Brother HL-L5218DN User manual

Unpack the machine and check the components
AC Power Cord
USB Port Cover
(Not included in all models)
Toner Cartridge and Drum Unit
Assembly
(Installed in the machine)
Quick Setup Guide Product Safety Guide
1Remove the packing materials and re-install the toner cartridge and drum unit assembly
Remove the orange part.
2Load paper in the paper tray
Adjust the paper
guides.
3Connect the power cord and turn the machine on
Back Front
Do not exceed this mark.
Power button location may vary depending
on the model.
NOTE:
•The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
•USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
•Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
(Network cable is not a standard accessory.)
•The illustrations in this Quick Setup Guide show the HL-L6418DW.
Discard the silica
gel pack.
USB Interface Cable
Quick Setup Guide
Read the Product Safety Guidefirst,thenreadthisQuick Setup Guide for the correct installation procedure.
Operation Videos:
www.95105369.com
EN
HL-L5218DN / HL-L5228DW / HL-L6418DW
Installation & Using Videos
1
CHN-ENG
Version 0

4Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Can’t Connect? Check the following:
Restart your wireless access point/
router (if possible).
Disconnect the cable.
Wired network
USB connection
Ifstillnotsuccessful,goto .
Ifstillnotsuccessful,visitwww.95105369.com
for FAQs and Troubleshooting.
Restart your machine and
computer,andthengoto .
5Manual wireless setup (Wireless models)
Find your SSID (Network Name) and
Network Key (Password) on your wireless
access point/router and write them in the
table provided below.
SSID
(Network Name)
Network Key
(Password)
Ifyoucannotfindthisinformation,ask
your network administrator or wireless
access point/router manufacturer.
SSID: XXXXXXX
Network Key: XXXX
For LCD models
Toselectmenuoptions,press
▲or▼,andthenpress确定
to confirm.
Select [Network] >
[WLAN(Wi-Fi)] >
[Find Network].
Follow the LCD instructions.
For touchscreen models
Press >
[Find Wi-Fi Network].
Follow the LCD instructions.
Go to to install software.
Ifsetupisnotsuccessful,restartyour
Brother machine and your wireless
accesspoint/router,andrepeat .
Ifstillnotsuccessful,visit
www.95105369.com.
Select the SSID (Network Name) for your
access point/router and enter the Network
Key (Password).
Whenthewirelesssetupissuccessful,the
touchscreen/LCD displays [Connected].
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen
instructions and
prompts.
setup.brother.com
Setup Finished
You can now print using your
machine.
Tocheckforthelatestfirmware,
visit support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this
machine’s settings is located on the back of
the machine and marked “Pwd”.
We recommend immediately changing the
default password to protect your machine from
unauthorised access.
For LCD models
Pressandhold(orpressrepeatedly)▲/▼
to select one of the following characters:
0123456789abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~
Ifthewirelesssetupisnotsuccessful,trytosetuptheconnectionmanually.
Wireless network
Brother Mobile Connect
Android/iOS/HarmonyOS
Fordetailedmachineinformationandproductspecifications,seetheOnline User's Guide at www.95105369.com. ©2023BrotherIndustries,Ltd.Allrightsreserved.
2