Breville Perfect Press BSG600 User manual

the Perfect Press™
Instruction Book - BSG600

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
IMPORTANT
SAFEGUARDS
READ ALL
INSTRUCTIONS BEFORE
USE AND SAVE FOR
FUTURE REFERENCE
•Remove and safely
discard any packaging
material or promotional
labels before using the
sandwich press for the
first time.
•To eliminate a choking
hazard for young children,
remove and safely discard
the protective cover fitted
to the power plug of this
appliance.
•Ensure that the surface
where the appliance
operates is stable, level,
clean and dry.
•When using this
appliance, provide
adequate air space above
and on all sides for
circulation.
2 Breville Recommends Safety First
6 Components
7 Functions
9 Care & Cleaning
10 French
Contents

3
•Keep a minimum distance
of 4" (10cm) of space from
the surrounding sides and
8" (20cm) above.
•The appliance is not
intended for use by
persons (including
children) with reduced
physical, sensory or
mental capabilities,
or lack of experience
and knowledge, unless
they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their
safety.
•Do not leave the appliance
unattended when in use.
•Keep the appliance clean.
Refer to care and cleaning
section.
•If any of the contained
instructions or warnings
are not understood please
contact Breville Consumer
Support for assistance.
ADDITIONAL
SAFEGUARDS
When using electrical
appliances, basic safety
precautions should always
be followed, including
the following:
•To protect against
electrical shock do not
immerse cord, plugs, or
this appliance in water or
any other liquid.
•Close supervision is
necessary when any
appliance is used by or
near children.
•Unplug from outlet
when not in use and
before cleaning. Allow
to cool before adding
or removing parts, and
before cleaning the
appliance.

4
•Do not operate any
appliance with a damaged
cord or plug or after the
appliance malfunctions,
or has been damaged
in any other manner.
Immediately cease
use and call Breville
Consumer Support for
examination, repair or
adjustment.
•The use of accessory
attachments not
recommended by Breville
may cause injuries.
•Do not use outdoors.
•Do not let the cord hang
over the edge of tables,
counters, or touch hot
surfaces.
•Do not place on or near a
hot gas or electric burner,
or in a heated oven.
•Do not touch hot surfaces.
Appliance surfaces are
hot during and after
operation.
•To prevent burns or
personal injury, always
use protective hot pads or
insulated oven mitts, or
use handles or knobs.
•Extreme caution must
be used when moving an
appliance containing hot
oil or other liquids.
•To disconnect, turn any
control to off, then remove
plug from wall outlet.
•Do not use appliance for
other than intended use.
•The appliance is not
intended to be operated
by means of an external
timer or separate remote-
control system.
IMPORTANT
Fully unwind the power
cord from the cord storage
facility before use.

5
SHORT CORD
INSTRUCTIONS
Your Breville appliance
is fitted with a short
power supply cord to
reduce personal injury or
property damage resulting
from pulling, tripping or
becoming entangled with a
longer cord.
If an extension cord is
used,
(1) the marked electrical
rating of the cord set or
extension cord should
be at least as great as the
electrical rating of the
appliance, (2) the cord
should be arranged so
that it will not drape over
the countertop or table-
top where it can be pulled
on by children or tripped
over unintentionally and
(3) the extension cord
must include a 3-prong
grounding plug.
BREVILLE ASSIST®PLUG
Your Breville appliance
comes with a unique
Assist®Plug, conveniently
designed with a finger hole
to ease removal from the
power outlet.
CALIFORNIA
PROPOSITION 65:
(Applicable to California
residents only).
This product contains
chemicals known to the
State of California to cause
cancer, birth defects or
other reproductive harm.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6
Components
CG D
HI
F
B
E
A
A. Top plate handle
B. Top plate
C. Flat non-stick cooking plates
For extra crispy toasted results.
Lower cooking plate has easy wipe corners.
D. On/Off switch
E. ‘Power’ and ‘Ready’ lights
Indicate when the sandwich press is
heating or ready to use.
F. Adjustable Height Control clip
With 3 settings for OPEN MELT,
CRUSH CONTROL and LOCK position
for vertical storage.
G. Non-slip feet
H. Convenient cord wrap in base
I. Power cable with Breville Assist®Plug

7
Functions
BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Check that the
cooking plates are clean and free of dust.
If necessary, wipe over with a damp cloth.
When using the sandwich press for the
first time you may notice a fine smoke haze.
This is caused by the heating of some of the
components. There is no need for concern.
NOTE
• Always allow the sandwich press to pre-heat
until the green ‘READY’ light illuminates.
• The LOCK position is for the storage only.
It should not be used to clamp down the top
cooking plate when sandwiches are in the
sandwich press.
CRUSH CONTROL
TOASTED SANDWICH
This setting will reduce the weight of the top
cooking plate, giving fluffy cooking results
similar to cooking in a frying pan.
1. Insert the power plug into a 120V power
outlet. Switch the On/Off switch to the ON
position. The orange ‘POWER’ light will
illuminate.
2. Allow the sandwich press to preheat with
the top cooking plate in the closed position
until the green ‘READY’ light illuminates.
3. Place sandwich on the bottom cooking
plate. Always place sandwiches in the
center of the bottom cooking plate.
4. Move the Adjustable Height Control clip on
the right hand side of the sandwich press to
the CRUSH CONTROL position.
5. Close the top cooking plate. The top
cooking plate has a crush control hinge
that is designed to evenly and lightly press
down the sandwich.
6. Toasting should take approximately
3–5 minutes. Exact toasting time will be a
matter of taste. It will also depend on the
type of bread and type of filling used.
7. When the sandwich is cooked, use the
handle to open the sandwich press and
raise the top cooking plate. Remove
sandwich with a plastic or wooden spatula.
Never use metal tongs or a knife as these
can cause damage to the non-stick coating.
CAUTION
HOT SURFACE - The temperature of
accessible surfaces may be high when the
appliance is operating.
Fully unwind the cord from the cord storage
area before use.

8
OPEN SANDWICH MELTS
1. Insert the power plug into a 120V power
outlet. Switch the On/Off switch to the ON
position. The orange ‘POWER’ light will
illuminate.
2. Allow the sandwich press to preheat with
the top cooking plate in the closed position
until the green ‘READY’ light illuminates.
3. Place sandwich to be melted on the bottom
plate. Always place sandwiches in the
center of the bottom cooking plate.
4. Open the lid and move the Adjustable
Height Control clip on the right hand side
of the sandwich press to OPEN MELT
position.
5. Slowly lower the top plate until it sits in the
OPEN MELT position.
6. The top plate will radiate the desired heat to
melt ingredients such as cheese.
7. Toasting melts should take approximately
5–7 minutes. However, exact toasting time
will be a matter of taste. It will also depend
on how far the food is away from the
top plate.

9
Care & Cleaning
Before cleaning, switch the On/Off switch
to the Off position and unplug the sandwich
press. Allow your sandwich press to cool before
cleaning.
Always clean your sandwich press after each
use to prevent a buildup of baked-on foods.
Wipe cooking plates with a soft cloth. If cooked
on food is not removed by this method reheat
the unit for 1–2 minutes, then brush with a little
oil or melted butter.
NOTE
• The cooking plates are coated with a
non-stick surface; do not use abrasives.
• Do not use spray-on non-stick coatings as
this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
1. Switch the On/Off switch to the Off
position and unplug the sandwich press.
2. Allow the sandwich press to fully cool.
3. Move the Adjustable Height Control clip on
the right hand side of the sandwich press to
LOCK position so that the top and bottom
cooking plates are locked together.
4. Wrap the power cord in the cord storage
area below the appliance.
5. The sandwich press is designed to be stored
at upright position for compact storage.
Store on a flat, dry, level surface.
WARNING
DO NOT IMMERSE ANY PART OF THE
BREVILLE SANDWICH PRESS IN WATER
OR ANY OTHER LIQUID.
Any other servicing should be performed by
an authorized service representative.

the Perfect Press™
Manuel d'instructions - BSG600