Broan 741BR Installation instructions

®
Page 4
MODELS 741BR • 741SN • 741WH • 741BRFL • 741WHFL
USE AND CARE USE AND CARE
WARNING:DISCONNECTELECTRICALPOWERSUPPLYAND
LOCKOUT SERVICE PANELBEFORE CLEANING ORSERVIC-
ING THIS UNIT.
BULB REPLACEMENT
Remove finial nut and cap and remove glass shade. Replace bulb
or bulbs as required. Replace glass shade, finial cap & securely
tighten finial nut.
Models 741BR, 741SN & 741WH
Use 60 Watt maximum incandescent bulb.
Models 741BRFL & 741WHFL:
Useonlythefollowing13Wattfluorescentlamps:
Broan 97010729,
Sylvania CF13DD827, Phillips PL-C13W/27/USA, GeneralElec-
tric
F13DBX23T4/SPX27, Osram CF13DD827, NEMA Type
CFQ13W/GX23.
MOTOR LUBRICATION
The motor is permanently lubricated. Do not oil or disassemble
motor.
CLEANING
TO CLEAN GLASS SHADE AND GRILLE PAN:
Remove finial nut and finial cap and remove glass shade. Shade
can be wiped clean with a mild detergent solution or glass cleaner
and dried with a soft cloth. Remove 2 bulbs. Grille pan may be
gentlyvacuumedand wiped cleanwith a softcloth.Never use abra-
sive cloth, steel wool pads or scouring powders on glass shade or
grille pan. METAL AND ELECTRICAL PARTS SHOULD NEVER
BE IMMERSED IN WATER.
TO CLEAN FAN ASSEMBLY:
Remove grille pan and unplug fan assembly (black receptacle).
Gently vacuum fan, motor and interior of housing. METAL AND
ELECTRICAL PARTS SHOULD NEVER BE IMMERSED IN WA-
TER.
SERVICE PARTS
WARRANTY
99042912F
BROAN-NUTONE ONE YEAR LIMITED WARRANTY
Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from
defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part
which is found to be defective under normal use and service.
THISWARRANTYDOESNOTEXTENDTOFLUORESCENTLAMPSTARTERSANDTUBES.Thiswarrantydoes
not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse,
negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or
installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some
states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
BROAN-NUTONE’SOBLIGATION TOREPAIRORREPLACE,ATBROAN-NUTONE’SOPTION, SHALLBE THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT
BELIABLE FORINCIDENTAL, CONSEQUENTIALORSPECIAL DAMAGESARISING OUTOF ORIN CONNEC-
TIONWITHPRODUCTUSEORPERFORMANCE.Somestatesdonotallowtheexclusionorlimitationofincidental
or consequential damages, so the above limitation or exclusion may not apply to you.
Thiswarranty givesyou specificlegal rights,andyoumayalsohaveotherrights,whichvaryfromstatetostate.This
warranty supersedes all prior warranties.
Toqualifyfor warranty service, you must(a)notify Broan-NuTone at the addressstatedbelow or telephone: 1-800-
637-1453, (b) give the model number and part identification and (c) describe the nature of any defect in the product
or part. At the time of requesting warranty service, you must present evidence of the original purchase date.
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
KEY PART NO. DESCRIPTION
1 97013913 Finial Nut - Bright Brass
97015574 Finial Nut - Satin Nickel
97013914 Finial Nut - White
2 97013915 Finial Cap - Bright Brass
97015575 Finial Cap - Satin Nickel
97013916 Finial Cap - White
3 99523652 Shade Mounting Rod
4 99524076 Washer
5 97015320 Lamp Socket (2 req.) (Includes
mounting washer and nut)
(741BR, 741SN, 741WH)
6 97015313 Wire Harness
7 99523640 Fluorescent Lamp Holder
(2 req.)(741BRFL, 741WHFL)
8 99523638 #6B-20 x 3/8” Pan Hd. Screw
(4 req.)(741BRFL, 741WHFL)
9 99160225 #8-32 x 1/2” Rd. Hd. M. Screw
(4 req.)(741BRFL, 741WHFL)
10 97015321 Ballast Transformer (2 req.)
(741BRFL, 741WHFL)
11 99260425 #8-32 Serrated Hex Locknut
(4 req.)(741BRFL, 741WHFL)
12 99260428 Motor Nut, #6-32 Hex (2 req.)
13 99150618 Grille Screw
14 97014926 Motor Plate
15 99080522 Motor
16 99110446 Blower Wheel
17 99270981 Lamp Receptacle, White
18 99270982 Motor Receptacle, Black
19 98009612 Wiring Panel
20 99150471 Ground Screw
21 99170245 Screw, #8-18 x 3/8”
22 98008868 Wiring Plate
23 97014185 Damper/Duct Connector
24 97014922 Housing Assembly
A99523699 Light Fixture Assembly (741BR)
(Includes Glass Shade,
Grille/Pan and Key Nos. 1
thru 11)
99523770 Light Fixture Assembly (741SN)
99523700 Light Fixture Assembly (741WH)
99523701
Light Fixture Assembly (741BRFL)
99523702 Light FixtureAssembly (741WHFL)
B97015312 Blower Assembly
(Includes Key Nos. 12 thru 16)
C97015171 Wire Panel Assembly
(Includes Key Nos.17, 18, 19)
Order replacement parts by “PART NO.” - not by “KEY NO.”
12
3
35
6
7
8
9
10
11
6
12 13
14
15
16
17 18
19 21
22
23 24
A
B
C
4
4
20

®
Page 1
MODELS 741BR • 741SN • 741WH • 741BRFL • 741WHFL
DECORATIVE SERIES
CEILING VENTILATORS
READ AND SAVE THESE INSTRUCTIONS
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
JURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If
you have questions, contact the manufacturer at the address or
telephone number listed in the warranty.
2. Beforeservicing orcleaning unit,switch poweroffatservice panel
andlockthe service disconnectingmeans to preventpowerfrom
being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a quali-
fied person(s) in accordance with all applicable codes and stan-
dards, including fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to
prevent backdrafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
andtheAmerican Society forHeating,Refrigeration andAirCon-
ditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage elec-
trical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
WARNING
7. NEVER place a switch where it can be reached from a tub or
shower.
8. Fluorescent models only: Do not use a dimmer switch to con-
trol the light of this unit.
9. This unit must be grounded.
10. This unit is U.L. listed. Type I.C. inherently protected.
CAUTION
1. For general ventilating use only. Do not use to exhaust hazard-
ous or explosive materials and vapors.
2. This product is designed for ceiling installation only. This prod-
uct is designed for installation in ceilings up to a 12/12 pitch.
Ductwork must point up. DO NOT MOUNT THIS PRODUCT IN
A WALL.
3. The light fixture assembly must be mounted to the fan housing
assembly included with this product. Do not mount the light
fixture assembly to a wiring outlet box.
4. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
unit.
5. Please read specification label on product for further informa-
tion and requirements.
Installer: Leave this manual with the homeowner.
Homeowner: Use and Care information on page 4.
TYPICAL INSTALLATIONSTYPICAL INSTALLATIONS
16”-ON-CENTER CEILING JOISTS
Housing mounted directly to joist.
HOUSING
CEILING
JOIST
MOUNTING TABS
CEILING
MATERIAL
POWER CABLE
GRILLE
PAN
GLASS
LIGHT SHADE
HOUSING
CEILING
JOIST
MOUNTING TABS
CEILING
MATERIAL
POWER CABLE 4" ROUND
DUCT
ADDITIONAL
FRAMING
GRILLE
PAN
GLASS
LIGHT SHADE
24”-ON-CENTER CEILING JOISTS
Housing mounted to additional framing.