Bristan HOU BSM C Wiring diagram

Installation Instructions
& User Guide
Please leave these instructions
with the end user
Pack Contents
Dynamic Water Pressure
Maximum Static Pressure: 10.0 bar
Max: 5.0 bar
Inlet Water Temperature Inlet Connections
Tools Required for Installation/ Maintenance
Operation
60°C
Maximum Hot 60°C
Pack Contents
Tools Required for Installation/ Maintenance
Operation
To replace any spare parts
for your tap, why not
scan the QR Code or
visit www.bristan.com
and search for your
product.
All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated and
receive regular maintenance in accordance with these instructions.
This product needs to be installed in accordance with, and meet the requirements of The Water Supply (Water
Fittings) Regulations (Northern Ireland) 2009 and The Water Supply (Water Fittings) (Scotland) Byelaws 2014.
For full Installation Requirements & Notes (IRN) please visit www.wrasapprovals.co.uk/approvals-directory
Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc.
Full access must be made available for future maintenance/servicing purposes.
This product must not be modified in any way as this will invalidate the guarantee.
Prior to Installation
Outlet
Spare Parts
Specifications
3/4” BSP
Min: 0.2bar
x1
Handset
Rubber Washer
Backnut
Hourglass Tap
Hose
x1
x2
x1
Bracket
x1 Hot
Cold
On
On
Pull up to divert to handset
Push down the diverter to divert
back to bath fill
Adjustable Spanner Hexagonal Key
(Grub Screws)
Box Spanner
(Cartridge)
Box Spanner
(Inlets)
PencilSafety GlassesDrill
2.5mm 17mm
ø6mm 32mm
Philips Head
Screwdriver
Size 1
10mm
Hexagonal Key
(Diverter)
HOU BSM C (D6)
Pressure
BAR
1.0
5.0
4.0
2.0 3.0
0.
M24 Male Flow
Straightener

2Position the wall bracket where
you want it and mark out where
to drill. Make sure the hose and
handset can reach.
On most
models, the
screw holes are
large enough
to fit a pencil
through for
easy marking.
Maintenance - Diverter Replacement
1
Unscrew the
hose from
the elbow
connection.
2Unscrew the
diverter head and
lift o. Remove grub
screw with hex key.
3Pull elbow
connection
downwards
to remove.
Insert hex key into
bottom of diverter
and unscrew.
5
14mm
2.5mm
4
7
Reverse the steps to
replace the diverter.
123
Remove
the diverter.
4
5
6Check diverter
and O-rings
for any damage,
then soak using a
suitable solution
to de-scale.
Installation - Wall Bracket
1
4
Check handset
sits securely
on the wall
bracket and
there is no
movement
3Drill hole(s) and fit wall
plug(s) and then secure
wall bracket to wall using
screw(s) provided.
Once fixed,
replace the
bracket lid
IMPORTANT
Prior to drilling
into walls, check
there are no hidden
electrical wires,
cables or water
supply pipes
Observe screw
holes inside of
the bracket
Remove the bracket
lid to reveal the
screw holes
Your bracket is
now ready to use