BRK electronic SA350B User manual

SMOKE
ALARM
CAT. SA350B
10-YEAR
LITHIUM POWER
10 years of continuous protection.
No battery change required. Provides
audible notice when alarm has
reached its end of life.
TAMPERPROOF
SEALED ALARM
Powercell cannot be removed.
DUAL IONIZATION
Dual Ionization sensing chamber.
Generally more effective at detecting
small particles produced by flaming
fires.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT
Locks alarm to mounting bracket.
Perfect for apartment, dormitory or
hotel applications.
Description:
The BRK SA350B (model 0827) is a battery operated, 9V lithium power cell single
station smoke alarm specifically designed for residential and institutional applica-
tions including sleeping rooms of hospitals, hotels, motels, dormitories and other
multi-family dwellings as defined in standard NFPA 101. This unit complies with
UL217, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after
the above agencies. It meets building codes where tamperproof 10-year sealed
battery operated smoke alarms are required.
BRK SA350B features a dual ionization smoke sensing chamber, an 85 dB horn,
a sealed 10-year lithium power cell power supply that is permanently installed, a
single button for test/silence and a red LED that blinks to indicate unit is receiving
power. The tamperproof design will not allow the powercell to be removed. The
low power warning indicator will cause the alarm to “chirp” when it reaches the
end of its service life and needs to be replaced. Upon end of life, the unit meets
UL requirements for disabling the alarm and non-reinstallation of unit to mounting
bracket. Designed for surface mounting, the SA350B includes mounting anchors
and screws. Includes a gasketless base for easy installation and a new mounting
bracket that keeps the alarm secure over a wide rotation range to allow for perfect
alignment.
Sealed Lithium Power Cell
Listed to
Standard
UL 217
10-YEAR SEALED

CAT. SA350B
ARCHITECTURAL AND ENGINEERING SPEC
TECHNICAL SPECS
SHIPPING SPECS
INSTALLATION OF ALARM
The smoke alarm shall be a BRK Model 0827 (cat. no. SA350B) and shall provide at a
minimum the following features and functions:
1. A dual ionization sensing chamber.
2. The unit shall be capable of self restoring.
3. Powered by a sealed 10-year lithium powercell with a tamperproof design. The
tamperproof design shall not allow the powercell to be removed. A low power
warning indicator shall cause the alarm to “chirp” when it reaches the end of
its service life and needs to be replaced. Upon end of life, the unit shall meet UL
requirements for disabling the alarm and the non-reinstallation of unit to mounting
bracket.
4. A solid state piezo horn rated at 85 dB at 10 feet.
5. A visual LED power-on indicator to confirm unit is receiving power or is in alarm.
6. A full function test button. The test button should check all alarm functions by
stimulating the chamber to simulate a smoke condition, causing the unit to alarm
and also has a silence feature to silence unwanted nuisance alarms.
7. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 90%.
8. The unit shall contain mounting hardware and shall be listed for wall or ceiling
mounting.
9. The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72,
NFPA 101, ICC.
Alarm Dimensions: 5.6” dia x 2.0”H
Weight: 6.3 oz
Operating Voltage: 9V Lithium Power Cell
Temperature Range: 40°F (4°C) to 100°F (38°C)
Humidity Range: 10% to 95% relative humidity (RH)
Audio Alarm: 85dB at 10 feet
Test/Silence: Electronically simulates smoke condition, causing the
unit to alarm. Press and hold test/silence button.
Alarm Reset: Automatic when smoke clears
Smoke Sensor: Dual Ionization
Indicator Lights/Sounds:
DC Power: Intermittent Red LED
Local Alarm: Audio alarm and rapidly flashing Red LED
Listing: Listed to UL217 Standard
Individual Carton Dimensions 5.69 ”L x 2.25”W x 5.59”H
Weight 0.51 lbs.
Cube 0.04 ft3
UPC 0 29054 01474 0
Master Carton Dimensions 11.94”L x 7.12”W x 6.38”H
Master Pack 6
Weight 3.5 lbs.
Cube: 0.32 ft3
I2of5: 600 29054 01474 2
Pallet Information
Cases per Layer 20
Number of Layers: 7
Cases per Pallet: 140
Units per Pallet: 840
Cube: 49.3 ft3
Weight: 552 lbs.
©2014 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM3203final
brkelectronics.com
Installation of this smoke alarm must conform to NFPA 72. Always check your local
building codes. Follow all instructions for placement as outlined in the user’s manual in
sections titled “Recommended Locations for Smoke Alarms” and “Locations to Avoid for
Smoke Alarms”.
THE PARTS OF THIS ALARM
1. Mounting Bracket
2. Mounting Slots
3. De-activation Tab (located
under label)
4. Activation (Shipping tab.
Remove and discard.)
MOUNTING
BRACKET
TOP VIEW SIDE VIEW
5.6”
2.0”
Activating Alarm De-activating Alarm
1
3
2
2
4
3