Bretford MSP-C144 User manual

POWER POLE SUPPORT
MODEL:
AssemblyInstructions
PARTS LIST
Qty Part No. Description
1 039-0200 RACEWAY POWERPOLE-144”
1 039-0008 SUPPORT TOPCOVER
1 039-0315 PLUG-OPEN3/4”OVALCONDUIT
1 010-3945 COVERPLATE-POWER POLE
Qty Part No. Description
1 044-1713 HARDWAREPACK
(4 EA. 1/4-20 x 3/4” HEX HD.SCW.)
HARDWARE LIST
TOOLS REQUIRED
KEY HOLE SAW
3/8”SOCKETWRENCH
MSP-C144
SAFETY WARNING
Note: TWO PERSON
ASSEMBLY REQUIRED
LIQUID™WORKSPACE
CAUTION:
Turn off all power prior to connecting or disconnecting
the liquid electrical components.

STEP 1
Remove TopCover. Discardexisting TopCover. Use thenew
TopCover withan ovalcutout inthe center.
Fig. 1
TopCover
Support must be anchored to floor when used for power
infeed. See Substation instruction sheets for anchoring
instructions.
Note:

CoverPin
Plate
Cover Pin Plate
HexBolt
STEP 2
DisassembleCover Pin Plate byunfasteningthe Cover PinPlateHex Bolts.Save
hardware for reassembling.
Fig. 2

Determinethe exactfloor location,theorientation ofthe ovalcutoutand thecenter of
theSupport which thepower polewillmount onto.Position Supportandmark floor.
Usea plumb lineto locatethecenter andthedirection ofovalcutout ontheceiling
requiredto allow thepower poletopass throughtheceiling. Markcenterand high
pointsof ovalcutout onthe ceiling.
Positionthe oval escutcheonring usingthemarks ontheceiling andassuringthe ovalis
orientatedcorrectly tomatch theovalin theSupport. Tracethe insideoval andmarkmount-
inghole locations. Cutoval shapealongline withcuttingblade positionedoutsidethe line.
Drill4 holes for recommended1/4”dia. expansion bolts.Boltspass thru orfasten
into(drywall).
STEP 3
STEP 4
Fig. 3
STEP 5
TopCover
Power Pole
EscutcheonRing
Slideoval Escutcheon Ring andTopCover overpowerpole (Fig. 3).
Support
end.

Fig.4
STEP6
Top Cover
PowerPole
Ceiling
EscutcheonRing
Support end.
PowerPole
attachmentBolt FastenTop Plateto PowerPole with fourPower Poleattachment Bolts
(provided)(Fig. 4).
Top Plate
PowerPole
Assembly
DataRaceway
PowerInfeed
Raceway

DataRaceway
Power
Infeed
ToHarnessintheChannel
Fig.5
STEP7
ThreadFish Tapethrough the Power Polepower in feed raceway(seeFig. 4).
AttachFish Tapeto open (wires) endofPower Infeed andpullto install (Fig.5).
OpenEnd Of
PowerInfeed

Fig. 6
STEP 8
SlidePower Pole thrucutoutin ceiling. Positionandalign Support underPower
Pole.Slide Escutcheon Ringup toceilingand fastenwithfour 1/4”fasteners(not
supplied)(Fig.6).
Escutcheon
Ring
Power Pole
Assembly
Ceiling end
Ceiling
1/4”Fastener

Power Pole
Assembly
TopPlate
HexHead Bolt
Support
Assembly
Fig. 7
STEP 9
AttachPower Pole Assembly toSupport Assembly
withTopPlateHex Head Bolts (Fig. 7).

TopCover
Fig. 8
STEP 10
Slide down Top Cover (Fig. 8).
Part#031-6583
Rev.07.21.03 IM
Bretford Bretford Ltd.
11000 Seymour Avenue Technology House
Franklin Park, IL 60131 7 Lake End Court, Taplow
TEL: [phone] Bucks SL6 0JQ England
800.521.9614 TEL: [phone]
FAX: [phone] FAX: [phone]
800.343.1779
www.bretford.com