains small parts that can be swallowed by children! There is a DANGER OF
CHOKING [These pose a CHOKING HAZZARD]
DANGER
Risk of explosion
Improper use of this product can cause an explosion. The following safety information must be ob-
served at all times to prevent an explosion.
• Do not expose the device to high temperatures. Use only the supplied power supply or the recom-
mended batteries. Do not short-circuit the device or batteries or throw them into a fire! Excessive
heat or improper handling could trigger a short circuit, a fire, or an explosion.
NOTICE
DANGER of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only
in accordance with the following safety information.
• Never disassemble the device. In the event of a fault, please contact your specialist retailer. The
specialist retailer will contact the service centre and send the device for repair if necessary.
• Do not expose the device to high temperatures and protect it from water and high humidity.
• Do not immerse the unit in water!
• Do not subject the device to excessive vibrations.
• For this device only use accessories and spare parts that comply with the technical information.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, com-
plete set of batteries at full capacity. Do not use batteries from different brands or with different ca-
pacities. Remove the batteries from the unit if it has not been used for a long time.
• Never use rechargeable batteries.

6 / 20
NOTICE
Risk of voltage damage!
The manufacturer is not liable for voltage damage due to improperly inserted batteries or through the
use of an improper power adapter!
5 Parts overview and scope of delivery
3
1
2
4
6
8
9
7
5
11
10
12 13
15 18
17
16
13
14
21 22
24
23
25
26
A
B
C
19
20
Illustration1: All parts of base station (left) and wireless sensor (right)
1 Housing (base station) 2 Display (base station)
3 SNOOZE/LIGHT touch key (snooze function
and temporary backlight)
4 Settings/Brightness key (custom settings or
change display brightness)
5 ALARM key (set alarm time) 6 UP/CH key (increase value or sensor channel
selection)

7 / 20
7 DOWN/WIFI key (decrease value or enable/
disable WIFI connection)
8 MEM key (display MIN and MAX values or de-
lete stored values)
9 Alarm slide control (enable/disable alarm) 10 Connection socket for DC barrel connector
11 USB connection socket (connection of ex-
ternal devices for charging purposes)
12 Battery compartment cover (base station)
13 Stand, fold-out (base station) 14 Battery compartment (base station)
15 Wall mount fixture (base station) 16 Housing (wireless sensor)
17 Function light (wireless sensor) 18 Display (wireless sensor)
19 °C/°F key (display change between °C and °F) 20 TX key (re-initiate data connection)
21 Sensor channel selector switch 22 Battery compartment cover (wireless sensor)
23 Battery compartment (wireless sensor) 24 Wall mount fixture (wireless sensor)
25 DC power adapter with EU power plug 26 DC Barrel connector
Scope of delivery:
base station (A), wireless sensor (B), power adapter (C)
Also required (not included):
2 pcs. Mignon batteries (1.5V, type AA/LR6) for radio sensor
2 pcs. Mignon batteries (1.5V, type AA/LR06) for base station
6 Screen display
1
25
24
23
22 18 15
21
8
7
510
11
12
13
14
17
19
2
3
4
20
6
9
16
Illustration2: Screen display of the weather station
1 Symbol for time transmission from the net-
work
2 Current time
3 Weekday (language adjustable globally) 4 Date (day-month or vice versa)
5 Symbol for enabled alarm 6 Symbols for enabled WIFI connection and
connection strength

8 / 20
7 Outdoor temperature (°C/°F adjustable
globally)
8 Outdoor humidity (RH in %)
9 Battery level indicator (base station) 10 Outdoor sensor channel with symbol for
enabled wireless connection
11 ‘Feels like’ temperature 12 Air pressure (hPa/mb)
13 Wind direction 14 Wind speed (km/h or mp/h adjustable)
15 Display of weekday, temperature values
and general weather forecast for the fifth
day
16 Battery level indicator (outdoor sensor)
17 Indoor humidity (RH in %) 18 Display of weekday, temperature values
and general weather forecast for the
fourth day
19 Indoor temperature (°C/°F adjustable glob-
ally)
20 Display of weekday, temperature values
and general weather forecast for the third
day
21 General weather forecast for the second /
next day
22 Daily minimum temperature (°C/°F ad-
justable globally) for the second/next day
23 Daily maximum temperature (°C/°F ad-
justable globally) for the second / next day
24 Weekday display for the second / next day
25 General weather forecast for the current
day
*if several sensors are connected (optional, not included)
7 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
5. Ensure that the base station and remote sensor are assigned to the same channel.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches!
8 Setting up power supply
Base device
1. Put the DC connector into the connection socket of the base station.
2. Put the mains plug into the power outlet.

9 / 20
3. The device is energized directly.
4. Wait until the indoor temperature is displayed on the base station.
NOTICE!For permanent operation, mains power supply is recommended. Alternatively a
power supply with batteries is also possible. Proceed as follows:
5. Remove the battery compartment cover.
6. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
7. Replace the battery compartment cover.
8. Wait until the indoor temperature is displayed on the base station.
NOTICE!When switching from mains power supply to battery power supply or vice versa,
the power supply is being disabled for a short moment for technical reasons. In this process
all settings made previously, will be deleted.
Remote sensor
9. Remove the battery compartment cover.
10. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
11. Set the channel selector switch to the desired channel (1, 2 or 3).
NOTICE!This weather station can be operated with up to 3 remote sensors. Each remote
sensor being connected must be operated on a different channel. If only one remote sensor
is connected, it should be operated on channel 1.
12. Replace the battery compartment cover.
9 Battery level indicator
1. When the level of the batteries in the base station or in the wireless sensor reaches a critical level,
the battery level symbol appears in the appropriate area on the display.
2. When replacing one set of batteries, always remove the batteries from the other part of the unit
and reinsert them in the correct order (see chapter "Setting up power supply"). Replace the batter-
ies to be changed in the corresponding part of the device with a completely new set with full capa-
city. This ensures that the connection between the devices will be reestablished again correctly.
10 Configuration / Setting up a WIFI connection
•This configuration requires a smartphone or tablet that is equipped with the required hard-
ware. Find more information in the chapter "Technical data".
•An active and reachable 2.4 GHz WIFI network as well as an active Bluetooth connection on
the smart device are required.
•The access data for the WIFI network to be used must be known.
Illustration3: Weathersense App: Installation and registration

10 / 20
1. Download and install the "WeatherSense" app on the smart device through Apple App Store or
Google Play. Direct links to go there:
https://itunes.apple.com/cn/app/weathersense/id1273633929?mt=8
https://play.google.com/store/apps/details?id=com.emax.weahter
•For the following registration a valid e-mail address is required. A confirmation will be sent
to this e-mail address after registration.
2. Start the app and follow the instructions to create an account (for free) and for registration.
3. Confirm the registration using the link in the e-mail confirmation.
4. Log in to the app with the username and password assigned during registration.
5. Put the Weather Station in operation as described.
Illustration4: Weathersense App: Setting up the WIFI connection
6. Press the WIFI key for about 3 seconds until "AP" is shown on the display.
7. Tap on <W003> in the "Connection method" app window.
8. Tap on the device <Weathertype> in the "Select device" app window.
9. In the "Choose Wi-Fi" app window, select the desired Wi-Fi network (Wi-Fi SSID).
10. Enter the correct password for the selected Wi-Fi network. The Wi-Fi connection (Bind device) will
be configured by the app. This may take a few minutes.
Illustration5: WeatherSense App: Establishing the connection between app and weather station
11. After successful connection setup, "Device binding successful" is displayed in the app. Tap on
<Continue>.
12. "AP" will automatically disappear from the Weather Station display. If not, press the Wi-Fi key for
about 3 seconds until "AP" disappears from the display.
13. Tap on <Done> in the "Location" app window.

11 / 20
14. The Wi-Fi connection between smart device/app and weather station will be established automat-
ically. This may take a few minutes. After successful connection, the icons for "Wi-Fi" and for the
signal strength as well as all available weather data will be displayed on the weather station's
screen.
15. NOTICE!In some cases, restrictions on the Internet connection (e.g. connection restrictions
due to firewall settings) may mean that a correct Wi-Fi connection could not be established.
In these cases an "Error" message is displayed in the app. Read the chapter "Troubleshoot-
ing" to find various ways to solve any problems.
11 Automatic time setting
After the power supply and the Wi-Fi connection are established, the time and date information is
automatically transmitted by the Internet time server.
If the reception is correct, the date and time are set automatically and the time transfer icon will be dis-
played.
If there is no automatic time setting, there may be a problem with the Wi-Fi connection. Read the
chapter "Troubleshooting" for possible solutions.
If the automatic time setting furthermore is not working, the time must be set manually. Please read
the chapter "Manual time setting and other user-defined settings".
12 Manual time setting and other user-defined
settings
1. Press the Settings/Brightness key for approx. 3 seconds to enter the settings mode.
2. Digits to be set are flashing.
3. Press UP/CH key or DOWN/WIFI key to change the setting.
4. Press the Settings/Brightness key to confirm and switch to the next setting.
5. Settings sequence: Temperature unit (°C or °F) > Air pressure unit (hPa or mb) > Wind speed unit
(km/h or mph) > 12 or 24 hour mode > Time zone (-12 to +12 hours) > Hours > Minutes > Date
display (M/D or D/M) > Year > Month > Day > Language of weekday information
6. Finally, press the Settings/Brightness key to save the settings and exit settings mode.
NOTICE!If no setting is made within 20 seconds, all settings made up to that point are saved
and the base station will switch back to normal display mode. For manual time setting, the Wi-Fi
connection must be disconnected.
13 Alarm setting
1. Press the Alarm key to display the alarm time.
2. Press the Alarm key for approx. 2 seconds to enter the alarm time settings mode.
3. Digits to be set are flashing.
4. Press UP/CH key or DOWN/WIFI key to change the setting.
5. Press the Alarm key to confirm and switch to the next setting.
6. Settings sequence: Hours > Minutes > Snooze interval (5 to 60 minutes or OFF)
7. Finally, press the Alarm key to save the settings and exit settings mode.
8. Move the alarm slider to position to enable the alarm. The symbol will displayed on the LCD.
The alarm is enabled.
9. Move the alarm slider to position to disable the alarm. The symbol is no longer displayed. The
alarm is disabled.

12 / 20
14 Snooze function
1. When the alarm sounds, press the SNOOZE/LIGHT touch key to enable the snooze function. The
alarm sounds again after the set time interval has elapsed (see "Alarm setting").
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.
NOTICE!If 'OFF' is selected for the snooze interval in the alarm time settings, the snooze func-
tion is not available.
15 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
16 3D weather forecast from the Internet
•This functionality requires a smartphone or tablet that meets the necessary hardware re-
quirements.
•An active Internet connection via Wi-Fi is required for this functionality.
The base station can graphically display weather data from the Internet for the current and the next 4
days by using an app. (For more information on setting up this functionality, refer to the chapter "Con-
figuration / Setting up a WIFI connection")
The different weather constellations are displayed on the base station as follows:

13 / 20
12345
678910
11 12 13 14 15
16 17 18 19 20
Illustration6: Symbols for 3D weather forecast
1 Sunny 2 Mostly sunny
3 Partly Cloudy 4 Mostly cloudy
5 Cloudy 6 Scattered rain
7 Mostly rain 8 Rain showers
9 Heavy rain 10 Thunder & rain
11 Rain & hail 12 Hail
13 Snow & hail 14 Scattered snow
15 Mainly snow 16 Snow showers
17 Heavy snow 18 Sleet
19 Fog or haze 20 Windy
17 Wind speed and wind direction
•This functionality requires a smartphone or tablet that meets the necessary hardware re-
quirements.
•An active Internet connection via Wi-Fi is required for this functionality.
The base station can use an app to graphically display information from the Internet for wind speed
and wind direction in the "Wind" display area. (For more information on setting up this functionality,
refer to the chapter "Configuration / Setting up a WIFI connection")

14 / 20
18 Feels like temperature
•This functionality requires a smartphone or tablet that meets the necessary hardware re-
quirements.
•An active Internet connection via Wi-Fi is required for this functionality.
The base station can use an app to graphically display information about the temperature felt in the
"Feels like" display area. (For more information on setting up this functionality, refer to the chapter
"Configuration / Setting up a WIFI connection")
The "Feels like" temperature indicates the temperature value according to the personal temperature
sensation.
19 MAX/MIN weather data
The maximum and minimum readings for indoor and outdoor temperature as well as for the humidity
are stored by the main unit over a period of 24 hours:
1. Press the MEM key several times to display the stored values one after the other.
2. Display sequence: Maximum readings (MAX) > Minimum readings (MIN) > Current readings
3. Press the MEM key for approx. 2 seconds to permanently delete all stored readings.
NOTICE!If a reading is below the recordable range, the display shows "LL.L". If a reading is
above the recordable range, the display shows "HH.H". Find more detailed information on the
recordable ranges in chapter "Technical data".
20 Temperature and humidity display from the
wireless sensor
After the power supply is established, the base station automatically searches for the radio signal from
the sensor. After the data transfer is complete, the temperature and humidity readings for the respect-
ive channel are shown on the display. This may take a few minutes.
The base station supports the connection of up to 3 compatible wireless sensors*. To retrieve the tem-
perature and humidity readings from different sensors, proceed as follows:
1. Press the UP/CH key several times to display the readings for the different sensors one after the
other. The corresponding sensor channel is shown in the display.
2. Press the UP/CH key several times until the symbol appears on the display next to the sensor
channel. The display alternates continuously between the sensor channels until a certain channel
is permanently set.
*1 pc. of wireless sensor included, others optionally available
21 Display brightness regulation
1. In battery-powered operation, touch the SNOOZE/LIGHT touch key to enable full display bright-
ness for about 15 seconds.
2. In mains power operation (DC 5V), press the Settings/Brightness key several times to set the de-
sired display brightness in 3 levels: low - medium - bright
NOTICE!In battery-powered operation, display brightness adjustment is not possible.
22 Technical data
Base station

15 / 20
Power supply DC 5V / 1.2A mains power adapter
2 x 1.5V batteries, type AA/LR6
Indoor temperature measuring range -20°C to 60°C ( -4°F to 140°F )
Indoor humidity measuring Range 20% to 95% (RH)
Data display from the Internet* Air pressure, wind speed/direction, "Feels like"
temperature, weather forecast
Dimensions (W x H x D) 205 x 130 x 35 mm
Weight 368g (incl. mains power adapter, without batter-
ies)
*This functionality requires a smart device with required hardware and an active Internet con-
nection via Wi-Fi.
Wireless outdoor sensor
Batteries 2 pcs. of 1.5V batteries, type AA/LR6
Maximum number of sensors 1 pc. of thermo-hygrosensor (incl.)
2 pcs. of thermo-hygrosensor (optional,
#7009992)
RF transmission frequency 433MHz
RF transmission range approx. 60m (in open terrain)
Maximum RF power < 10mW
Outdoor temperature measuring range -40°C to 70°C (-40°F to 158°F)
Outdoor humidity measuring range 20% to 95% (RH)
Protection class IPX4
Dimensions (W x H x D) 50 x 96 x 34 mm
Weight 54g (without batteries)
Wi-Fi specifications
Wi-Fi standard 802.11 b/g/n
Wi-Fi operating frequency 2.4 to 2.4835 GHz
Maximum RF power <100mW
Supported devices see hardware requirements
NOTICE!The name of the Wi-Fi network (SSID) must not contain any spaces and/or special char-
acters!
Hardware requirements for smart devices
Supported device types Smartphone, Tablet PC
Operating system Apple iOS (version 9.0 or higher)
Android (version 4.0.3 or higher)
Wi-Fi standard support 802.11 b/g/n required
Bluetooth support Version 4.1 or higher
Access point support required
23 Troubleshooting
The app reports a general connection error (Error 1003).
• Data transmission from the Internet is not yet complete. Wait 30 minutes and start the app again.
• If the error message "Error 1003" persists, check the Wi-Fi connection. (see next point)
The app reports an error while establishing the Wi-Fi connection (failed to connect).

16 / 20
• The app is not working correctly. Close the app and restart it.
• The Wi-Fi network connected to the weather station through the app is not available/disabled. En-
able Wi-Fi network and restart the app.
• The Wi-Fi network used does not meet the technical requirements (see "Technical Data"), which
limits the use with this device. Choose a Wi-Fi network that meets the technical requirements. Per-
form the setup through the app again (see next point).
• Wi-Fi network connection setup was not successful. Perform the setup through the app again:
1. Tap on <Device> in the app menu.
2. Tap on <Reconfigure> under "My device".
3. Tap on <Next> under "Location" and run through the setup process again (see chapter "Configura-
tion / Setting up a WIFI connection"). Make sure that the password for the Wi-Fi connection is
entered correctly.
The weather data from the weather station is not transmitted to the app.
• The app is not working correctly. Close the app and restart it.
• A Wi-Fi connection could not be established. See the procedure above.
No temperature and humidity readings are shown on the display.
• The radio connection to the corresponding sensor is disturbed. Press the UP/CH key for about 3
seconds to re-establish the radio connection. If necessary, also reduce the distance between base
station and radio sensor.
• If connection problems persist, disconnect the base station and radio sensor(s) from the power
supply and reconnect the power supply.
24 EC Declaration of Conformity
Hereby, Bresser GmbH declares that the equipment type with item number 7001040 : is in compli-
ance with Directive: 2014/30/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.bresser.de/download/7001040/CE/7001040_CE.pdf
25 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic
equipment and its adaptation into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
Do not dispose of batteries and rechargeable batteries with the household waste. You are leg-
ally required to return used batteries and rechargeable batteries. After they are used, the bat-
teries can be returned free of charge to our point of sale or to a nearby location (for example,
retailers or municipal collecting points).
Batteries and rechargeable batteries are marked with a symbol of a crossed-out dustbin and
the chemical symbol of the pollutant. “Cd” stands for Cadmium, “Hg” stands for mercury and
“Pb” stands for lead.

17 / 20
26 Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an exten-
ded voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and
details of our services at www.bresser.de/warranty_terms.

DE AT CH BE
Bei Fragen zum Produkt und eventuellen
Reklamationen nehmen Sie bitte zunächst mit
dem Service-Center Kontakt auf, vorzugsweise
per E-Mail.
E-Mail: [e-mail]
Telefon*: [phone]
BRESSER GmbH
Kundenservice
Gutenbergstr. 2
46414 Rhede
Deutschland
* Lokale Rufnummer in Deutschland (Die Höhe der Gebühren je
Telefonat ist abhängig vom Tarif Ihres Telefonanbieters); Anrufe aus
dem Ausland sind mit höheren Kosten verbunden.
GB IE
Please contact the service centre first for any
questions regarding the product or claims,
preferably by e-mail.
e-mail: ser[email protected]
Telephone*: [phone]
BRESSER UK Ltd
Suite G3, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom
* Number charged at local rates in the UK (the amount you will be
charged per phone call will depend on the tariff of your phone
provider); calls from abroad will involve higher costs.
FR BE
Si vous avez des questions concernant ce
produit ou en cas de réclamations, veuillez
prendre contact avec notre centre de services
(de préférence via e-mail).
e-mail: [e-mail]
Téléphone*: 00 800 6343 7000
BRESSER France SARL
Pôle d'Activités de Nicopolis
260, rue des Romarins
83170 Brignoles
France
* Prix d'un appel local depuis la France ou Belgique
Service
NL BE
Als u met betrekking tot het product vragen
of eventuele klachten heeft kunt u contact
opnemen met het service centrum (bij voorkeur
per e-mail).
e-mail: [email protected]
Teléfono*: [phone]
Folux B.V.
Smirnoffstraat 8
7903 AX Hoogeveen
Nederlands
* Het telefoonnummer wordt in het Nederland tegen lokaal tarief
in rekening gebracht. Het bedrag dat u per gesprek in rekening
gebracht zal worden, is afhankelijk van het tarief van uw telefoon
provider; gesprekken vanuit het buitenland zullen hogere kosten
met zich meebrengen.
ES PT
Si desea formular alguna pregunta sobre el
producto o alguna eventual reclamación, le
rogamos que se ponga en contacto con el
centro de servicio técnico (de preferencia por
e-mail).
e-mail: servicio.iberia@bresser-iberia.
es
Teléfono*: [phone]
BRESSER Iberia SLU
c/Valdemorillo,1 Nave B
P.I. Ventorro del cano
28925 Alcorcón Madrid
España
* Número local de España (el importe de cada llamada telefónica
dependen de las tarifas de los distribuidores); Las llamadas des del
extranjero están ligadas a costes suplementarios.