Brother HL-L9200CDW User manual

1
2
3
4
1
2
3
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord Quick Setup Guide
Product Safety GuideCD-ROMBelt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug•
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
HL-L9200CDW.
You must purchase the correct interface cable for the interface you•
want to use:
USB cable
We recommend using a USB2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1Remove the packing material from the machine
2Load paper in the paper tray
3Connect the power cord and turn on the machine
Press
1. > General Setup > Local Language.
Press your language.
2.
On the machine’s Touchpanel, press
3. .
4Select your language
Adjust the paper guides.
Quick Setup Guide
HL-L9200CDW / HL-L9200CDWT
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
ENG

Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows®)
Conguration without using the CD-ROM (Windows®without CD-ROM drive or Macintosh)
5
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2. solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection
Press . Press Setup Wizard. Press Yes for Wireless Network.