Brother HL-L5200DW User manual

Unpack the machine and check the components
NOTE:
• Manuals in Spanish for this model are available on the Brother Solutions Center. (USA
only): solutions.brother.com/manuals
Los manuales en español de este modelo están disponibles en el Brother Solutions
Center. (Solamente en los Estados Unidos): solutions.brother.com/manuals
• The available connection interfaces vary depending on the model.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
Network cable
(For HL‑L5100DN / HL‑L5200DW(T) / HL‑L6200DW(T))
Use a straight‑through Category 5 (or greater) twisted‑pair cable.
Parallel cable
(For HL‑L5000D)
Use the parallel cable provided with the machine.
• The illustrations in this Quick Setup Guide show the HL‑L6200DW.
Remove the packing materials and install the drum unit and toner cartridge assembly
Load paper in the paper tray
Connect the power cord and turn on the machine
Select your language (if needed)
Drum Unit and Toner
Cartridge Assembly
(pre‑installed)
Installation CD‑ROM AC Power Cord
Quick Setup Guide Product Safety Guide Reference Guide
1. Press ▼ or ▲ to select [General Setup], and then press OK.
2. Press OK to select [Local Language].
3. Press ▼ or ▲ to select your language, and then press OK.
4. Press Cancel.
3
4
2
1
Adjust the paper
guides.
Back Front
Remove the orange part.Discard the
silica gel pack.
Quick Setup Guide
HL‑L5000D / HL‑L5100DN / HL‑L5200DW / HL‑L5200DWT /
HL‑L6200DW / HL‑L6200DWT Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
Watch our Video FAQs for
help with setting up your
Brother machine:
solutions.brother.com/videos.
D004LY001‑00
USA/CAN
Version 0

Finish
Connect your machine and install software
Macintosh/Windows®computer without CD‑ROM drive
Download the full driver and software package from
the Brother Solutions Center.
(Macintosh) solutions.brother.com/mac
(Windows®) solutions.brother.com/windows
Finish
5
Follow the on‑screen instructions
to continue installation.
Print using your mobile device (not available for HL‑L5000D)
If using a wireless network connection:
When the Wireless Device Setup screen
appears, select Setup without a USB cable
(Recommended).
NOTE:
• When finished, restart your computer.
• If connection is unsuccessful, see Cannot set up
your machine? below.
Download “Brother iPrint&Scan” to start using your machine with mobile devices.
solutions.brother.com/ips
NOTE:
If the Brother screen does not appear automatically,
click (Start) > Computer (My Computer).
(For Windows®8: click the (File Explorer) icon
on the taskbar, and then go to Computer (This
PC).)
Double‑click the CD‑ROM icon, and then double‑
click start.exe.
Windows®computer with CD‑ROM drive For HL‑L5000D
For other models
Choose your Connection Type:
AirPrint is available for OS X and iOS users.
For more information, see the AirPrint Guide on your model’s Manuals
web page.
solutions.brother.com/manuals
Follow the on‑screen instructions
to continue installation.
Finish
When instructed, go to your machine.
Press the (WiFi) button.
Follow the on‑screen instructions
to continue installation.
Before printing from your mobile device, your machine must be configured according to step or Alternate wireless configuration method (Setup Wizard).
Follow the on‑screen instructions
to continue installation.
Alternate wireless configuration method (Setup Wizard)
a. Press ▲ or ▼ to select the [Network] option,
and then press OK.
b. Press ▲ or ▼ to select the [WLAN] option,
and then press OK.
c. Press ▲ or ▼ to select the [Setup Wizard]
option, and then press OK.
d. When [WLAN Enable?] appears, press ▲ to
select [On].
Select the SSID.
Enter the Network key.
NOTE:
For information on how to enter text,
see the printed Reference Guide.
To use with your computer, follow Step until the Select Machine
screen appears, listing all machines in your network.
If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
The LCD displays
[Connected].
Find your
SSID: XXXXXXX
Network key: XXXX
To use with your mobile device, go to Print using your mobile device (not available for HL‑L5000D).
Follow the on‑screen instructions
to continue installation.
Select your machine. Finish
NOTE:
• When finished, restart your computer.
• If connection is unsuccessful, see Cannot set up
your machine? below.
Restart your wireless access point/router.
Cannot set up your machine?
Wired network
USB/Parallel
Wireless network
Disconnect the cable. Restart your machine,
computer and/or mobile
device.
Repeat .
Go to Alternate wireless
configuration method (Setup Wizard).
NOTE:
If you repeat these steps and connection is still unsuccessful, please visit the Brother Solutions Center at: http://support.brother.com.
Brother support website http://support.brother.com