Bretford MSB-W4 User manual

SUBSTATION WALL INFEED
MODEL:
AssemblyInstructions
LIQUID™WORKSPACE
CAUTION:
Turn off all power prior to connecting or disconnecting
the liquid electrical components.
MSB-W4
MSB-W6

STEP 1
RemoveSubstationTopCoverby pulling it up.
Fig. 1
Steps to connect Wall Infeed to Junction Box

CoverPin
Plate
Cover Pin Plate
Bolt
Substation
Spider
STEP 2
DisassembleCover Pin Plate andSubstation Spider by unfasteningtheCover Pin
Plate Hex Head Bolts. Save hardware for reassembling.
Fig. 2

VisualBlocker
Visual Blocker Screw
STEP 3
DisassembleVisualBlocker by unfastening the threeVisualBlocker
Round Head Screws. Save hardware for reassembling.
Fig. 3

Substation
Substation
partsremoved
forclarity
Wall
monument
Infeed
Infeed
openend
Junction
Box
The open end of the Infeed is
to be installed by a certified
electrician.
STEP 4
Connecttheopenendofthe Infeed to the WallMonument Power(this has to be in-
stalled by a certified electrician).Plugtheotherend of Infeed to JunctionBox(Fig. 4).
Reassemble metal visual blockers and other components. Replace Lid.
Fig.4
Note:
Part#031-6467
Rev.07.15.03 IM
Bretford Bretford Ltd.
11000 Seymour Avenue Technology House
Franklin Park, IL 60131 7 Lake End Court, Taplow
TEL: [phone] Bucks SL6 0JQ England
800.521.9614 TEL: [phone]
FAX: [phone] FAX: [phone]
800.343.1779
www.bretford.com