Breville BEF450 User manual

www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2010.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
BEF450 Issue - A11
Australian Customers
Mail: PO Box 22
Botany NSW 2019
AUSTRALIA
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163
Auckland NEW ZEALAND
Phone: [phone]
Fax: [phone]
Email: Customer Service:
[e-mail]
Breville Customer Service Centre

BEF450
the Thermal Pro Non-stick™
Instruction Booklet

CONGRATULATIONS
on the purchase of your new
Breville Thermal Pro Non-stick™

3
CONTENTS
4 Breville recommends safety first
6 Know your Thermal Pro
Non-stick™
8 Operating your Thermal Pro
Non-stick™
11 Care & cleaning
14 Cooking techniques & tips
19 Recipes

4
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Do not place frypan near the edge of a
bench or table during operation. Ensure
the surface is level, clean and free of
water.
• Remove any promotional stickers before
using the frypan for the first time.
• Do not place the frypan on or near a hot
gas or electric burner, or where it could
touch a heated oven. Place frypan at
least 20cm away from walls and curtains.
• Do not use on metal surfaces, for
example, a sink drain board.
• Always insert Temperature Control
Probe into probe socket and ensure is
fully inserted, before inserting power
plug into power outlet and switching
on appliance. Ensure the probe socket
is completely dry before inserting the
Temperature Control Probe.
• Ensure the cord is not touching the hot
pan.
• To protect against electric shock, do not
immerse cord or Temperature Control
Probe in water or any other liquid.
• Ensure the Temperature Control Probe
has cooled before removing from the
appliance.
• Always remove Temperature Control
Probe before cleaning the appliance.
• Only the Temperature Control Probe
included with the frypan must be used.
• If using plastic utensils, do not leave in
frypan when hot.
• Never immerse cord and/or heat probe
in water or any other liquid.
• Do not place hot glass lid under cold
water.
• Extreme caution must be used when
the appliance contains hot oil or other
liquid. Do not move the appliance
during cooking. Allow the frypan to cool
before removing oil or other liquid.
• Place frypan at least 200mm away from
walls and curtains.
• Do not touch hot surfaces.
• Do not leave the appliance unattended
when in use.
• Always turn the Temperature Control
Probe to the large dot, then switch off
at the power outlet and allow probe to
cool, then remove probe and unplug, if
appliance is to be left unattended, if not
in use and before cleaning.
• Keep the appliance clean. Follow the
cleaning instructions provided in this
book.
• Always use the appliance on a dry, level
surface.
IMPORTANT SAFEGUARDS

5
BREVILLE RECOMMENDS SAFETY FIRST
5
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the cord before use.
• Do not let the cord hang over the edge of
a table or counter, touch hot surfaces, or
become knotted.
• This appliance is not intended for use
by young children or infirm persons
without supervision.
• Young children should be supervised
to ensure that they do not play with the
appliance.
• The appliance is not intended to be
operated by means of an external timer
or a separate remote-control system.
• It is recommended to inspect the
appliance regularly. Do not use the
appliance if power supply cord, plug,
probe or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for other than
its intended use.
• Do not use in moving vehicles or boats.
Do not use outdoors.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Always switch appliance off, then switch
off at the power outlet, then unplug
the appliance when not in use, before
attempting to move appliance and
before cleaning.
SAVE THESE
INSTRUCTIONS

KNOW
your Thermal Pro Non-stick™

7
KNOW YOUR THERMAL PRO NON-STICK™
A. Large 39(L) x 31(W) x 7.8(H)cm
banquet shaped frypan
Dishwasher safe.
B. Toughened glass high domed lid
Dishwasher safe.
C. Steam vent hole
Suitable size for insertion of meat probe.
D. Cast stainless steel handles
E. Cast-in butterfly element
2400 watts of power, provides even
distribution of heat over the entire
cooking surface.
F. Premium non-stick cooking surface
For Easy Cleaning.
G. Non-slip feet
H. Pan tilt lever
I. Precise variable temperature control
With 15 heat settings including SEAR.
J. Trivet
For steaming and roasting.
K. Pouring Spout
B
FE
K
IH
G
A C D
J

OPERATING
your Thermal Pro Non-stick™

9
OPERATING YOUR THERMAL PRO NON-STICK™
BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Wash your
frypan and lid in hot soapy water. Rinse and
dry thoroughly.
Do not immerse the cord, plug and/or
Temperature Control Probe in water or any
other liquid.
1. Insert the Temperature Control Probe
into the probe socket on the appliance.
Plug into a 230/240V power outlet and
switch ‘On’. Always insert the probe into
the appliance first, then insert plug into
power outlet.
NOTE
Before inserting the Temperature
Control Probe into the probe socket,
ensure the interior of the socket is
completely dry. To do this, shake out
excess water then wipe the interior of
the socket with a dry cloth.
2. Turn the dial on the Temperature
Control Probe clockwise to the desired
setting. The red heating light on the
probe will illuminate.
3. The red heating light will remain
illuminated until the frypan reaches
the desired temperature. Once the
temperature has been reached, the red
light will cycle ‘On’ and ‘Off’ during
cooking to maintain the desired
temperature.
4. When cooking is completed, turn the
dial anti clock-wise until the large dot is
aligned with the red heating light.
Cooking
Off
Switch off at the power outlet and unplug.
5. Leave the Temperature Control Probe
connected to the appliance until cool.
NOTE
This frypan must be used with the
Temperature Control Probe provided.
Do not use any other probe or
connector.