Brother DCP-L5518DN User manual

Unpack the machine and check the components
AC Power Cord
USB Interface Cable
Toner Cartridge and Drum Unit
Assembly
(Installed in the machine)
Quick Setup Guide Product Safety Guide
1Remove the packing materials and re-install the toner cartridge and drum unit assembly
Remove the orange part.
2Load paper in the paper tray
Adjust the paper
guides.
Do not exceed this mark.
Discard the
silica gel pack.
3Connect the power cord and turn the machine on
Back Front
NOTE:
•The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
•USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
•Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
(Network cable is not a standard accessory.)
•The screens and images in this Quick Setup Guide show the
MFC-L5728DW.
Quick Setup Guide
Read the Product Safety Guidefirst,thenreadthisQuick Setup Guide for the correct installation procedure.
EN
DCP-L5518DN / MFC-L5718DN / MFC-L5728DW
Operation Videos:
www.95105369.com Installation & Using Videos
1
CHN-ENG
Version 0

5Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen
instructions and
prompts.
setup.brother.com
Setup Finished
You can now print and scan
using your machine.
Tocheckforthelatestfirmware,
visit support.brother.com/up7.
Can’t Connect? Check the following:
Restart your wireless access point/
router (if possible).
Disconnect the cable.
Wired network
USB connection
Ifstillnotsuccessful,goto .
Ifstillnotsuccessful,visitwww.95105369.com
for FAQs and Troubleshooting.
Restart your machine and
computer,andthengoto .
6Manual wireless setup (Wireless models)
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router and
write them in the table provided below.
SSID (Network Name)
Network Key (Password)
Ifyoucannotfindthisinformation,askyournetwork
administrator or wireless access point/router
manufacturer.
SSID: XXXXXXX
Network Key: XXXX
Press >
[Find Wi-Fi Network].
Follow the LCD instructions.
Go to to install software.
Ifsetupisnotsuccessful,restart
your Brother machine and your
wirelessaccesspoint/router,
and repeat .
Ifstillnotsuccessful,visit
www.95105369.com.
Select the SSID (Network Name)
for your access point/router and
enter the Network Key (Password).
When the wireless setup is
successful,thetouchscreen
displays [Connected].
Important Notice for Network Security:
The default password to manage this
machine’s settings is located on the back of
the machine and marked “Pwd”.
We recommend immediately changing the
default password to protect your machine from
unauthorised access.
Ifthewirelesssetupisnotsuccessful,trytosetuptheconnectionmanually.
Wireless network
4Connect the telephone line cord (For MFC models)
Ifyoudonotplantousethefaxfeatureonthismachine,gotostep .
The telephone line cord is not included in the box.
Brother Mobile Connect
Android/iOS/HarmonyOS
Fordetailedmachineinformationandproductspecifications,seetheOnline User's Guide at www.95105369.com. ©2023BrotherIndustries,Ltd.Allrightsreserved.
2