Brother DSMobile 920DW User manual

Brother DSMobile 920DW Quick Start Guide
Getting started:
1. Press the power button ( ) to turn on the scanner. If the battery is low, connect the
USB cable to your computer to charge.
2. Press the OK button to choose between SD card and PC mode.
To scan to an SD card (recommended):
1. Insert the SD card into the scanner using the slot on the front.
2. Use the Color/Mono, 2 side/1 side, and PDF/JPG buttons to set the type of scanning you
would like.
3. Insert your document into the scanner. It will “grab” it, and begin scanning automatically.
4. Transfer files to your computer via USB, SD card reader, or WiFi
To transfer files via USB or SD card:
1. Connect the USB cable to the scanner and your computer, or insert the SD card into
your computer’s SD card reader (if available).
2. Open the USB drive or SD card folder, and transfer your files. Delete your files from
the SD card after transferring.
To transfer files via WiFi:
1. Turn on WiFi mode on the scanner
2. Wait for the WiFi light to turn blue, and then select “Brother DS-920DW-da90” from your
device’s WiFi settings. The security key for the device is “dsmobile”
3. Go to http://10.10.100.1/ in your web browser
a. The username is prplscanner
b. The password is ParkRidge1913
4. Select your documents and either Download or Delete (if you don’t see your files when it
first opens, click the “Mode” button to change from PDF or JPG). Delete your files after
transferring.

To scan directly to the computer:
1. Install the Scanner Driver using the CD-ROM provided, or download from this site:
https://bit.ly/3brQTo4
2. Connect scanner to computer with USB cable.
3. Press power button to turn on the scanner. Press OK button until you are in PC mode
4. Open DSMobile Capture and select the scanner
5. Select your file type output and save location
6. Place the document you want to scan face up in the scanner, and click Scan
For troubleshooting or more help, visit the Brother site:
http://bit.ly/ds-920DW