Breville HeatSoft VFM027 User manual

HeatSoftTM
Stand Mixer VFM027
VFM027_22EM1 (UK).indd 1VFM027_22EM1 (UK).indd 1 2022/4/6 8:49 AM2022/4/6 8:49 AM

23
This appliance is intended to be used in household and similar applications such as:
!Staff kitchen areas in shops, ofces and other working environments;
!Farm houses;
!By clients in hotels, motels and other residential type environments;
!Bed and breakfast type environments.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Always use the appliance on a stable, secure, dry and level surface.
!This appliance must not be placed on or near any potentially hot surfaces (such
as a gas or electric hob).
!Never immerse any part of the appliance or power cord and plug in water or
any other liquid.
!Never let the power cord hang over the edge of a work top, touch hot surfaces
or become knotted, trapped or pinched.
!Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
!Never use any accessory or attachment not recommended by the
manufacturer.
!Remove attachments from the appliance before washing or cleaning them.
!Keep ngers, hair and clothing away from the moving parts of the appliance
when it is in use.
!Do not attempt to eject, t or remove attachments until the appliance has come
to a complete stop.
!This appliance generates heat when using the heating function. Do not touch
hot surfaces, such as the bowl and accessories. Allow to cool before handling.
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children. Cleaning
and user maintenance shall not be made by children
without supervision.
This appliance is not intended for use by persons whose
physical, sensory or mental capabilities are reduced or
lack of experience or knowledge, unless such persons
are supervised or trained to operate the appliance by a
person responsible for their safety. Close supervision is
necessary if you use the appliance near children or people
with disabilities.
Always disconnect the appliance from the mains supply
socket if it is left unattended and before assembling,
disassembling or cleaning.
Always allow the appliance to cool down before
assembling, disassembling, cleaning or before storage.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
All accessories (beaters, dough hook and whisk) should
not be used for longer than 15 minutes. When mixing
extremely heavy loads the appliance should not be
operated for more than 10 minutes.
This appliance has an internal safety feature to prevent
overheating. If the mixer shuts down because of
overheating, reset the speed control knob to OFF, wait 30
minutes to allow to cool completely. Unplug and plug back
in, then turn mixer ON again.
product safety product safety
VFM027_22EM1 (UK).indd 2-3VFM027_22EM1 (UK).indd 2-3 2022/4/6 8:49 AM2022/4/6 8:49 AM

23
This appliance is intended to be used in household and similar applications such as:
!Staff kitchen areas in shops, ofces and other working environments;
!Farm houses;
!By clients in hotels, motels and other residential type environments;
!Bed and breakfast type environments.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Always use the appliance on a stable, secure, dry and level surface.
!This appliance must not be placed on or near any potentially hot surfaces (such
as a gas or electric hob).
!Never immerse any part of the appliance or power cord and plug in water or
any other liquid.
!Never let the power cord hang over the edge of a work top, touch hot surfaces
or become knotted, trapped or pinched.
!Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
!Never use any accessory or attachment not recommended by the
manufacturer.
!Remove attachments from the appliance before washing or cleaning them.
!Keep ngers, hair and clothing away from the moving parts of the appliance
when it is in use.
!Do not attempt to eject, t or remove attachments until the appliance has come
to a complete stop.
!This appliance generates heat when using the heating function. Do not touch
hot surfaces, such as the bowl and accessories. Allow to cool before handling.
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children. Cleaning
and user maintenance shall not be made by children
without supervision.
This appliance is not intended for use by persons whose
physical, sensory or mental capabilities are reduced or
lack of experience or knowledge, unless such persons
are supervised or trained to operate the appliance by a
person responsible for their safety. Close supervision is
necessary if you use the appliance near children or people
with disabilities.
Always disconnect the appliance from the mains supply
socket if it is left unattended and before assembling,
disassembling or cleaning.
Always allow the appliance to cool down before
assembling, disassembling, cleaning or before storage.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
All accessories (beaters, dough hook and whisk) should
not be used for longer than 15 minutes. When mixing
extremely heavy loads the appliance should not be
operated for more than 10 minutes.
This appliance has an internal safety feature to prevent
overheating. If the mixer shuts down because of
overheating, reset the speed control knob to OFF, wait 30
minutes to allow to cool completely. Unplug and plug back
in, then turn mixer ON again.
product safety product safety
VFM027_22EM1 (UK).indd 2-3VFM027_22EM1 (UK).indd 2-3 2022/4/6 8:49 AM2022/4/6 8:49 AM

45
features and parts
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Attachment shaft
2. SmoothScrape™ beater
3. HeatSplash™ guard
4. 5.2l stainless steel bowl
5. Bowl locking plate
6. Mixer head
7. Speed control dial
8. Tilt release lever to raise and lower head
9. Heat nozzles for HeatSoftTM technology
10. HeatSoftTM heat settings - melt, soften and on/off.
11. LED light
6
1
2
3
4
5
7
8
9
10
11
Learning about your stand mixer
The Breville® stand mixer with HeatSoftTM technology has been designed to allow
you to bake when inspired. No more waiting for ingredients to reach room
temperature! Now you can soften, melt and mix in one step!
Did you know?
Many recipes for baking require ingredients to be at room temperature. Butter will
only reach room temperature after hours of sitting on the counter. If you use butter
that’s cold, straight from the refrigerator, it will result in heavy and dense baked
goods. Butter that is microwaved or melted can create an oily batter resulting in
soggy, at cookies. Using room temperature ingredients creates ufer results and
better baked goods.
HeatSoftTM Technology
The HeatSoftTM Technology uses gentle heat to bring cold ingredients to room
temperature while mixing, eliminating the need to plan ahead. HeatSoftTM
technology easily allows for butter to be softened and chocolate to be melted.
features and parts
VFM027_22EM1 (UK).indd 4-5VFM027_22EM1 (UK).indd 4-5 2022/4/6 8:49 AM2022/4/6 8:49 AM

45
features and parts
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1. Attachment shaft
2. SmoothScrape™ beater
3. HeatSplash™ guard
4. 5.2l stainless steel bowl
5. Bowl locking plate
6. Mixer head
7. Speed control dial
8. Tilt release lever to raise and lower head
9. Heat nozzles for HeatSoftTM technology
10. HeatSoftTM heat settings - melt, soften and on/off.
11. LED light
6
1
2
3
4
5
7
8
9
10
11
Learning about your stand mixer
The Breville® stand mixer with HeatSoftTM technology has been designed to allow
you to bake when inspired. No more waiting for ingredients to reach room
temperature! Now you can soften, melt and mix in one step!
Did you know?
Many recipes for baking require ingredients to be at room temperature. Butter will
only reach room temperature after hours of sitting on the counter. If you use butter
that’s cold, straight from the refrigerator, it will result in heavy and dense baked
goods. Butter that is microwaved or melted can create an oily batter resulting in
soggy, at cookies. Using room temperature ingredients creates ufer results and
better baked goods.
HeatSoftTM Technology
The HeatSoftTM Technology uses gentle heat to bring cold ingredients to room
temperature while mixing, eliminating the need to plan ahead. HeatSoftTM
technology easily allows for butter to be softened and chocolate to be melted.
features and parts
VFM027_22EM1 (UK).indd 4-5VFM027_22EM1 (UK).indd 4-5 2022/4/6 8:49 AM2022/4/6 8:49 AM

67
features and parts
Accessories
SmoothScrape™ beater with exible edges
Scrapes the bowl walls whilst mixing for uniform consistency
without interruption. Ideal for creaming, sponge cakes, lighter
biscuits and cookies.
Wire whisk
For mixtures that need air incorporated. Ideal for meringues,
whisked sponges and whipping cream.
HeatSplash™ guard
3-in-1 guard minimises mess, allows you to easily add
ingredients and also retains heat while mixing.
Flat beater
For normal to heavy mixtures. Ideal for fruit cakes and recipes
with larger quantities of ingredients.
Dough hook
For mixing and kneading. Ideal for a variety of sweet and
savoury bread dough’s.
using your stand mixer
Before rst use
Make sure your stand mixer is switched off and unplugged from the mains
supply socket before cleaning, detaching or tting or before tting or removing
the beaters, dough hooks or whisk.
Before using your stand mixer for the rst time, wash the beaters, dough hook, whisk
and stainless steel bowl in warm, soapy water. Rinse and dry thoroughly. Do not use
harsh abrasives, chemicals or oven cleaners. Using a damp cloth or sponge, wipe the
exterior of the stand mixer.
Using
Always avoid contact with moving parts while the appliance is in operation.
Keep hands, hair, clothing as well as other utensils away from the beaters,
dough hook or whisk during operation. Never attempt to remove or replace
the beaters, dough hook or whisk whilst your stand mixer is in operation, or
plugged in to the mains supply.
1. Ensure that your stand mixer is unplugged from the supply socket and the
speed control dial is set to 0 (off).
Raising and lower the mixing head
To tilt mixer head, lift Tilt Release Lever (Figure A) and slowly lift mixer head until it
locks in the upright position. (Figure B)
To lower mixer head, grab head, lift Tilt Release Lever and gently lower mixer head,
ensuring it locks in downward position. A “click” sound will indicate the mixer head
has locked securely into position. (Figure C)
Figure A Figure B Figure C
VFM027_22EM1 (UK).indd 6-7VFM027_22EM1 (UK).indd 6-7 2022/4/6 8:49 AM2022/4/6 8:49 AM

67
features and parts
Accessories
SmoothScrape™ beater with exible edges
Scrapes the bowl walls whilst mixing for uniform consistency
without interruption. Ideal for creaming, sponge cakes, lighter
biscuits and cookies.
Wire whisk
For mixtures that need air incorporated. Ideal for meringues,
whisked sponges and whipping cream.
HeatSplash™ guard
3-in-1 guard minimises mess, allows you to easily add
ingredients and also retains heat while mixing.
Flat beater
For normal to heavy mixtures. Ideal for fruit cakes and recipes
with larger quantities of ingredients.
Dough hook
For mixing and kneading. Ideal for a variety of sweet and
savoury bread dough’s.
using your stand mixer
Before rst use
Make sure your stand mixer is switched off and unplugged from the mains
supply socket before cleaning, detaching or tting or before tting or removing
the beaters, dough hooks or whisk.
Before using your stand mixer for the rst time, wash the beaters, dough hook, whisk
and stainless steel bowl in warm, soapy water. Rinse and dry thoroughly. Do not use
harsh abrasives, chemicals or oven cleaners. Using a damp cloth or sponge, wipe the
exterior of the stand mixer.
Using
Always avoid contact with moving parts while the appliance is in operation.
Keep hands, hair, clothing as well as other utensils away from the beaters,
dough hook or whisk during operation. Never attempt to remove or replace
the beaters, dough hook or whisk whilst your stand mixer is in operation, or
plugged in to the mains supply.
1. Ensure that your stand mixer is unplugged from the supply socket and the
speed control dial is set to 0 (off).
Raising and lower the mixing head
To tilt mixer head, lift Tilt Release Lever (Figure A) and slowly lift mixer head until it
locks in the upright position. (Figure B)
To lower mixer head, grab head, lift Tilt Release Lever and gently lower mixer head,
ensuring it locks in downward position. A “click” sound will indicate the mixer head
has locked securely into position. (Figure C)
Figure A Figure B Figure C
VFM027_22EM1 (UK).indd 6-7VFM027_22EM1 (UK).indd 6-7 2022/4/6 8:49 AM2022/4/6 8:49 AM

89
using your stand mixer
To attach bowl
1. Lift the Tilt Release Lever and tilt mixer head back.
2. Place bowl on bowl locking plate.
3. Turn bowl gently in a clockwise direction so that bowl handle are perpendicular
to base.
4. Plug your mixer into the mains supply socket.
To remove bowl
1. Lift the Tilt Release Lever and tilt mixer head back.
2. Turn bowl counter clockwise and lift off locking plate.
using your stand mixer
To install attachments
1. Ensure the Control Dial is in the off position.
2. Lift the Tilt Release Lever and tilt mixer head back.
3. Align the key positions of the beater shaft and attachment, push upward.
4. Twist counter clockwise so that pin aligns with attachment notch and clicks into
position.
To remove attachments
1. Ensure the Control Dial is in the off position.
2. Lift the Tilt Release Lever and tilt mixer head back.
3. Press attachment upward as far as possible and turn clockwise.
4. Pull attachment from beater shaft.
NOTE: It is recommended to scrape food off attachment with a spatula/scraper
before removing.
VFM027_22EM1 (UK).indd 8-9VFM027_22EM1 (UK).indd 8-9 2022/4/6 8:49 AM2022/4/6 8:49 AM

89
using your stand mixer
To attach bowl
1. Lift the Tilt Release Lever and tilt mixer head back.
2. Place bowl on bowl locking plate.
3. Turn bowl gently in a clockwise direction so that bowl handle are perpendicular
to base.
4. Plug your mixer into the mains supply socket.
To remove bowl
1. Lift the Tilt Release Lever and tilt mixer head back.
2. Turn bowl counter clockwise and lift off locking plate.
using your stand mixer
To install attachments
1. Ensure the Control Dial is in the off position.
2. Lift the Tilt Release Lever and tilt mixer head back.
3. Align the key positions of the beater shaft and attachment, push upward.
4. Twist counter clockwise so that pin aligns with attachment notch and clicks into
position.
To remove attachments
1. Ensure the Control Dial is in the off position.
2. Lift the Tilt Release Lever and tilt mixer head back.
3. Press attachment upward as far as possible and turn clockwise.
4. Pull attachment from beater shaft.
NOTE: It is recommended to scrape food off attachment with a spatula/scraper
before removing.
VFM027_22EM1 (UK).indd 8-9VFM027_22EM1 (UK).indd 8-9 2022/4/6 8:49 AM2022/4/6 8:49 AM

10 11
using your stand mixer using your stand mixer
Figure E
1
2
3456
7
8
9
10
To attach HeatSplashTM Guard
1. Rotate Control Dial to off position “0” to turn unit off.
2. Unplug Stand Mixer.
3. After bowl and accessory are assembled to mixer, Gently lower mixer head,
ensuring it locks in downward position. A “click” sound will indicate the mixer
head has locked securely into position.
4. From the front of the mixer, slide the HeatSplash™ Guard over the bowl and
accessory until it is centered. The inner ring of the HeatSplash™ Guard should
t over the outer rim of the bowl. Note: The HeatSplash™ Guard must be
placed over both heat nozzles (Figure E).
To use HeatSplashTM Guard
1. When using HeatSoft™ Technology, use HeatSplash™ guard for best results.
2. While securing HeatSplash™ Guard with one hand, pour the ingredients into
the bowl through the pouring chute.
To remove HeatSplashTM Guard
1. Rotate Control Dial to off position “0” to turn unit off.
2. Unplug Stand Mixer.
3. Lift the front of the HeatSplash™ Guard clear of the bowl rim and pull forward.
Figure F
LED light
This stand mixer has an LED light on the mixer head (Figure F). The LED light allows
for better visibility of the mixture to ensure desired consistency. The LED light will
switch on automatically when the mixer is in operation and automatically switch off
when the mixer is not in use.
VFM027_22EM1 (UK).indd 10-11VFM027_22EM1 (UK).indd 10-11 2022/4/6 8:49 AM2022/4/6 8:49 AM